FJ Software

Supportforum for MyPhoneExplorer
http://www.fjsoft.at/forum/

W980

http://www.fjsoft.at/forum/viewtopic.php?t=5326

Seite 2 von 3

Verfasst: So 22. Feb 2009, 17:58
von FJ
OK, then is the output of the phone wrong. MPE just can display the informations which the phones give and i think that the phone just sends some stuff which is not true. Post the logfile after this view and then i can show it to you

Verfasst: Mo 23. Feb 2009, 10:52
von A(3
where is the log?

Verfasst: Mo 23. Feb 2009, 11:45
von Leif
A(3 hat geschrieben:where is the log?

File | Options | Connection: Write log file + Show log file

Verfasst: Mo 23. Feb 2009, 12:12
von A(3
Logdatei MyPhoneExplorer
************************
Programmversion: 1.7.2
Datum: 23/02/2009

13:09:31.50 Setting Port: 11
13:09:31.50 Setting Baud: 921600
13:09:31.50 Avaiable Ports: COM1=\Device\Serial0; COM3=Winachsf0; COM11=\Device\s0017mdm0; COM12=\Device\s0017mdm1; COM13=\Device\s0017obex0; COM14=\Device\s0017mgmt0;
13:09:32.04 frmSplash geladen
13:09:32.25 Hauptfenster wird geladen
13:09:32.35 Sidebar fertig geladen
13:09:32.35 Farbschema wurde gelesen
13:09:32.40 UC SMS wird geladen
13:09:32.43 UC Phonebook wird geladen
13:09:32.46 UC Phonebook fertig geladen
13:09:32.46 UC Calls wird geladen
13:09:32.53 UC Organizer wird geladen
13:09:32.57 DoItemUpdate
13:09:32.59 DoItemUpdate fertig
13:09:32.60 DoItemUpdate
13:09:32.60 DoItemUpdate fertig
13:09:32.63 Organizer initiated
13:09:32.63 Startpage=1
13:09:32.63 Startpage set
13:09:32.63 UC Filebrowser wird geladen
13:09:32.63 UC Filebrowser: Images werden geladen...
13:09:32.65 UC Filebrowser: Icons Haupttoolbar geladen
13:09:32.65 UC Filebrowser: Icons Detailtoolbar geladen
13:09:32.65 UC Filebrowser: Icons PLaylisttoolbar geladen
13:09:32.65 Lade Ordnericon
13:09:32.65 Lade Laufwerkicon
13:09:32.65 Lade sonstige Icons...
13:09:32.65 Lade Treeviewicons...
13:09:32.65 UC Filebrowser: Icons Listview geladen
13:09:32.65 UC Filebrowser: Sprachdaten werden geladen...
13:09:32.67 Winpreview exists=True
13:09:32.68 UC Filebrowser fertig geladen
13:09:32.68 UC Notes wird geladen
13:09:32.68 UC Calls wird geladen
13:09:32.71 Setting Lastuser: Sony Ericsson W980 [IMEI]
13:09:32.71 Lade Userdatenbank: Sony Ericsson W980 [IMEI]
13:09:32.71 GMT Einstellungen geladen
13:09:32.71 InfoSMS geladen
13:09:32.81 Kontakte geladen
13:09:32.82 DoItemUpdate
13:09:32.84 DoItemUpdate fertig
13:09:32.85 Organizer geladen
13:09:32.85 Notizen geladen
13:09:32.85 Load SMS Data...
13:09:32.85 SMS - Datenbank wird geladen...
13:09:32.85 SMS Laden - Readfile: 0 Split: 0 Parse: 0 HandleMultiSMS: 0 Nachrichten: 3
13:09:32.87 RefreshList (Archive): Addrows=0 Sort=0 MenuUpdate=0 Redraw=0
13:09:32.87 SMS Data Loaded...
13:09:32.87 SMS geladen
13:09:32.90 Anrufe geladen
13:09:32.93 Hauptfenster fertig geladen

Verfasst: Mo 23. Feb 2009, 13:00
von FJ
Post the logfile after this view and then i can show it to you

Verfasst: Mo 23. Feb 2009, 13:12
von A(3
Logdatei MyPhoneExplorer
************************
Programmversion: 1.7.2
Datum: 23/02/2009

14:07:24.35 Setting Port: 11
14:07:24.35 Setting Baud: 921600
14:07:24.35 Avaiable Ports: COM1=\Device\Serial0; COM3=Winachsf0; COM11=\Device\s0017mdm0; COM12=\Device\s0017mdm1; COM13=\Device\s0017obex0; COM14=\Device\s0017mgmt0;
14:07:25.00 frmSplash geladen
14:07:25.18 Hauptfenster wird geladen
14:07:25.29 Sidebar fertig geladen
14:07:25.29 Farbschema wurde gelesen
14:07:25.34 UC SMS wird geladen
14:07:25.37 UC Phonebook wird geladen
14:07:25.38 UC Phonebook fertig geladen
14:07:25.38 UC Calls wird geladen
14:07:25.45 UC Organizer wird geladen
14:07:25.48 DoItemUpdate
14:07:25.50 DoItemUpdate fertig
14:07:25.51 DoItemUpdate
14:07:25.53 DoItemUpdate fertig
14:07:25.54 Organizer initiated
14:07:25.54 Startpage=1
14:07:25.56 Startpage set
14:07:25.56 UC Filebrowser wird geladen
14:07:25.56 UC Filebrowser: Images werden geladen...
14:07:25.56 UC Filebrowser: Icons Haupttoolbar geladen
14:07:25.57 UC Filebrowser: Icons Detailtoolbar geladen
14:07:25.57 UC Filebrowser: Icons PLaylisttoolbar geladen
14:07:25.57 Lade Ordnericon
14:07:25.57 Lade Laufwerkicon
14:07:25.57 Lade sonstige Icons...
14:07:25.57 Lade Treeviewicons...
14:07:25.57 UC Filebrowser: Icons Listview geladen
14:07:25.57 UC Filebrowser: Sprachdaten werden geladen...
14:07:25.57 Winpreview exists=True
14:07:25.59 UC Filebrowser fertig geladen
14:07:25.59 UC Notes wird geladen
14:07:25.60 UC Calls wird geladen
14:07:25.63 Setting Lastuser: Sony Ericsson W980 [IMEI]
14:07:25.63 Lade Userdatenbank: Sony Ericsson W980 [IMEI]
14:07:25.63 GMT Einstellungen geladen
14:07:25.63 InfoSMS geladen
14:07:25.71 Kontakte geladen
14:07:25.73 DoItemUpdate
14:07:25.76 DoItemUpdate fertig
14:07:25.78 Organizer geladen
14:07:25.78 Notizen geladen
14:07:25.78 Load SMS Data...
14:07:25.78 SMS - Datenbank wird geladen...
14:07:25.78 SMS Laden - Readfile: 0 Split: 0 Parse: 0 HandleMultiSMS: 0 Nachrichten: 3
14:07:25.81 RefreshList (Archive): Addrows=0 Sort=0 MenuUpdate=0 Redraw=0
14:07:25.81 SMS Data Loaded...
14:07:25.81 SMS geladen
14:07:25.85 Anrufe geladen
14:07:25.88 Hauptfenster fertig geladen
14:07:28.88 Suche Memorystick: C:\ D:\
14:07:28.88 Suche abgeschlossen:
14:07:28.90 Avaiable Ports: COM1=\Device\Serial0; COM3=Winachsf0; COM11=\Device\s0017mdm0; COM12=\Device\s0017mdm1; COM13=\Device\s0017obex0; COM14=\Device\s0017mgmt0;
14:07:28.90 Neue COM-Bibliothek wird verwendet
14:07:28.90 SPort Properties set, opening Port...
14:07:28.90 After OpenPort
14:07:28.90 Settimeout: RT=2000 WT=200
14:07:29.40 Port 11 wurde ge?ffnet !
14:07:29.40 [TX]: AT+CGSN
14:07:29.43 [RX]: AT+CGSN

14:07:29.43 [RX]: IMEI
14:07:29.43 [RX]: OK
14:07:29.43 Settimeout: RT=15000 WT=1000
14:07:29.43 [TX]: ATI
14:07:29.43 [RX]: ATI

14:07:29.43 [RX]: Sony Ericsson W980
14:07:29.43 [RX]: OK
14:07:29.45 [TX]: AT+CSCS="UTF-8"
14:07:29.45 [RX]: AT+CSCS="UTF-8"

14:07:29.45 [RX]: OK
14:07:29.45 [TX]: ATI3
14:07:29.45 [RX]: ATI3

14:07:29.45 [RX]: Sony Ericsson Device 0DA USB WMC Modem
14:07:29.45 [RX]: OK
14:07:29.46 [TX]: AT+CNMI=2,1,0,1
14:07:29.50 [RX]: AT+CNMI=2,1,0,1

14:07:29.50 [RX]: OK
14:07:29.50 [TX]: AT*ECAM=1
14:07:29.51 [RX]: AT*ECAM=1

14:07:29.51 [RX]: OK
14:07:29.51 [TX]: AT+CBC
14:07:29.51 [RX]: AT+CBC

14:07:29.51 [RX]: +CBC: 1, 100
14:07:29.51 [RX]: OK
14:07:29.53 [TX]: AT+CSQ
14:07:29.53 [RX]: AT+CSQ

14:07:29.53 [RX]: +CSQ: 99,99
14:07:29.53 [RX]: OK
14:07:29.53 Alle Verbindungsaktionen beendet
14:07:29.53 Suche Memorystick: C:\ D:\
14:07:29.53 Suche abgeschlossen:
14:07:29.54 [TX]: AT*EMEM
14:07:29.68 [RX]: AT*EMEM

14:07:29.68 [RX]: *EMEM: 2665611264, 1, 3733446656, 1, 9775459
14:07:29.70 [RX]: OK
14:07:29.70 [TX]: AT+CPROT=0
14:07:29.73 [RX]: AT+CPROT=0

14:07:29.73 [RX]: CONNECT
14:07:29.73 OBEX Connect: 4096 Bytes Paketgr??e, Target: IRMC-SYNC
14:07:29.73 [TX]: 80 00 13 10 00 10 00 46 00 0C 49 52 4D 43 2D 53 59 4E 43
14:07:29.73 [RX]: A0 00 18 10 00 30 00 4A 00 0C 49 52 4D 43 2D 53 59 4E 43 CB 00 00 00 0A
14:07:29.73 Connection ID:10
14:07:29.73 Paketgr??e: 4096, maximal m?glich:12288
14:07:29.73 OBEX Get: telecom/pb/info.log
14:07:29.75 [TX]: 83 00 2E 01 00 2B 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 69 00 6E 00 66 00 6F 00 2E 00 6C 00 6F 00 67 00 00
14:07:29.85 [RX]: A0 01 E4 49 01 E1 54 6F 74 61 6C 2D 52 65 63 6F 72 64 73 3A 31 32 33 0D 0A 4D 61 78 69 6D 75 6D 2D 52 65 63 6F 72 64 73 3A 31 30 30 30 0D 0A 46 72 65 65 2D 52 65 63 6F 72 64 73 3A 38 37 37 0D 0A 44 49 44 3A 34 39 39 41 39 42 38 31 0D 0A 49 45 4C 3A 30 78 30 38 0D 0A 48 44 3A 59 45 53 0D 0A 53 41 54 3A 43 43 0D 0A 4D 43 4C 3A 4E 4F 0D 0A 49 43 4C 3A 4E 4F 0D 0A 4F 43 4C 3A 4E 4F 0D 0A 58 2D 49 52 4D 43 2D 46 49 45 4C 44 53 3A 0D 0A 3C 42 65 67 69 6E 3E 0D 0A 56 45 52 53 49 4F 4E 3A 0D 0A 4E 3B 43 48 41 52 53 45 54 3D 49 53 4F 2D 38 38 35 39 2D 31 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 38 5B 31 3D 31 35 3B 32 3D 31 35 5D 3A 3D 33 30 0D 0A 45 4D 41 49 4C 3B 54 59 50 45 3D 49 4E 54 45 52 4E 45 54 3A 3D 35 30 0D 0A 54 49 54 4C 45 3B 43 48 41 52 53 45 54 3D 49 53 4F 2D 38 38 35 39 2D 31 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 38 3A 3D 31 35 0D 0A 4F 52 47 3B 43 48 41 52 53 45 54 3D 49 53 4F 2D 38 38 35 39 2D 31 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 38 3A 3D 31 35 0D 0A 58 2D 54 45 4C 2D 54 59 50 45 53 3A 36 0D 0A 54 45 4C 3B 54 59 50 45 3D 57 4F 52 4B 3A 3D 34 30 0D 0A 54 45 4C 3B 54 59 50 45 3D 48 4F 4D 45 3A 3D 34 30 0D 0A 54 45 4C 3B 54 59 50 45 3D 43 45 4C 4C 3A 3D 34 30 0D 0A 54 45 4C 3B 54 59 50 45 3D 46 41 58 3A 3D 34 30 0D 0A 54 45 4C 3B 54 59 50 45 3D 50 41 47 45 52 3A 3D 34 30 0D 0A 54 45 4C 3A 3D 34 30 0D 0A 55 52 4C 3A 3D 35 30 0D 0A 58 2D 49 52 4D 43 2D 4C 55 49 44 3A 3D 31 32 0D 0A 52 45 56 3A 0D 0A 3C 45 6E 64 3E 0D 0A
14:07:29.85 ObexGet Fertig, Returncode=A0
14:07:29.90 OBEX Get: telecom/cal/info.log
14:07:29.90 [TX]: 83 00 30 01 00 2D 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 63 00 61 00 6C 00 2F 00 69 00 6E 00 66 00 6F 00 2E 00 6C 00 6F 00 67 00 00
14:07:29.93 [RX]: A0 01 E2 49 01 DF 54 6F 74 61 6C 2D 52 65 63 6F 72 64 73 3A 31 37 0D 0A 4D 61 78 69 6D 75 6D 2D 52 65 63 6F 72 64 73 3A 31 32 35 30 0D 0A 46 72 65 65 2D 52 65 63 6F 72 64 73 3A 31 32 33 33 0D 0A 44 49 44 3A 34 39 39 41 39 42 41 38 0D 0A 49 45 4C 3A 30 78 30 38 0D 0A 48 44 3A 59 45 53 0D 0A 53 41 54 3A 43 43 0D 0A 58 2D 49 52 4D 43 2D 46 49 45 4C 44 53 3A 0D 0A 3C 42 65 67 69 6E 3E 0D 0A 56 45 52 53 49 4F 4E 3A 31 2E 30 0D 0A 53 55 4D 4D 41 52 59 3B 43 48 41 52 53 45 54 3D 49 53 4F 2D 38 38 35 39 2D 31 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 38 3A 3D 32 30 30 0D 0A 4C 4F 43 41 54 49 4F 4E 3B 43 48 41 52 53 45 54 3D 49 53 4F 2D 38 38 35 39 2D 31 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 38 3A 3D 31 30 30 0D 0A 44 45 53 43 52 49 50 54 49 4F 4E 3B 43 48 41 52 53 45 54 3D 49 53 4F 2D 38 38 35 39 2D 31 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 38 3A 3D 32 35 35 0D 0A 52 52 55 4C 45 3B 43 48 41 52 53 45 54 3D 49 53 4F 2D 38 38 35 39 2D 31 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 38 3A 3D 31 30 30 0D 0A 43 41 54 45 47 4F 52 49 45 53 3B 43 48 41 52 53 45 54 3D 49 53 4F 2D 38 38 35 39 2D 31 3A 3D 33 30 0D 0A 44 54 53 54 41 52 54 3A 0D 0A 44 54 45 4E 44 3A 0D 0A 44 55 45 3A 0D 0A 53 54 41 54 55 53 3A 0D 0A 41 41 4C 41 52 4D 3A 0D 0A 43 4C 41 53 53 3A 0D 0A 50 52 49 4F 52 49 54 59 3A 0D 0A 43 4F 4D 50 4C 45 54 45 44 3A 0D 0A 58 2D 49 52 4D 43 2D 4C 55 49 44 3A 3D 31 32 0D 0A 4C 41 53 54 2D 4D 4F 44 49 46 49 45 44 3A 0D 0A 3C 45 6E 64 3E 0D 0A
14:07:29.93 ObexGet Fertig, Returncode=A0
14:07:29.98 OBEX Disconnect
14:07:29.98 [TX]: 81 00 08 CB 00 00 00 0A
14:07:30.06 [RX]: A0 00 03
14:07:30.06 Disconnect hat funktioniert
14:07:30.06 Lese noch den OK-String
14:07:30.12 [TX]: AT+CPMS="SM","ME"
14:07:30.13 [RX]: AT+CPMS="SM","ME"

14:07:30.13 [RX]: +CPMS: 0,20,2,2320194,2,2320194
14:07:30.13 [RX]: OK
i clicked everything... contacts, sms, memories, files, calls, organizer...

Verfasst: Mo 23. Feb 2009, 17:24
von FJ
14:07:29.68 [RX]: *EMEM: 2665611264, 1, 3733446656, 1, 9775459

as i thought - a bug in the phone. There are no value near 6GB. but i think its a minor issue and you can life with it.

Verfasst: Mo 23. Feb 2009, 17:50
von A(3
sure, no problem...
i just thought it's fixable...
10x for making it usable with w980!

W980

Verfasst: Di 24. Feb 2009, 17:37
von Neville Bartos
Hi All,
I've changed phones from a W890i to a W980. I haven't got the SonyEriccson CD for the W980 and MPE will not see it thru USB when I select 'phone mode'. I can however transfer to the comp in 'Media Transfer'.
Any ideas
Cheers
Nev

W980

Verfasst: Di 24. Feb 2009, 17:56
von Neville Bartos
Sorry Gents,
I've just read the English FAQ and I need the driver.
Nev

Verfasst: Di 24. Feb 2009, 22:54
von A(3
here all the drivers from the "Sony Ericsson PC Suit v4.010.00"

Code: Alles auswählen

http://www.megaupload.com/?d=H04NIFWO
hope it'll help...

Verfasst: Di 24. Feb 2009, 22:57
von A(3
i think for w980, it's all the s0017***

W980

Verfasst: Do 26. Feb 2009, 13:20
von Neville Bartos
Many thanks for the link. I've loaded all drivers from that site and now it's asking me for a modem install?
When ever I try to connect my W980 I get a dialouge box with 'Set connection string failed'
Am I confusing the issue because I'm using the SIM from W890i in the W980?
Cheers
Nev

Verfasst: Do 26. Feb 2009, 17:55
von FJ
Use this drivers. i don't know from where the others come and if they are correct.

Working!!

Verfasst: Do 12. Mär 2009, 11:21
von Neville Bartos
This worked a treat! I'm telling everyone in the cricket club here in Sweden to get onboard MPE.
Cheers
Nev

question

Verfasst: Do 4. Jun 2009, 15:54
von Guest
batuputeh hat geschrieben:i've tried w/ my new w980. everything works except for photo sync. it says cannot find the photo directory on the phone.


As I follow this thread, I assume that this problem is solved in the next update. Is this in version 1.7.3? Because on 1.7.2 MPE cannot find photo's on the w980. As far as I know a memory card cannot be used on this mobile.

Best regards

Verfasst: Do 4. Jun 2009, 16:57
von FJ
The release of v1.7.2 was after this post so it should work now.
Anyway: Tell me the path to the photos on the W980

Verfasst: Do 4. Jun 2009, 17:40
von Augenia
FJ hat geschrieben:The release of v1.7.2 was after this post so it should work now.
Anyway: Tell me the path to the photos on the W980


MPE says this is the path to photo's in my mobile

\Camera-album\100MSDCF\

Verfasst: Do 4. Jun 2009, 23:48
von FJ
Please try it again with the current beta and tell me if its working.

Verfasst: Fr 5. Jun 2009, 11:43
von Gast
FJ hat geschrieben:Please try it again with the current beta and tell me if its working.


Thank you for your reply. Let you know asap but not before tomorrow.

gr
Augenia
Alle Zeiten sind UTC+01:00
Seite 2 von 3

Powered by phpBB® Forum Software © phpBB Limited

Deutsche Übersetzung durch phpBB.de