FJ Software

I too am a huge fan of MFP and an owner of a satio. the unsure if this information is relèvent to the problem but within the satio you can create custom sync profiles, would this help its interaction with MFP

Thanks for this information i'll inform my current testers about this.

No problem its the least i could do i love my phone explorer! : D

Hi,

I'm VERY happy to help out with testing if you need another tester. I had to go back to the SE software when I upgraded to a Satio.... I REALLY do miss MPE!

Contact me http://www.beyondyournose.com/contact if you want extra help in testing.

Bergen

I tried your debugversion. While synchronising Contact I got this error:

Obex Protocol kon niet worden geïnitialiseerd
OBEX Errorcode: 01 - Unhandled Error.

This is the logfile:

Logdatei MyPhoneExplorer
************************
Programmversion: 1.7.4
nightly vom 3-12-2009 14:53:21
Datum: 3-12-2009

21:55:39.31 Setting Port: 18
21:55:39.31 Setting Baud: 921600
21:55:39.32 Avaiable Ports: COM1=\Device\Serial0; COM17=\Device\USBSER000; COM18=\Device\USBSER001; COM19=\Device\USBSER002; COM20=\Device\USBSER003;
21:55:39.32 Main Load frmSplash
21:55:39.70 Load frmSplash...
21:55:39.71 Show splash...
21:55:39.71 frmSplash geladen
21:55:40.04 Hauptfenster wird geladen
21:55:40.18 Sidebar fertig geladen
21:55:40.18 Farbschema wurde gelesen
21:55:40.26 UC SMS wird geladen
21:55:40.34 UC Phonebook wird geladen
21:55:40.37 UC Phonebook fertig geladen
21:55:40.37 UC Calls wird geladen
21:55:40.38 UC Organizer wird geladen
21:55:40.48 Organizer initiated
21:55:40.48 Startpage=1
21:55:40.50 Startpage set
21:55:40.50 UC Filebrowser wird geladen
21:55:40.51 UC Filebrowser: Images werden geladen...
21:55:40.51 UC Filebrowser: Icons Haupttoolbar geladen
21:55:40.53 UC Filebrowser: Icons Detailtoolbar geladen
21:55:40.53 UC Filebrowser: Icons PLaylisttoolbar geladen
21:55:40.53 Lade Ordnericon
21:55:40.53 Lade Laufwerkicon
21:55:40.53 Lade sonstige Icons...
21:55:40.53 Lade Treeviewicons...
21:55:40.53 UC Filebrowser: Icons Listview geladen
21:55:40.53 UC Filebrowser: Sprachdaten werden geladen...
21:55:40.54 Winpreview exists=True
21:55:40.56 UC Filebrowser fertig geladen
21:55:40.56 UC AppBrowser wird geladen
21:55:40.57 UC Notes wird geladen
21:55:40.57 UC Calls wird geladen
21:55:40.62 Setting Lastuser: Sony Ericsson U1i [356810032102974]
21:55:40.62 Lade Userdatenbank: Sony Ericsson U1i [356810032102974]
21:55:40.62 GMT Einstellungen geladen
21:55:40.63 InfoSMS geladen
21:55:40.63 LoadDatafile: Phonebook.dat(32328 Bytes)
21:55:40.78 LoadDatafile: SimPhoneBook.dat(1743 Bytes)
21:55:40.81 Kontakte geladen
21:55:40.81 LoadDatafile: Organizer.dat(45 Bytes)
21:55:40.81 Organizer geladen
21:55:40.82 Notizen geladen
21:55:40.82 Load SMS Data...
21:55:40.82 LoadDatafile: SMS.dat(150110 Bytes)
21:55:40.82 SMS - Datenbank wird geladen...
21:55:41.15 SMS Laden - Readfile: 0 Split: 0 Parse: 328 HandleMultiSMS: 0 Nachrichten: 592
21:55:41.15 LoadDatafile: SMSArchive.dat(13993 Bytes)
21:55:41.15 SMS Archiv laden - Parse: 0
21:55:41.37 RefreshList (Archive): Addrows=0 Sort=16 MenuUpdate=0 Redraw=0
21:55:41.37 SMS Data Loaded...
21:55:41.37 SMS geladen
21:55:41.37 LoadDatafile: Calls.dat(2852 Bytes)
21:55:41.42 Anrufe geladen
21:55:41.46 Hauptfenster fertig geladen
21:55:42.06 Avaiable Ports: COM1=\Device\Serial0; COM17=\Device\USBSER000; COM18=\Device\USBSER001; COM19=\Device\USBSER002; COM20=\Device\USBSER003;
21:55:42.06 Neue COM-Bibliothek wird verwendet
21:55:42.06 SPort Properties set, opening COM18
21:55:42.07 After OpenPort
21:55:42.07 Settimeout: RT=2000 WT=200
21:55:42.57 Port 18 wurde geöffnet !
21:55:42.57 [TX]: AT+CGSN
21:55:42.62 [RX]: AT+CGSN

21:55:42.62 [RX]: 356810032102974
21:55:42.62 [RX]: OK
21:55:42.62 Settimeout: RT=15000 WT=1000
21:55:42.62 [TX]: ATI
21:55:42.63 [RX]: ATI

21:55:42.63 [RX]: Sony Ericsson U1i
21:55:42.63 [RX]: OK
21:55:42.65 [TX]: AT+CSCS="UTF-8"
21:55:42.67 [RX]: AT+CSCS="UTF-8"

21:55:42.67 [RX]: OK
21:55:42.67 [TX]: ATI3
21:55:42.68 [RX]: ATI3

21:55:42.68 [RX]: Sony Ericsson USB WMC Modem
21:55:42.68 [RX]: OK
21:55:42.68 [TX]: AT+CNMI=2,1,0,1
21:55:42.71 [RX]: AT+CNMI=2,1,0,1

21:55:42.71 [RX]: OK
21:55:42.73 [TX]: AT*ECAM=1
21:55:42.75 [RX]: AT*ECAM=1

21:55:42.75 [RX]: OK
21:55:42.75 [TX]: AT+CIND=?
21:55:42.81 [RX]: AT+CIND=?

21:55:42.81 [RX]: +CIND: ("service",(0-1)),("call",(0-1)),("callsetup",(0-3)),("callheld",(0-2)),("signal",(0-5)),("roam",(0-1)),("battchg",(0-5)),("batterywarning",(0-1)),("chargerconnected",(0-1)),("message",(0-1))
21:55:42.82 [RX]: OK
21:55:42.82 [TX]: AT+CBC
21:55:42.84 [RX]: AT+CBC

21:55:42.84 [RX]: +CBC: 1,95
21:55:42.85 [RX]: OK
21:55:42.85 [TX]: AT+CIND?
21:55:42.92 [RX]: AT+CIND?

21:55:42.92 [RX]: +CIND: 1,0,0,0,5,1,5,0,1,0
21:55:42.93 [RX]: OK
21:55:42.93 Alle Verbindungsaktionen beendet
21:55:43.00 Form_Activate fSync Operation=2
21:55:43.01 [TX]: AT*ECAM=0
21:55:43.03 [RX]: AT*ECAM=0

21:55:43.03 [RX]: OK
21:55:43.03 [TX]: AT+CSCA?
21:55:43.09 [RX]: AT+CSCA?

21:55:43.09 [RX]: +CSCA: "+31626000230",145
21:55:43.10 [RX]: OK
21:55:43.12 [TX]: AT+CPROT=0
21:55:43.18 [RX]: AT+CPROT=0

21:55:43.18 [RX]: CONNECTED
21:55:43.18 OBEX Connect: 16384 Bytes Paketgröße, Target: SYNCML-SYNC
21:55:43.18 [TX]: 80 00 15 10 00 40 00 46 00 0E 53 59 4E 43 4D 4C 2D 53 59 4E 43
21:55:58.20 [RX]: 0D 0A 4F 4B 0D 0A
21:55:58.20 Lesevorgang fehlerhaft! - Systemerror: 0 [De bewerking is voltooid.]
21:55:58.20 OBEX Disconnect
21:55:58.20 Settimeout: RT=10000 WT=1000
21:55:58.20 [TX]: 81 00 03
21:55:58.21 [RX]: 01 00 03
21:55:58.21 ErrMsg: Obex Protocol kon niet worden geïnitialiseerd!!
OBEX Errorcode: 01 - Unhandled Error
21:56:09.03 SaveDatafile: Phonebook.dat (32328 Bytes)
21:56:09.10 Settimeout: RT=15000 WT=1000
21:56:09.10 [TX]: AT*ECAM=1
21:56:09.13 [RX]: AT*ECAM=1

21:56:09.13 [RX]: OK
21:56:12.93 Settimeout: RT=1500 WT=800
21:56:12.93 [TX]: AT+CBC
21:56:12.96 [RX]: AT+CBC

21:56:12.96 [RX]: +CBC: 1,95
21:56:12.96 [RX]: OK
21:56:12.96 [TX]: AT+CIND?
21:56:13.03 [RX]: AT+CIND?

21:56:13.03 [RX]: +CIND: 1,0,0,0,5,1,5,0,1,0
21:56:13.06 [RX]: OK
21:56:23.06 [TX]: AT+CBC
21:56:23.07 [RX]: AT+CBC

21:56:23.07 [RX]: +CBC: 1,95
21:56:23.09 [RX]: OK
21:56:23.09 [TX]: AT+CIND?
21:56:23.15 [RX]: AT+CIND?

21:56:23.15 [RX]: +CIND: 1,0,0,0,5,1,5,0,1,0
21:56:23.17 [RX]: OK
21:56:33.17 [TX]: AT+CBC
21:56:33.20 [RX]: AT+CBC

21:56:33.20 [RX]: +CBC: 1,95
21:56:33.20 [RX]: OK
21:56:33.20 [TX]: AT+CIND?
21:56:33.28 [RX]: AT+CIND?

21:56:33.28 [RX]: +CIND: 1,0,0,0,5,1,5,0,1,0
21:56:33.29 [RX]: OK

At the moment i have enought testers. If all modifications are made i will assist more people for testing.

Hello FJ,

after buying a Satio to replace my P1i I was wondering if I could migrate all my P1i data in MPE to the Satio. After installing your beta-Version it worked pretty much for everything! I must say, MPE is a great piece of software!

For the SMS I had to go back to my P1i profile, save the messages to the Archive and export the archive (in-/outbox seperated) to an .sms file and import this file in the Satio Profile.

Synchronizing worked over Standard Modem over Bluetooth link (COM13), sometimes an OBEX NO CARRIER error showed up. Usually restarting bluetooth on my Satio would solve the problem in order to be able to synchronize again. Also, synchronizing the Satio calendar with my Google-Calendar worked fine. One bug: somewhere umlauts are not coded well and show funny symbols (same for contacts).

In contacts, somehow the standard mobile entry seems to be "mobile (business)", i don't know if that is a P1i standard or conversion bug.

Everything else works fine, even phone memory and sd-card access. Except no memory information for phone memory in the memory status section.

The entire bluetooth connection seems to work even without m-Router connected. m-Router can't connect to the Satio over bluetooth on my Win7. But PC-Suite 6.0 synchronizes well with Outlook 07 over cable.

Thanks for making our smartphone lives easier!!

excellent work, hope this phone will have full support soon,
a qq, as I know satio use symbian, if MPE will support the satio model why MPE can't support another symbian phones?

MPE supports already other symbian (UIQ3) based sony ericsson phones.

ceee, where did you get this beta?

Raed this thread - then you'll find also the link to the beta

As a Satio owner, I watch this topic closely. At the end of November I downloaded this file from the beginning of this thread:

http://www.fjsoft.at/files/MyPhoneExplo ... Update.exe

Unlilke ceee, I couldn't get Satio working with this version. Is there a new file under the same link? If yes, sorry for not getting it..

lldeon hat geschrieben:As a Satio owner, I watch this topic closely. At the end of November I downloaded this file from the beginning of this thread:

http://www.fjsoft.at/files/MyPhoneExplo ... Update.exe

Unlilke ceee, I couldn't get Satio working with this version. Is there a new file under the same link? If yes, sorry for not getting it..

Here you can see the change date of the beta version.

weinbi hat geschrieben:MPE supports already other symbian (UIQ3) based sony ericsson phones.

yes but I mean another non se phones, like nokia :$

Perfect, everything seem to work with my Satio. However, something strange with SMS module: Some messages (many of them starting with "N", "T" or "F") have this first letter omitted. Any idea why?

@csandoval012: MPE does only support SonyEricsson-Phones - also in future

@lldeon: They are cut of in MyPhoneExplorer ? if yes i think its caused from a little change in the SMS-Decoder. Please do the following with some problematic messages:
- doubleclick the message
- click on ">>"
- copy&paste the "PDU" into notepad
- write down also the correct text
- send the whole stuff to me via email

The beta version doesn't seem to want to work for me , it crashes during multi sync , it will work for sim contacts but freezes when syncing phone contacts . It syncs calls and messages but not organiser and notes sync close myphoneexplorer , also syncing files closes the program . Any suggestions please for more success ?

- reproduce the crash
- Start-Run-%appdata%\MyPhoneExplorer\Debug.txt-OK
- send me this file via email

ogdatei MyPhoneExplorer
************************
Programmversion: 1.7.4
nightly vom 14/01/2010 18:06:13
Datum: 16/01/2010

17:19:01.85 Setting Port: 6
17:19:01.85 Setting Baud: 921600
17:19:01.85 Avaiable Ports: COM6=\Device\BthModem1; COM7=\Device\BthModem0; COM19=\Device\BthModem2;
17:19:01.85 Main Load frmSplash
17:19:02.00 Load frmSplash...
17:19:02.00 Show splash...
17:19:02.02 frmSplash geladen
17:19:02.77 Hauptfenster wird geladen
17:19:02.95 Sidebar fertig geladen
17:19:03.01 Farbschema wurde gelesen
17:19:03.19 UC SMS wird geladen
17:19:03.24 UC Phonebook wird geladen
17:19:03.28 UC Phonebook fertig geladen
17:19:03.29 UC Calls wird geladen
17:19:03.34 UC Organizer wird geladen
17:19:03.43 Organizer initiated
17:19:03.52 Startpage=1
17:19:03.54 Startpage set
17:19:03.54 UC Filebrowser wird geladen
17:19:03.57 UC Filebrowser: Images werden geladen...
17:19:03.57 UC Filebrowser: Icons Haupttoolbar geladen
17:19:03.58 UC Filebrowser: Icons Detailtoolbar geladen
17:19:03.58 UC Filebrowser: Icons PLaylisttoolbar geladen
17:19:03.58 Lade Ordnericon
17:19:03.58 Lade Laufwerkicon
17:19:03.58 Lade sonstige Icons...
17:19:03.58 Lade Treeviewicons...
17:19:03.58 UC Filebrowser: Icons Listview geladen
17:19:03.58 UC Filebrowser: Sprachdaten werden geladen...
17:19:03.59 Winpreview exists=True
17:19:03.63 UC Filebrowser fertig geladen
17:19:03.63 UC AppBrowser wird geladen
17:19:03.64 UC Notes wird geladen
17:19:03.66 UC Calls wird geladen
17:19:03.69 Setting Lastuser: Sony Ericsson U1i [356810030304671]
17:19:03.70 Lade Userdatenbank: Sony Ericsson U1i [356810030304671]
17:19:03.70 GMT Einstellungen geladen
17:19:03.70 InfoSMS geladen
17:19:03.77 LoadDatafile: SimPhoneBook.dat(5326 Bytes)
17:19:03.80 Kontakte geladen
17:19:03.81 LoadDatafile: Calls.dat(702 Bytes)
17:19:03.88 Anrufe geladen
17:19:03.90 LoadDatafile: Organizer.dat(45 Bytes)
17:19:03.90 Organizer geladen
17:19:03.91 Notizen geladen
17:19:03.91 Load SMS Data...
17:19:03.91 LoadDatafile: SMS.dat(17800 Bytes)
17:19:03.91 SMS - Datenbank wird geladen...
17:19:03.93 SMS Laden - Readfile: 0 Split: 0 Parse: 15 HandleMultiSMS: 0 Nachrichten: 69
17:19:04.00 RefreshList (Archive): Addrows=0 Sort=0 MenuUpdate=0 Redraw=0
17:19:04.00 SMS Data Loaded...
17:19:04.00 SMS geladen
17:19:04.07 Hauptfenster fertig geladen
17:19:07.75 Refresh ComDescriptions...
17:19:07.76 PORT: COM19 Enumerator=BTHENUM Displayed=Standard Serial over Bluetooth link InstanceID=BTHENUM\{00001101-0000-1000-8000-00805F9B34FB}_LOCALMFG&0000\9&AD44820&0&000000000000_0000000A
17:19:07.76 PORT: COM7 Enumerator=BTHENUM Displayed='lenny's phone' Bluetooth-Port InstanceID=BTHENUM\{00001101-0000-1000-8000-00805F9B34FB}_VID&00010001_PID&001E\9&AD44820&0&6C0E0D3F5E6C_C0000000A
17:19:07.76 MODEM: COM6 Enumerator=BTHENUM LocationInfo= FriendlyName=Standard Modem over Bluetooth link #2 InstanceID=BTHENUM\{00001103-0000-1000-8000-00805F9B34FB}_VID&00010001_PID&001E\9&AD44820&0&6C0E0D3F5E6C_C0000000B
17:19:16.20 Refresh ComDescriptions...
17:19:16.20 PORT: COM19 Enumerator=BTHENUM Displayed=Standard Serial over Bluetooth link InstanceID=BTHENUM\{00001101-0000-1000-8000-00805F9B34FB}_LOCALMFG&0000\9&AD44820&0&000000000000_0000000A
17:19:16.20 PORT: COM7 Enumerator=BTHENUM Displayed='lenny's phone' Bluetooth-Port InstanceID=BTHENUM\{00001101-0000-1000-8000-00805F9B34FB}_VID&00010001_PID&001E\9&AD44820&0&6C0E0D3F5E6C_C0000000A
17:19:16.20 MODEM: COM6 Enumerator=BTHENUM LocationInfo= FriendlyName=Standard Modem over Bluetooth link #2 InstanceID=BTHENUM\{00001103-0000-1000-8000-00805F9B34FB}_VID&00010001_PID&001E\9&AD44820&0&6C0E0D3F5E6C_C0000000B
17:19:16.21 Port 6 wird geöffnet...
17:19:18.89 Einstellungen werden gesetzt (9600, N, 8, 1)
17:19:18.91 Puffer werden gesetzt...(16384)
17:19:18.91 Settimeout: RT=2000 WT=200
17:19:19.41 Port 6 wurde geöffnet !
17:19:19.41 Settimeout: RT=2000 WT=500
17:19:19.41 [TX]: AT+CBC
17:19:19.44 [RX]: AT+CBC
17:19:19.44 [RX]: +CBC: 1,80
17:19:19.44 [RX]: OK
17:19:19.45 Settimeout: RT=15000 WT=1000
17:19:19.45 [TX]: ATI
17:19:19.48 [RX]: ATI
17:19:19.48 [RX]: Sony Ericsson U1i
17:19:19.48 [RX]: OK
17:19:19.49 [TX]: AT+CPROT=0
17:19:21.58 [RX]: AT+CPROT=0
17:19:21.59 [RX]: NO CARRIER
17:19:21.59 Port 6 wird geschlossen
17:19:21.59 Port wurde geschlossen
17:19:21.61 Port 6 wird geöffnet...
17:19:21.94 Einstellungen werden gesetzt (19200, N, 8, 1)
17:19:21.96 Puffer werden gesetzt...(16384)
17:19:21.96 Settimeout: RT=2000 WT=200
17:19:22.46 Port 6 wurde geöffnet !
17:19:22.46 Settimeout: RT=2000 WT=100
17:19:22.47 [TX]: AT+CBC
17:19:22.54 [RX]: AT+CBC
17:19:22.54 [RX]: +CBC: 1,80
17:19:22.54 [RX]: OK
17:19:22.55 Port 6 wird geschlossen
17:19:22.55 Port wurde geschlossen
17:19:22.55 Port 6 wird geöffnet...
17:19:22.86 Einstellungen werden gesetzt (115200, N, 8, 1)
17:19:22.86 Puffer werden gesetzt...(16384)
17:19:22.87 Settimeout: RT=2000 WT=200
17:19:23.37 Port 6 wurde geöffnet !
17:19:23.37 Settimeout: RT=2000 WT=100
17:19:23.37 [TX]: AT+CBC
17:19:23.44 [RX]: AT+CBC
17:19:23.44 [RX]: +CBC: 1,80
17:19:23.44 [RX]: OK
17:19:23.45 Port 6 wird geschlossen
17:19:23.45 Port wurde geschlossen
17:19:23.45 Port 6 wird geöffnet...
17:19:23.76 Einstellungen werden gesetzt (256000, N, 8, 1)
17:19:23.79 Puffer werden gesetzt...(16384)
17:19:23.79 Settimeout: RT=2000 WT=200
17:19:24.29 Port 6 wurde geöffnet !
17:19:24.29 Settimeout: RT=2000 WT=100
17:19:24.29 [TX]: AT+CBC
17:19:24.32 [RX]: AT+CBC
17:19:24.32 [RX]: +CBC: 1,80
17:19:24.32 [RX]: OK
17:19:24.33 Port 6 wird geschlossen
17:19:24.33 Port wurde geschlossen
17:19:24.33 Port 6 wird geöffnet...
17:19:24.65 Einstellungen werden gesetzt (460800, N, 8, 1)
17:19:24.68 Puffer werden gesetzt...(16384)
17:19:24.68 Settimeout: RT=2000 WT=200
17:19:25.18 Port 6 wurde geöffnet !
17:19:25.18 Settimeout: RT=2000 WT=100
17:19:25.18 [TX]: AT+CBC
17:19:25.25 [RX]: AT+CBC
17:19:25.26 [RX]: +CBC: 1,80
17:19:25.26 [RX]: OK
17:19:25.26 Port 6 wird geschlossen
17:19:25.26 Port wurde geschlossen
17:19:25.27 Port 6 wird geöffnet...
17:19:25.58 Einstellungen werden gesetzt (921600, N, 8, 1)
17:19:25.61 Puffer werden gesetzt...(16384)
17:19:25.61 Settimeout: RT=2000 WT=200
17:19:26.11 Port 6 wurde geöffnet !
17:19:26.11 Settimeout: RT=2000 WT=100
17:19:26.11 [TX]: AT+CBC
17:19:26.15 [RX]: AT+CBC
17:19:26.15 [RX]: +CBC: 1,80
17:19:26.16 [RX]: OK
17:19:26.16 Port 6 wird geschlossen
17:19:26.16 Port wurde geschlossen
17:19:48.98 Refresh ComDescriptions...
17:19:48.98 PORT: COM19 Enumerator=BTHENUM Displayed=Standard Serial over Bluetooth link InstanceID=BTHENUM\{00001101-0000-1000-8000-00805F9B34FB}_LOCALMFG&0000\9&AD44820&0&000000000000_0000000A
17:19:48.99 PORT: COM7 Enumerator=BTHENUM Displayed='lenny's phone' Bluetooth-Port InstanceID=BTHENUM\{00001101-0000-1000-8000-00805F9B34FB}_VID&00010001_PID&001E\9&AD44820&0&6C0E0D3F5E6C_C0000000A
17:19:48.99 MODEM: COM6 Enumerator=BTHENUM LocationInfo= FriendlyName=Standard Modem over Bluetooth link #2 InstanceID=BTHENUM\{00001103-0000-1000-8000-00805F9B34FB}_VID&00010001_PID&001E\9&AD44820&0&6C0E0D3F5E6C_C0000000B
17:19:48.99 Port 6 wird geöffnet...
17:19:54.12 Systemerror: 121 [The semaphore timeout period has expired.]
17:19:54.12 COM6 could not be opened
Systemerror: 121 [The semaphore timeout period has expired.]
17:19:54.13 Port 7 wird geöffnet...
17:19:59.26 Systemerror: 121 [The semaphore timeout period has expired.]
17:19:59.26 COM7 could not be opened
Systemerror: 121 [The semaphore timeout period has expired.]
17:19:59.26 Port 19 wird geöffnet...
17:19:59.27 Einstellungen werden gesetzt (9600, N, 8, 1)
17:19:59.27 Puffer werden gesetzt...(16384)
17:19:59.27 Settimeout: RT=2000 WT=200
17:19:59.77 Port 19 wurde geöffnet !
17:19:59.77 Settimeout: RT=2000 WT=500
17:20:00.45 [TX]: AT+CBC
17:20:00.45 Systemerror: 0 [The operation completed successfully.]
17:20:00.45 Port 19 wird geschlossen
17:20:00.45 Port wurde geschlossen
17:20:13.82 Refresh ComDescriptions...
17:20:13.82 PORT: COM19 Enumerator=BTHENUM Displayed=Standard Serial over Bluetooth link InstanceID=BTHENUM\{00001101-0000-1000-8000-00805F9B34FB}_LOCALMFG&0000\9&AD44820&0&000000000000_0000000A
17:20:13.82 PORT: COM7 Enumerator=BTHENUM Displayed='lenny's phone' Bluetooth-Port InstanceID=BTHENUM\{00001101-0000-1000-8000-00805F9B34FB}_VID&00010001_PID&001E\9&AD44820&0&6C0E0D3F5E6C_C0000000A
17:20:13.82 MODEM: COM6 Enumerator=BTHENUM LocationInfo= FriendlyName=Standard Modem over Bluetooth link #2 InstanceID=BTHENUM\{00001103-0000-1000-8000-00805F9B34FB}_VID&00010001_PID&001E\9&AD44820&0&6C0E0D3F5E6C_C0000000B
17:20:13.83 Port 6 wird geöffnet...
17:20:18.95 Systemerror: 121 [The semaphore timeout period has expired.]
17:20:18.95 COM6 could not be opened
Systemerror: 121 [The semaphore timeout period has expired.]
17:20:18.97 Port 7 wird geöffnet...
17:20:24.10 Systemerror: 121 [The semaphore timeout period has expired.]
17:20:24.10 COM7 could not be opened
Systemerror: 121 [The semaphore timeout period has expired.]
17:20:24.11 Port 19 wird geöffnet...
17:20:24.11 Einstellungen werden gesetzt (9600, N, 8, 1)
17:20:24.11 Puffer werden gesetzt...(16384)
17:20:24.11 Settimeout: RT=2000 WT=200
17:20:24.61 Port 19 wurde geöffnet !
17:20:24.61 Settimeout: RT=2000 WT=500
17:20:25.29 [TX]: AT+CBC
17:20:25.29 Systemerror: 0 [The operation completed successfully.]
17:20:25.30 Port 19 wird geschlossen
17:20:25.30 Port wurde geschlossen
17:20:51.91 OK pressed in settingswindow
17:20:51.95 Set first swap of settings
17:20:51.95 Apply new holidays
17:20:51.95 Holidays applied

There is no sync in this log. You say that it happens during sync...