Incoming mesage is splitted in several parts

[Dennis]

Firstly, thank you very much for the great software!

There's one little bug found so far.

While recieving or synchronizing incoming sms meassages. If they are large enough, MyPhoneExplorer imports one sms (consisting for example of 3 parts) as 3 separate messages. Is there any way to fix this?

However, it also happens pretty often with other synching software, not particulary with MPE.

[FJ]

Do you see the message in the phone as ONE message ?

[Dennis]

Yes, my SE K610 shows such kind of messages as one, as it should be.

For example, when the phone is connected to MPE and such long message is coming, I see 3 baloons with different parts of the message and only then the phone rings and shows that this message has really come.

[FJ]

OK, connect your phone to MyPhoneExplorer, send yourself a long message (3 parts), then post the logfile here.

[Dennis]

Here's the extract of a recent log, when I recieved a message of 2 parts (and my Phone showed it correctly, but MPE - as 2 different messages).

It was recieved at 19:16 (as shown in MPE).

19:15:30.84 [RX]: OK
19:15:30.84 [TX]: AT+CSQ
19:15:30.90 [RX]: AT+CSQ19:15:30.90 [RX]: +CSQ: 17,99
19:15:30.92 [RX]: OK
19:15:40.92 [TX]: AT+CBC
19:15:41.00 [RX]: AT+CBC19:15:41.00 [RX]: +CBC: 1, 85
19:15:41.01 [RX]: OK
19:15:41.01 [TX]: AT+CSQ
19:15:41.09 [RX]: AT+CSQ19:15:41.09 [RX]: +CSQ: 18,99
19:15:41.10 [RX]: OK
19:15:51.12 [TX]: AT+CBC
19:15:51.18 [RX]: AT+CBC19:15:51.18 [RX]: +CBC: 1, 85
19:15:51.21 [RX]: OK
19:15:51.21 [TX]: AT+CSQ
19:15:51.29 [RX]: AT+CSQ19:15:51.29 [RX]: +CSQ: 18,99
19:15:51.31 [RX]: OK
19:16:01.31 [TX]: AT+CBC
19:16:01.37 [RX]: AT+CBC19:16:01.37 [RX]: +CBC: 1, 85
19:16:01.38 [RX]: OK
19:16:01.38 [TX]: AT+CSQ
19:16:01.40 [RX]: AT+CSQ19:16:01.40 [RX]: +CSQ: 19,99
19:16:01.40 [RX]: OK
19:16:11.40 [TX]: AT+CBC
19:17:01.95 [RX]: OK
19:17:01.95 [TX]: AT+CSQ
19:17:01.96 [RX]: AT+CSQ19:17:01.96 [RX]: +CSQ: 23,99
19:17:01.96 [RX]: OK
19:17:08.85 [RX]: +CMTI: "ME",646
19:17:08.85 Settimeout: RT=15000 WT=1000
19:17:08.85 [TX]: AT+CPMS="ME","ME"
19:17:08.88 [RX]: AT+CPMS="ME","ME"19:17:08.88 [RX]: +CPMS: 981,1000,981,1000,981,1000
19:17:08.88 [RX]: OK
19:17:08.88 [TX]: AT+CMGR=646
19:17:08.92 [RX]: AT+CMGR=64619:17:08.92 [RX]: +CMGR: 0,,159
19:17:08.92 [RX]: 07919730071111F1640B919730763458F900007030429161810CA006080400820201BA562A9502F5542A552A050A83C86F50FDFC6EBFDD65773A0C82CBDFF4F4DD9DD6E741C47BFA1CA697D961105CFE3ECBCBF3791884A2BBCA20B8FC4D4FDFDD697D1EC42CBBD3BB560A54A68741F3703BAC0E83DAF9391B24CEB3C320B8FC4DBEA7DD757A18440EB3CBEBF76FD74AA54028BAAB0C528741E976991D06DD41F734B90EEAE154
19:17:08.92 [RX]: OK
19:17:09.07 SMS-Datenbank gespeichert. Dauer:15 SMS:840
19:17:11.96 Settimeout: RT=1500 WT=800
19:17:11.96 [TX]: AT+CBC
19:17:11.98 [RX]: AT+CBC19:17:11.98 [RX]: +CBC: 1, 86
19:17:11.98 [RX]: OK
19:17:11.98 [TX]: AT+CSQ
19:17:12.00 [RX]: AT+CSQ19:17:12.00 [RX]: +CSQ: 23,99
19:17:12.00 [RX]: OK
19:17:16.40 [RX]: +CMTI: "ME",649
19:17:16.40 Settimeout: RT=15000 WT=1000
19:17:16.40 [TX]: AT+CPMS="ME","ME"
19:17:16.43 [RX]: AT+CPMS="ME","ME"19:17:16.43 [RX]: +CPMS: 982,1000,982,1000,982,1000
19:17:16.43 [RX]: OK
19:17:16.43 [TX]: AT+CMGR=649
19:17:16.51 [RX]: AT+CMGR=64919:17:16.51 [RX]: +CMGR: 0,,159
19:17:16.51 [RX]: 07919730071111F1640B919730763458F900007030429161220CA0060804008202022A550A945228C2A0F65B1D06ADC36B903CAC07E9C3A07A1B74D787D9E179089506D1C36BD01DE42EB741F2B0FE4D0BCBDFF7303B3C67ADDF6732E8AE0FB3C373963B4C7E83E0F2B4DE1DA6EB4EAD5428A55081542095020A9DB2CA73761A74CF83DC65D0FDAD9787D5E132BDCCA2BF417390FB4D2BDFD76F7548A1D5B7EF285B2E756FEBB5
19:17:16.51 [RX]: OK
19:17:16.65 SMS-Datenbank gespeichert. Dauer:16 SMS:841
19:17:22.00 Settimeout: RT=1500 WT=800
19:17:22.00 [TX]: AT+CBC
19:17:22.01 [RX]: AT+CBC19:17:22.01 [RX]: +CBC: 1, 86
19:17:22.01 [RX]: OK
19:17:22.01 [TX]: AT+CSQ
19:17:22.04 [RX]: AT+CSQ19:17:22.04 [RX]: +CSQ: 23,99
19:17:22.04 [RX]: OK

[Dennis]

FJ, is it possible to make manual correction for this problem in MPE? For example, as in Sent-messages to attach proper date. So that one can right-click message and combine 2 or messages together?

[FJ]

Sorry for the late answer.
The bug will be fixed in the next version.

[Dennis]

That would be really great! Thank you a lot!