W980

[Augenia]

Hi all,

I am impressed of the new w980 and however it is not available yet, I consider buying it when it is available. I am wondering whether it works with MPE. I've read that some SE-mobiles have a symbian OS. Has the new w980 a symbian OS as well?

Augenia

[FJ]

I take a short lookaround. I don't think that it has Symbian and i can say that it should work with MPE to 99% . You will get 100% when somebody has tested it.

[Augenia]

99% is near to perfection. Thank you

[batuputeh]

i've tried w/ my new w980. everything works except for photo sync. it says cannot find the photo directory on the phone.

[FJ]

Brwose in the filebrowser of MyPhoneExplorer to the photofolder and tell me the path (for phone AND MemoryStick)

[Jeff]

Hello,

I searched in the forum to know if MPE would work with the W980 and I found these posts.

I my case, I can see the directory for the photo on the phone (no memory card). But I can't see any data with "memory status".

Regards

Jeff

[FJ]

This has nothing to do with the previous posts. What do you mean with "nothing" ? Please post a screenshot or describe me your problem better

[Jeff]

This has nothing to do with the previous posts.

Sorry, in my mind, it has, because it concerned the fact MPE works or not with this phone.

What do you mean with "nothing" ? Please post a screenshot or describe me your problem better

The problem is very simple. For the different item (phone memory, contacts (phone / sim), Events and tasks, sms (phone / sim), the different sub items - used, free, total, remain empty... no value... nothing.

Jeff

[FJ]

But you see the pie-cakes and the descriptions ?

Post the logfile after you activated the Memorystatus-Page.

[Jeff]

Hello

Yes I see the pie-chart and the descriptions

The log file is as follow :

Logdatei MyPhoneExplorer
************************
Programmversion: 1.7.1
Datum: 05/02/2009

23:08:20.67 Setting Port: 11
23:08:20.67 Setting Baud: 115200
23:08:20.67 Avaiable Ports: COM1=\Device\Serial0; COM11=\Device\s3117mdm0; COM12=\Device\s3117mdm1; COM13=\Device\s3117obex0; COM14=\Device\s3117mgmt0;
23:08:21.17 Hauptfenster wird geladen
23:08:21.28 Sidebar fertig geladen
23:08:21.28 Farbschema wurde gelesen
23:08:21.32 UC SMS wird geladen
23:08:21.35 UC Phonebook wird geladen
23:08:21.37 UC Phonebook fertig geladen
23:08:21.37 UC Calls wird geladen
23:08:21.43 UC Organizer wird geladen
23:08:21.50 DoItemUpdate
23:08:21.53 DoItemUpdate fertig
23:08:21.54 Organizer initiated
23:08:21.54 Startpage=1
23:08:21.54 Startpage set
23:08:21.54 UC Filebrowser wird geladen
23:08:21.56 UC Filebrowser: Images werden geladen...
23:08:21.56 UC Filebrowser: Icons Haupttoolbar geladen
23:08:21.56 UC Filebrowser: Icons Detailtoolbar geladen
23:08:21.56 UC Filebrowser: Icons PLaylisttoolbar geladen
23:08:21.56 Lade Ordnericon
23:08:21.56 Lade Laufwerkicon
23:08:21.56 Lade sonstige Icons...
23:08:21.56 Lade Treeviewicons...
23:08:21.57 UC Filebrowser: Icons Listview geladen
23:08:21.57 UC Filebrowser: Sprachdaten werden geladen...
23:08:21.57 Winpreview exists=Vrai
23:08:21.59 UC Filebrowser fertig geladen
23:08:21.59 UC Notes wird geladen
23:08:21.60 UC Calls wird geladen
23:08:21.62 Setting Lastuser: Sony Ericsson W980 [355353023048550]
23:08:21.62 Lade Userdatenbank: Sony Ericsson W980 [355353023048550]
23:08:21.62 GMT Einstellungen geladen
23:08:21.62 InfoSMS geladen
23:08:21.67 Kontakte geladen
23:08:21.68 DoItemUpdate
23:08:21.70 DoItemUpdate fertig
23:08:21.70 Organizer geladen
23:08:21.70 Notizen geladen
23:08:21.70 Load SMS Data...
23:08:21.70 SMS - Datenbank wird geladen...
23:08:21.71 SMS Laden - Readfile: 0 Split: 0 Parse: 16 HandleMultiSMS: 0 Nachrichten: 5
23:08:21.71 SMS Archiv laden - Parse: 0
23:08:21.73 RefreshList (Archive): Addrows=0 Sort=0 MenuUpdate=0 Redraw=0
23:08:21.73 SMS Data Loaded...
23:08:21.73 SMS geladen
23:08:21.73 Anrufe geladen
23:08:21.78 Hauptfenster fertig geladen
23:08:23.43 Avaiable Ports: COM1=\Device\Serial0; COM11=\Device\s3117mdm0; COM12=\Device\s3117mdm1; COM13=\Device\s3117obex0; COM14=\Device\s3117mgmt0;
23:08:23.43 Neue COM-Bibliothek wird verwendet
23:08:23.43 SPort Properties set, opening Port...
23:08:23.43 After OpenPort
23:08:23.43 Settimeout: RT=2000 WT=200
23:08:23.93 Port 11 wurde geöffnet !
23:08:23.93 [TX]: AT+CGSN
23:08:24.01 [RX]: AT+CGSN

23:08:24.01 [RX]: 355353023048550
23:08:24.01 [RX]: OK
23:08:24.01 Settimeout: RT=15000 WT=1000
23:08:24.01 [TX]: ATI
23:08:24.03 [RX]: ATI

23:08:24.03 [RX]: Sony Ericsson W980
23:08:24.03 [RX]: OK
23:08:24.03 [TX]: AT+CSCS="UTF-8"
23:08:24.04 [RX]: AT+CSCS="UTF-8"

23:08:24.04 [RX]: OK
23:08:24.04 [TX]: ATI3
23:08:24.06 [RX]: ATI3

23:08:24.06 [RX]: Sony Ericsson Device 0DA USB WMC Modem
23:08:24.06 [RX]: OK
23:08:24.06 [TX]: AT+CNMI=2,1,0,1
23:08:24.10 [RX]: AT+CNMI=2,1,0,1

23:08:24.10 [RX]: OK
23:08:24.10 [TX]: AT*ECAM=1
23:08:24.12 [RX]: AT*ECAM=1

23:08:24.12 [RX]: OK
23:08:24.12 [TX]: AT*EVH=?
23:08:24.13 [RX]: AT*EVH=?

23:08:24.13 [RX]: ERROR
23:08:24.13 [TX]: AT+CBC
23:08:24.15 [RX]: AT+CBC

23:08:24.15 [RX]: +CBC: 1, 99
23:08:24.15 [RX]: OK
23:08:24.15 [TX]: AT+CSQ
23:08:24.17 [RX]: AT+CSQ

23:08:24.17 [RX]: +CSQ: 99,99
23:08:24.17 [RX]: OK
23:08:24.17 Alle Verbindungsaktionen beendet
23:08:24.17 Suche Memorystick: C:\ D:\ E:\ F:\
23:08:24.17 Suche abgeschlossen:
23:08:26.18 Suche Memorystick: C:\ D:\ E:\ F:\
23:08:26.18 Suche abgeschlossen:
23:08:26.18 [TX]: AT*EMEM
23:08:26.28 [RX]: AT*EMEM

23:08:26.28 [RX]: *EMEM: 3655073792, 1, 3733446656, 1, 0
23:08:26.28 [RX]: OK
23:08:34.18 Settimeout: RT=1500 WT=800
23:08:34.18 [TX]: AT+CBC
23:08:34.20 [RX]: AT+CBC

23:08:34.20 [RX]: +CBC: 1, 99
23:08:34.21 [RX]: OK
23:08:34.21 [TX]: AT+CSQ
23:08:34.23 [RX]: AT+CSQ

23:08:34.23 [RX]: +CSQ: 99,99
23:08:34.23 [RX]: OK
23:08:44.23 [TX]: AT+CBC
23:08:44.26 [RX]: AT+CBC

23:08:44.26 [RX]: +CBC: 1, 99
23:08:44.26 [RX]: OK
23:08:44.26 [TX]: AT+CSQ
23:08:44.28 [RX]: AT+CSQ

23:08:44.28 [RX]: +CSQ: 99,99
23:08:44.28 [RX]: OK
23:08:45.51 Terminate Subclass
23:08:45.51 Terminate ADO
23:08:45.51 Unload Iconlib
23:08:45.51 Terminate Tray
23:08:45.53 Killing temporary Files
23:08:45.53 Terminate: Calls
23:08:45.53 Terminate: PB
23:08:45.53 Terminate: Notes
23:08:45.53 Terminate: Organizer
23:08:45.54 Terminate: SMS
23:08:45.54 ClosePort
23:08:45.54 Port 11 wird geschlossen
23:08:45.68 Port wurde geschlossen
23:08:45.68 Form_QueryUnload -> Ende
23:08:45.68 Unload: frmSplash
23:08:45.68 Form_Unload -> Ende

When I click to have the memory status, there is just written on the bottom "refreshing memory status.... " and nothing happen, even if I wait a few minutes

TIA

Jeff

[FJ]

Thank you for the log. There is a bug in MPE which will be fixed in the next update (the big phone-memory raised an overflow in MPE)

[Jeff]

Thank you very much for the quick answer

I guessed it could be something around the large memory. 8 Gb is a lot !

Jeff

[A(3]

Hi!
I have some problems with W980 also...
- same error with "memory status" (but i see it will be fixed)
all the other problems is in backup section:
- can't check backup the "profiles"...
- don't know why but even after the MPE 171 saved all the files from the W980 the restore backup restored only the SMSs and contacts (even didn't restored themes)... and all the files i restore manually...
- don't know if it's error or not but contacts being restored without "voice command"... and i had about ~100 of them...

[FJ]

2) Since the K750 its no more possible to access profiles
3) Diffrent phones can have diffrent folderstructures, besides this a diffrent phone can maybe have not enought memory. Cause of this two reasons its better to restore files manually. Which is basicly no problem cause MPE supports full Drag&Drop - also for complete folders
4) The phone has no interface to access the "Voice record", also not to the assigned ringtone so its not possible to save/restore this

[A(3]

3) it was the same phone, i just toke it to fix so everything in side was deleted...
and i have ~4gb/~200folders and it's a bit problem to add all this manually back because every video/audio/others/photos need to moved separately to different folder and wait couple hours...
and it would be much easier if it be can be done with 1 click of restore of backup...
4) is there any way to to save contact's "voice command"? (even if it's not with MPE)

is it possible to add applications & games in backup?

10Q for quick answering!

[FJ]

3) YOU had the same model, but not all users restore the backup on a same model. Why every folder ? Open the Filebrowser in MPE so that you see "PhoneMemory" and "MemoryStick" in the list. Then take the "PhoneMemory" from your PC and Drag it to the white space of the List. Neve´r heard of Drag&Drop ? Its one single action.

4) If there would be a possibility then you would found it in MPE. AFAIK there is no software which can read/write this information.

5) Games and Apps are read-protected, no way

[A(3]

sorry so many questions... this is the last one just found out when played the music that all the files that wasn't with english names (was with russian/ukraine/hebrew/italian letters) converted to very long numbered names...
i don't know if it was because MPE or because windows don't set defaulted to this language unicode...

[FJ]

Its a common issue cause MPE is not fully unicode compatible. if you have f.e. russian files and you have set the russian system-charset then it will display also russian chars.

[A(3]

Thanks!

[A(3]

still small error...

and my memory is: 6638MB free (in the phone's status)