C902 Bugs

[kirkie]

I have found the following bugs so far:

The phone memory chart is blank
You lose connection for no reason sometimes
If you send a message it says failed even though it has been sent.

I will keep adding as I find them...

[kirkie]

If you receive a text message whilst on MPE it kicks you out...

[FJ]

Please describe the bugs better

[kirkie]

Please describe the bugs better

If you click on memory status you see lots of pie charts. The top right one says Phone Memory and this is always grey showing nothing.

When the telephone is plugged in via the usb and MPE is running. If you receive a text message it appears that you lose connection.

[FJ]

After both behaviors appeared plesae post the logfile (or send it to me via mail)

[kirkie]

After both behaviors appeared plesae post the logfile (or send it to me via mail)

I will have to wait until I get a text message for the connection and as for the pie chart it is like that as soon as you log in. Do you still need the log file as soon as I log in?

[FJ]

Yes, then send me first the logfile with the pie-chart

[ajwales]

Here you are...

Logdatei MyPhoneExplorer
************************
Programmversion: 1.6.7
nightly vom 00:00:00
Datum: 08/07/2008


09:48:23.82 Setting Port: 44
09:48:23.82 Setting Baud: 921600
09:48:23.82 Avaiable Ports: COM3=Winachsf0; COM44=\Device\s3017mdm0; COM45=\Device\s3017mdm1; COM46=\Device\s3017obex0; COM47=\Device\s3017mgmt0;
09:48:24.04 frmSplash geladen
09:48:24.43 Hauptfenster wird geladen
09:48:24.67 Sidebar fertig geladen
09:48:24.67 Farbschema wurde gelesen
09:48:24.79 UC SMS wird geladen
09:48:24.84 UC Phonebook wird geladen
09:48:24.87 UC Phonebook fertig geladen
09:48:24.88 UC Calls wird geladen
09:48:24.95 UC Organizer wird geladen
09:48:25.09 DoItemUpdate
09:48:25.10 DoItemUpdate fertig
09:48:25.15 Organizer initiated
09:48:25.15 Startpage=1
09:48:25.17 Startpage set
09:48:25.17 UC Filebrowser wird geladen
09:48:25.20 UC Filebrowser: Images werden geladen...
09:48:25.20 UC Filebrowser: Icons Haupttoolbar geladen
09:48:25.21 UC Filebrowser: Icons Detailtoolbar geladen
09:48:25.21 UC Filebrowser: Icons PLaylisttoolbar geladen
09:48:25.21 Lade Ordnericon
09:48:25.21 Lade Laufwerkicon
09:48:25.21 Lade sonstige Icons...
09:48:25.21 Lade Treeviewicons...
09:48:25.21 UC Filebrowser: Icons Listview geladen
09:48:25.21 UC Filebrowser: Sprachdaten werden geladen...
09:48:25.23 Winpreview exists=True
09:48:25.25 UC Filebrowser fertig geladen
09:48:25.26 UC Notes wird geladen
09:48:25.28 UC Calls wird geladen
09:48:25.34 Setting Lastuser: Sony Ericsson C902 [353797022063105]
09:48:25.37 Lade Userdatenbank: Sony Ericsson C902 [353797022063105]
09:48:25.37 GMT Einstellungen geladen
09:48:25.37 InfoSMS geladen
09:48:25.38 Notizeintrag gesetzt
09:48:25.63 Kontakte geladen
09:48:25.68 DoItemUpdate
09:48:25.70 DoItemUpdate fertig
09:48:25.70 Organizer geladen
09:48:25.70 Notizen geladen
09:48:25.70 Load SMS Data...
09:48:25.73 SMS - Datenbank wird geladen...
09:48:25.75 SMS Laden - Readfile: 31 Split: 0 Parse: 16 HandleMultiSMS: 0 Nachrichten: 47
09:48:25.79 RefreshList (Archive): Addrows=0 Sort=0 MenuUpdate=0 Redraw=0
09:48:25.79 SMS Data Loaded...
09:48:25.79 SMS geladen
09:48:25.82 Anrufe geladen
09:48:25.87 Hauptfenster fertig geladen
09:48:28.01 Avaiable Ports: COM3=Winachsf0; COM44=\Device\s3017mdm0; COM45=\Device\s3017mdm1; COM46=\Device\s3017obex0; COM47=\Device\s3017mgmt0;
09:48:28.01 Neue COM-Bibliothek wird verwendet
09:48:28.01 SPort Properties set, opening Port...
09:48:28.01 After OpenPort
09:48:28.01 Settimeout: RT=2000 WT=200
09:48:28.51 Port 44 wurde geöffnet !
09:48:28.54 [TX]: AT+CGSN
09:48:28.56 [RX]: AT+CGSN

09:48:28.56 [RX]: 353797022063105
09:48:28.56 [RX]: OK
09:48:28.57 Settimeout: RT=15000 WT=1000
09:48:28.57 [TX]: ATI
09:48:28.57 [RX]: ATI

09:48:28.57 [RX]: Sony Ericsson C902
09:48:28.57 [RX]: OK
09:48:28.57 [TX]: AT+CSCS="UTF-8"
09:48:28.59 [RX]: AT+CSCS="UTF-8"

09:48:28.59 [RX]: OK
09:48:28.59 [TX]: ATI3
09:48:28.59 [RX]: ATI3

09:48:28.59 [RX]: Sony Ericsson Device 0D4 USB WMC Modem
09:48:28.59 [RX]: OK
09:48:28.59 [TX]: AT+CNMI=2,1,0,1
09:48:28.60 [RX]: AT+CNMI=2,1,0,1

09:48:28.60 [RX]: OK
09:48:28.60 [TX]: AT*ECAM=1
09:48:28.62 [RX]: AT*ECAM=1

09:48:28.62 [RX]: OK
09:48:28.62 [TX]: AT*EVH=?
09:48:28.62 [RX]: AT*EVH=?

09:48:28.62 [RX]: ERROR
09:48:28.63 [TX]: AT+CBC
09:48:28.63 [RX]: AT+CBC

09:48:28.63 [RX]: +CBC: 1, 78
09:48:28.67 [RX]: OK
09:48:28.67 [TX]: AT+CSQ
09:48:28.67 [RX]: AT+CSQ

09:48:28.67 [RX]: +CSQ: 99,99
09:48:28.67 [RX]: OK
09:48:28.67 Alle Verbindungsaktionen beendet
09:48:28.68 Suche Memorystick: C:\ D:\ E:\ F:\
09:48:28.68 Suche abgeschlossen:
09:48:36.45 Settimeout: RT=2000 WT=200
09:48:36.45 [TX]: AT*EBCA=1
09:48:36.54 [RX]: AT*EBCA=1

09:48:36.54 [RX]: *EBCA: 4022,5000,400,219,21,24,0,2,27576,78,391,3,0,3
09:48:36.54 [RX]: OK
09:48:36.54 [TX]: AT*EBCA=0
09:48:36.54 [RX]: AT*EBCA=0

09:48:36.54 [RX]: OK
09:48:36.56 [TX]: AT+CSQ
09:48:36.56 [RX]: AT+CSQ

09:48:36.56 [RX]: +CSQ: 99,99
09:48:36.56 [RX]: OK
09:48:36.56 [TX]: ATI
09:48:36.57 [RX]: ATI

09:48:36.57 [RX]: Sony Ericsson C902
09:48:36.57 [RX]: OK
09:48:36.57 [TX]: AT+CGMR
09:48:36.57 [RX]: AT+CGMR

09:48:36.57 [RX]: R3BH002 080619 1531 12041731_GENERIC_AO
09:48:36.57 [RX]: OK
09:48:36.59 [TX]: AT+CGSN
09:48:36.60 [RX]: AT+CGSN

09:48:36.60 [RX]: 353797022063105
09:48:36.60 [RX]: OK
09:48:36.60 [TX]: AT+CREG=2
09:48:36.62 [RX]: AT+CREG=2

09:48:36.62 [RX]: OK
09:48:36.62 [TX]: AT+CREG?
09:48:36.62 [RX]: AT+CREG?

09:48:36.62 [RX]: +CREG: 2,1,"00CF","0367E275"
09:48:36.62 [RX]: OK
09:48:36.62 [TX]: AT+COPS?
09:48:36.65 [RX]: AT+COPS?

09:48:36.65 [RX]: +COPS: 0,0,"vodafone UK",2
09:48:36.65 [RX]: OK
09:48:41.15 Suche Memorystick: C:\ D:\ E:\ F:\
09:48:41.15 Suche abgeschlossen:
09:48:41.15 Settimeout: RT=15000 WT=1000
09:48:41.15 [TX]: AT*EMEM
09:48:41.28 [RX]: AT*EMEM

09:48:41.28 [RX]: *EMEM: 139886592, 0, 186400768, 0, 0
09:48:41.28 [RX]: OK
09:48:41.28 [TX]: AT+CPROT=0
09:48:41.29 [RX]: AT+CPROT=0

09:48:41.29 [RX]: CONNECT
09:48:41.29 OBEX Connect: 4096 Bytes Paketgröße, Target: IRMC-SYNC
09:48:41.29 [TX]: 80 00 13 10 00 10 00 46 00 0C 49 52 4D 43 2D 53 59 4E 43
09:48:41.43 [RX]: A0 00 18 10 00 30 00 4A 00 0C 49 52 4D 43 2D 53 59 4E 43 CB 00 00 00 04
09:48:41.43 Connection ID:4
09:48:41.43 Paketgröße: 4096, maximal möglich:12288
09:48:41.45 OBEX Get: telecom/pb/info.log
09:48:41.45 [TX]: 83 00 2E 01 00 2B 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 69 00 6E 00 66 00 6F 00 2E 00 6C 00 6F 00 67 00 00
09:48:41.60 [RX]: A0 01 E3 49 01 E0 54 6F 74 61 6C 2D 52 65 63 6F 72 64 73 3A 39 34 0D 0A 4D 61 78 69 6D 75 6D 2D 52 65 63 6F 72 64 73 3A 31 30 30 30 0D 0A 46 72 65 65 2D 52 65 63 6F 72 64 73 3A 39 30 36 0D 0A 44 49 44 3A 34 38 34 38 36 42 45 37 0D 0A 49 45 4C 3A 30 78 30 38 0D 0A 48 44 3A 59 45 53 0D 0A 53 41 54 3A 43 43 0D 0A 4D 43 4C 3A 4E 4F 0D 0A 49 43 4C 3A 4E 4F 0D 0A 4F 43 4C 3A 4E 4F 0D 0A 58 2D 49 52 4D 43 2D 46 49 45 4C 44 53 3A 0D 0A 3C 42 65 67 69 6E 3E 0D 0A 56 45 52 53 49 4F 4E 3A 0D 0A 4E 3B 43 48 41 52 53 45 54 3D 49 53 4F 2D 38 38 35 39 2D 31 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 38 5B 31 3D 31 35 3B 32 3D 31 35 5D 3A 3D 33 30 0D 0A 45 4D 41 49 4C 3B 54 59 50 45 3D 49 4E 54 45 52 4E 45 54 3A 3D 35 30 0D 0A 54 49 54 4C 45 3B 43 48 41 52 53 45 54 3D 49 53 4F 2D 38 38 35 39 2D 31 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 38 3A 3D 31 35 0D 0A 4F 52 47 3B 43 48 41 52 53 45 54 3D 49 53 4F 2D 38 38 35 39 2D 31 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 38 3A 3D 31 35 0D 0A 58 2D 54 45 4C 2D 54 59 50 45 53 3A 36 0D 0A 54 45 4C 3B 54 59 50 45 3D 57 4F 52 4B 3A 3D 34 30 0D 0A 54 45 4C 3B 54 59 50 45 3D 48 4F 4D 45 3A 3D 34 30 0D 0A 54 45 4C 3B 54 59 50 45 3D 43 45 4C 4C 3A 3D 34 30 0D 0A 54 45 4C 3B 54 59 50 45 3D 46 41 58 3A 3D 34 30 0D 0A 54 45 4C 3B 54 59 50 45 3D 50 41 47 45 52 3A 3D 34 30 0D 0A 54 45 4C 3A 3D 34 30 0D 0A 55 52 4C 3A 3D 35 30 0D 0A 58 2D 49 52 4D 43 2D 4C 55 49 44 3A 3D 31 32 0D 0A 52 45 56 3A 0D 0A 3C 45 6E 64 3E 0D 0A
09:48:41.60 ObexGet Fertig, Returncode=A0
09:48:41.67 OBEX Get: telecom/cal/info.log
09:48:41.67 [TX]: 83 00 30 01 00 2D 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 63 00 61 00 6C 00 2F 00 69 00 6E 00 66 00 6F 00 2E 00 6C 00 6F 00 67 00 00
09:48:42.38 [RX]: A0 01 E2 49 01 DF 54 6F 74 61 6C 2D 52 65 63 6F 72 64 73 3A 31 30 0D 0A 4D 61 78 69 6D 75 6D 2D 52 65 63 6F 72 64 73 3A 31 32 35 30 0D 0A 46 72 65 65 2D 52 65 63 6F 72 64 73 3A 31 32 34 30 0D 0A 44 49 44 3A 46 46 46 46 46 46 46 46 0D 0A 49 45 4C 3A 30 78 30 38 0D 0A 48 44 3A 59 45 53 0D 0A 53 41 54 3A 43 43 0D 0A 58 2D 49 52 4D 43 2D 46 49 45 4C 44 53 3A 0D 0A 3C 42 65 67 69 6E 3E 0D 0A 56 45 52 53 49 4F 4E 3A 31 2E 30 0D 0A 53 55 4D 4D 41 52 59 3B 43 48 41 52 53 45 54 3D 49 53 4F 2D 38 38 35 39 2D 31 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 38 3A 3D 32 30 30 0D 0A 4C 4F 43 41 54 49 4F 4E 3B 43 48 41 52 53 45 54 3D 49 53 4F 2D 38 38 35 39 2D 31 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 38 3A 3D 31 30 30 0D 0A 44 45 53 43 52 49 50 54 49 4F 4E 3B 43 48 41 52 53 45 54 3D 49 53 4F 2D 38 38 35 39 2D 31 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 38 3A 3D 32 35 35 0D 0A 52 52 55 4C 45 3B 43 48 41 52 53 45 54 3D 49 53 4F 2D 38 38 35 39 2D 31 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 38 3A 3D 31 30 30 0D 0A 43 41 54 45 47 4F 52 49 45 53 3B 43 48 41 52 53 45 54 3D 49 53 4F 2D 38 38 35 39 2D 31 3A 3D 33 30 0D 0A 44 54 53 54 41 52 54 3A 0D 0A 44 54 45 4E 44 3A 0D 0A 44 55 45 3A 0D 0A 53 54 41 54 55 53 3A 0D 0A 41 41 4C 41 52 4D 3A 0D 0A 43 4C 41 53 53 3A 0D 0A 50 52 49 4F 52 49 54 59 3A 0D 0A 43 4F 4D 50 4C 45 54 45 44 3A 0D 0A 58 2D 49 52 4D 43 2D 4C 55 49 44 3A 3D 31 32 0D 0A 4C 41 53 54 2D 4D 4F 44 49 46 49 45 44 3A 0D 0A 3C 45 6E 64 3E 0D 0A
09:48:42.38 ObexGet Fertig, Returncode=A0
09:48:42.43 OBEX Disconnect
09:48:42.43 [TX]: 81 00 08 CB 00 00 00 04
09:48:42.53 [RX]: A0 00 03
09:48:42.53 Disconnect hat funktioniert
09:48:42.53 Lese noch den OK-String
09:48:42.54 [TX]: AT+CPMS="SM","ME"
09:48:43.93 [RX]: AT+CPMS="SM","ME"

09:48:43.93 [RX]: +CPMS: 0,25,54,46678,54,46678
09:48:43.93 [RX]: OK
09:48:48.68 Settimeout: RT=1500 WT=800
09:48:48.68 [TX]: AT+CBC
09:48:48.71 [RX]: AT+CBC

09:48:48.71 [RX]: +CBC: 1, 78
09:48:48.71 [RX]: OK
09:48:48.71 [TX]: AT+CSQ
09:48:48.73 [RX]: AT+CSQ

09:48:48.73 [RX]: +CSQ: 99,99
09:48:48.73 [RX]: OK
09:48:52.35 [RX]: +CREG: 1,"00CF","0367E275"

[Radio]

I can confirm I have all the same issues. Just checked now and the Phone memory pie-chart is all grey.

[FJ]

09:48:41.28 [RX]: AT*EMEM

09:48:41.28 [RX]: *EMEM: 139886592, 0, 186400768, 0, 0

This is the part for reading the phonememory-status. there are too much zeros in it. Whats the maximum Storage of your phone ?

[ajwales]

THe phone has an internal memory of 160MB.

AJ

[FJ]

Hmm
186400768 = 177MB
139886592 = 133MB

The question is: Are this the complete and free memorydata ?
How does this values change if you delete or upload a file ?

[kirkie]

Another to add to the list is that the battery display sometimes shows blank even though it is charging...

[ajwales]

Hi FJ

The phone has a maximum capacity of 160MB, I have nothing saved on my phone, and my available memory is 133MB, so the firmware must be using up the rest...

AJ

[ajwales]

I just added a 6MB file to the phone memory and the new figures are:

10:52:35.23 [TX]: AT*EMEM
10:52:35.31 [RX]: AT*EMEM

10:52:35.31 [RX]: *EMEM: 133615616, 0, 186400768, 0, 0

AJ

[FJ]

OK, the new data shows 127MB free memory. I will adapt tis to MyPhoneExplorer.

[kirkie]

Just noticed as well that the contacts list doesn't update even after sync....

[FJ]

Please - a littlebit more exactly. how should i fix it when i don't know which contactlist gets not updated and what you did before.

[kirkie]

Please - a littlebit more exactly. how should i fix it when i don't know which contactlist gets not updated and what you did before.

Both. The sim and phone contacts list on my phone isn't the same as in MPE after you do a Multi sync....

[FJ]

SIM-Contacts are not interesting, this is only for older mobiles. New phones have some interface-bugs there.

For the Phone-Contacts please press "Download entire". After this it should also accept changes in a MultiSync