USB connection non detected

[renautm]

I have a Galaxy Note 2
I can explore it via an Usb connection and the classical W7 explorer
But from "Myphone Ecxplorer" I have a message "USB connection non detected"
Can You Help ?

Thank You
Michel

[user_deleted]

Did you read the How To...?
Specially:
- Turn on USB-Debugging,
- Install the ADB-/USB-drivers
- Install the MPE Client (on your Android device)

best regards...

[Papipio]

Bonjour,

I have a Samsung Galaxy SIII phone, and I would like to connect it to my desktop PC (Windows XP) or to my netbook (Windows 7) through USB.
I did everything I found in this forum and in many other forums, I updated all softwares involved (Kies, drivers, ...): no result ! Through Kies I fixed USB connexion : no result !
Is there ONE solution to this problem ?
It seems that many (if not all) people have the same problem ...

Hopefully, everything is OK through WiFi with MyPhoneExplorer.
But I would like to simply connect USB (without having to start WiFi) and at the same time charge the battery.

Merci.

Pierre

[user_deleted]

Did you try to use another USB port (NOT a port on an USB hub)?

best regards...

[renautm]

Yes I tried others USB port.
I have cancelled the driver and have re installed an updated driver
But it still doesn't work

[Papipio]

Bonjour,

I always connect my SIII phone to an USB connector of the front face of my desktop PC tower, it is directly connected to an USB connector of the motherboard.
When my phone is connected, the USB connection is randomly available: it works from time to time, then it is closed for appearing available a few seconds later. When OK, the unit GT-I9300 appears in the Windows explorer.
I tried to use PTP connection (camera) and MTP connection (multimedia) in the SIII phone, the problem is the same.
When OK, I can transfer files from SIII to PC or from PC to SIII.
In the phone, MyPhoneExplorer client always detects the USB cable connection.

With Kies in the PC I can't do anything: it is impossible to get an USB connection or a WiFi connection.
With Kies Air in the phone and the browser in the PC (Firefox) it is OK, except that the transfer of photos and videos is difficult and heavy (files are not sorted .…).

[FJ]

@Papipio: As Mr. Deaville said: Use another USB-Port

@renautm: Please post the logfile after the error message appeared.

[Papipio]

Bonjour,

I tried a connection to an USB port at the rear face of my desktop PC tower, I tried a connection to the USB port available from the flash card reader: always the same problem.
I tried a connection to 2 different USB ports of my Windows 7 netbook: always the same problem, the result is random.
My SIII is the only one of the many devices I use which I can't connect to an USB port ...

Happy new year for everyone .

Pierre

[francois2]

I think that the issue comes from the fact that USB Mass Storage protocol is not available any more ! (on Note II and S3)

Everybody complains about it on various fora...

Are you at FJ Software preparing a turnaround ?

[user_deleted]

I think it could not be the only problem here.
On my Galaxy Nexus, there's also no Mass Storage Protocol, but it's no
problem to connect to MPE via USB in MTP mode (PTP mode is not working).

best regards...

[francois2]

Logdatei MyPhoneExplorer
************************
Programmversion: 1.8.4
Datum: 04/01/2013

10:47:54.54 Setting Port: 999
10:47:54.54 Setting Baud: 115200
10:47:54.54 Avaiable Ports: COM0=;
10:47:54.55 Main Load frmSplash
10:47:54.63 Load frmSplash...
10:47:55.40 Hauptfenster wird geladen
10:47:56.21 Sidebar fertig geladen
10:47:56.46 UC SMS wird geladen
10:47:56.54 UC Phonebook wird geladen
10:47:56.57 UC Phonebook fertig geladen
10:47:56.58 UC Calls wird geladen
10:47:56.60 UC Organizer wird geladen
10:47:56.71 Organizer initiated
10:47:56.72 Startpage=1
10:47:56.72 UC Filebrowser wird geladen
10:47:56.86 UC Filebrowser fertig geladen
10:47:56.86 UC AppBrowser wird geladen
10:47:56.93 UC Notes wird geladen
10:47:56.94 UC Calls wird geladen
10:47:56.99 Setting Lastuser: samsung GT-N7100 [354666057911943]
10:47:57.02 Lade Userdatenbank: samsung GT-N7100 [354666057911943]
10:47:57.10 LoadDatafile: pb_metadata.xml(4492 Bytes)
10:47:57.18 LoadDatafile: Phonebook.dat(359840 Bytes)
10:47:57.61 Kontakte geladen
10:47:57.63 LoadDatafile: Calls.dat(31 Bytes)
10:47:57.66 Anrufe geladen
10:47:57.66 Organizer LoadUser DefaultTimeColWidth=101
10:47:57.70 LoadDatafile: Organizer.dat(345065 Bytes)
10:47:58.03 LoadDatafile: cal_metadata.xml(1191 Bytes)
10:47:58.16 Organizer geladen
10:47:58.20 LoadDatafile: Notes.dat(36305 Bytes)
10:47:58.25 Notizen geladen
10:47:58.25 Load SMS Data...
10:47:58.27 LoadDatafile: SMS.dat(249854 Bytes)
10:47:58.27 SMS - Datenbank wird geladen...
10:47:58.47 SMS Laden - Readfile: 16 Split: 0 Parse: 202 HandleMultiSMS: 0 Nachrichten: 2196
10:47:58.47 LoadDatafile: SMSArchive.dat(867 Bytes)
10:47:58.47 SMS Archiv laden - Parse: 0
10:47:58.73 RefreshList (Archive): Addrows=0 Sort=0 MenuUpdate=0 Redraw=0
10:47:58.98 SMS Data Loaded...
10:47:58.98 SMS geladen
10:47:59.11 Hauptfenster fertig geladen
10:47:59.23 Init Android Connection for future connect via WiFi
10:47:59.23 Broadcaster started
10:47:59.36 Downloader: RC=6 BytesMax=5 URL=http://www.fjsoft.at/myphoneexplorer/version.txt
10:48:01.47 Refresh ComDescriptions...
10:48:01.79 StickyNotesPath=C:\Windows\system32\StikyNot.exe FileExists=Vrai
10:48:01.81 StickyNotesTitle=Pense-bête
10:48:08.77 OK pressed in settingswindow
10:48:08.86 Set first swap of settings
10:48:08.87 Apply new holidays
10:48:08.87 Holidays applied
10:48:08.89 Second swap of settings set
10:48:08.91 Everything is done
10:48:11.32 Closing Broadcaster
10:48:11.32 RunADBCommand: start-server
10:48:15.88 ADB CommandResponse: * daemon not running. starting it now on port 5037 *
* daemon started successfully *
10:48:15.88 RunADBCommand: devices
10:48:15.99 ADB CommandResponse: List of devices attached
10:48:15.99 Run DeviceTracker
10:48:16.02 Init Tracker
10:48:16.05 Device Tracker Message: OKAY0000
10:48:16.05 Connect to Android failed!
10:48:16.05 bOpened=Faux
10:48:16.05 Pas de périphérique USB détecté
10:48:16.05 Refresh ComDescriptions...
10:48:16.05 ErrMsg: La connexion avec le téléphone n'a pas pu être établie.:

[francois2]

Was finally solved by reinstalling drivers (through Kies)

[TechHobo]

Similar problem. Phone (LG P999) USB not detected when I try to connect. This connection has been working fine for a year. If I unplug the phone with MPE running and replug it I get a popup in the systray that MPE detected a USB phone. Then when I try to connect in the program it says no USB device detected. If I enable USB storage I can use the drives on the phone no problem. WiFi connection works fine. Tried several ports & different cables. THIS WAS WORKING FINE! So now do I uninstall MPE from the windows computer and reinstall, or do I uninstall the client on the phone side and reinstall, or both, or neither???

[FJ]

Its always the same for the USB-Connection:
- check if "USB-Debugging" is enabled on the phone
- ensure that the ADB-Drivers are installed correctly (take a look at the device manager)

[TheLandYacht]

Recently purchased Galaxy S3. Get the above error when I try to add a user for this new phone.

Old phone works fine using same plug/cable/etc, connects to MPE just fine.

Instructions indicate:
1. USB Debugging on: It is
2. USB Charging Mode only: Can't find this setting anywhere, I think I've been all the way through all the settings. Each time I connect the USB cable I see "Connected as Media Device" on the phone.
3. ADB drivers: Installed on the computer & working (otherwise the old phone wouldn't work either).

Drag down from the notification bar gives the option for
1. Media Device (MTP)
2. Camera (PTP)
Doesn't seem to be an option for charge only anywhere there either.

Ummm...Help?!

[TheLandYacht]

Finally got it to recognize. Here's what I did.

Even when I would run ADB DEVICES, I'd get no connected devices.
My phone was showing up in Device Manager, and per instructions I found here
http://stackoverflow.com/questions/6469 ... d-my-phone,
I uninstalled the driver from device manager, reinstalled the driver for my phone...and NOW it connects...and shows up in ADB DEVICES



Here's hoping this helps others as well.