MPE 1.8.7 opens briefly then closes

Anmeldedatum: 14.10.2016 Beiträge: 1

Windows 7. When I launch MPE 1.8.7, the program opens briefly and then immediately closes. I have used MPE for quite a while without problems. I have tried reinstalling - no luck. Have tried installing earlier versions - no luck. Have tried disabling antivirus - no luck. I guess there's something about my environment that causes MPE to immediately close after launching. Any suggestions? Thanks.

Anmeldedatum: 27.12.2016 Beiträge: 8 Wohnort: Vermont, America

I have been delighted with V1.8.0.6 for a long time & it always worked without any problems - I use the portable version.

Suddenly it began just opening then closing on its own very soon after.
I found the debug.txt file and it has not been written to since October 19, 2016 - so I renamed it to see if it would be replaced...
MPE opened, started to populate the device list, then closed itself.
No new debug.txt was created.

So - I got the latest version from your site and did a separate portable install at a different location - and it does the same thing right from the very 1st start - as soon as it connects to the phone.
I tried renaming the file 'general.ini' and the phone's data - and it re-opens, but ONLY until the phone is connected, than it closes again.
If I then delete the file 'general.ini' and the phone's data again it then re-opens, but with the same results.

Here is the content of 'debug.txt' from that one:
*****************************************
Logdatei MyPhoneExplorer
************************
Programmversion: 1.8.7 portable
Datum: 12/26/2016

18:14:02.62 Windows Version=5.1
18:14:02.62 Setting Port:
18:14:02.62 Setting Baud:
18:14:02.62 Avaiable Ports: COM0=;
18:14:02.62 Main Load frmSplash
18:14:02.62 Load frmSplash...
18:14:02.62 Show splash...
18:14:02.63 frmSplash geladen
18:14:03.09 Hauptfenster wird geladen
18:14:03.35 Sidebar fertig geladen
18:14:03.42 UC SMS wird geladen
18:14:03.48 UC Phonebook wird geladen
18:14:03.51 UC Phonebook fertig geladen
18:14:03.51 UC Calls wird geladen
18:14:03.54 UC Organizer wird geladen
18:14:03.62 Organizer initiated
18:14:03.65 Startpage=1
18:14:03.67 UC Filebrowser wird geladen
18:14:03.73 UC Filebrowser fertig geladen
18:14:03.73 UC AppBrowser wird geladen
18:14:03.75 UC Notes wird geladen
18:14:03.75 UC Calls wird geladen
18:14:03.82 Setting Lastuser:
18:14:03.82 Lade Userdatenbank:
18:14:03.87 Kontakte geladen
18:14:03.88 ParseDialedCalls needed 0ms
18:14:03.92 Anrufe geladen
18:14:03.92 Organizer LoadUser DefaultTimeColWidth=133
18:14:03.92 Organizer geladen
18:14:03.92 Notizen geladen
18:14:03.92 SMS geladen
18:14:04.17 Could not load btDaemon!
18:14:04.18 Hauptfenster fertig geladen
18:14:14.82 RunADBCommand: start-server
18:14:14.95 ADB CommandResponse:
18:14:14.95 RunADBCommand: devices
18:14:15.09 ADB CommandResponse: List of devices attached
LG-LS860-1dc03fa device
18:14:15.09 Run DeviceTracker
18:14:15.10 Init Tracker
18:14:15.10 Device Tracker Message: OKAY0018LG-LS860-1dc03fa device

18:14:15.10 RunADBCommand: -s "LG-LS860-1dc03fa" forward tcp:5210 tcp:5210
18:14:15.25 ADB CommandResponse:
18:14:15.25 Try connecting to 127.0.0.1...
18:14:15.35 Connect to Android OK (127.0.0.1)
18:14:15.35 Settimeout: RT=2000 WT=500
18:14:15.35 bOpened=True
18:14:15.35 [TX]: AT+CGSN
18:14:15.37 [RX]: AT+CGSN
18:14:15.37 [RX]: 99000154051830
18:14:15.37 [RX]: OK
18:14:15.37 Settimeout: RT=15000 WT=1000
18:14:15.37 [TX]: AT*PIN?
18:14:15.37 [RX]: AT*PIN?
18:14:15.37 [RX]: *PIN: ACCESS OK,10
18:14:15.37 [RX]: OK
18:14:15.38 [TX]: ATI
18:14:15.38 [RX]: ATI
18:14:15.38 [RX]: lge LG-LS860
18:14:15.38 [RX]: OK
18:14:15.40 [TX]: AT*APPVERSION=1.8.7
18:14:15.40 [RX]: AT*APPVERSION=1.8.7
18:14:15.40 [RX]: 15,1.0.38
18:14:15.40 [RX]: OK
18:14:15.40 [TX]: AT+CSCS="UTF-8"
18:14:15.42 [RX]: AT+CSCS="UTF-8"
18:14:15.42 [RX]: OK
18:14:15.42 [TX]: AT*ECAM=1
18:14:15.43 [RX]: AT*ECAM=1
18:14:15.43 [RX]: OK
18:14:15.43 [TX]: AT+CBC
18:14:15.43 [RX]: AT+CBC
18:14:15.43 [RX]: +CBC: 1,73
18:14:15.45 [RX]: OK
18:14:15.45 [TX]: AT+CSQ
18:14:15.45 [RX]: AT+CSQ
18:14:15.45 [RX]: +CSQ: 99,99
18:14:15.46 [RX]: OK
18:14:15.46 Alle Verbindungsaktionen beendet
18:14:15.46 [TX]: AT*SOPS
18:14:15.46 [RX]: AT*SOPS
18:14:15.46 [RX]: *SOPS: Sprint,310120,
18:14:15.46 [RX]: OK
18:14:15.54 CheckUserDirectory for: lge LG-LS860 [99000154051830]
18:14:25.28 [RX]: *ALIVE: 1,73,99
18:14:30.79 Lade Userdatenbank: lge LG-LS860 [99000154051830]
**************************************

Thanks for any help.

Verfasst am: Sa Jan 14, 2017 23:38

MPE is a wonderful & useful tool - but seems abandoned now.

With no way to get help for it, how can we use it ??

Verfasst am: So Jan 15, 2017 00:55

smallhagrid hat Folgendes geschrieben:

MPE is a wonderful & useful tool - but seems abandoned now.
With no way to get help for it, how can we use it ??

Ummm, the phone app has just been updated, as has the PC client so I'm not sure where your 'abandoned' comes from.

As to the OP have you tried a Windows reinstall? A bit drastic but this usually needs to be done at irregular intervals. Sometimes the best solution is just to 'start again' and not know what the problem was, just that it's fixed.

Verfasst am: So Jan 15, 2017 01:03

Thanks Dvhttn.
I imagine that you are not the mod or dev here, yes ??

From the user's POV:

"....the phone app has just been updated, as has the PC client so I'm not sure where your 'abandoned' comes from."

When there are problems & weeks pass with no response from the dev, that usually shows something not so good has or is happening...

NEVER:

"As to the OP have you tried a Windows reinstall? A bit drastic but this usually needs to be done at irregular intervals."

Since working as a full-time PC tech for 20+ years I have found MANY other ways to solve problems NOT involving absurd amounts of re-doing huge amounts of useless work via brute force.
I -only- seek help when I am unable to isolate & solve problems on my own - as I did here.

Perhaps, for those lacking in experience:

"Sometimes the best solution is just to 'start again' and not know what the problem was, just that it's fixed."

Accepting such brute force measures brings some comfort...but not here.
If/when I need to do testing which resembles what you suggest - I can quickly & easily replace my OS from a saved disk image anytime I desire to - but this set of actions & choices does not help in learning what has broken something in a totally different iteration.

Thanks.

Informationen zum Datenschutz auf dieser Website