FJ Software

Some background:

Zajec hat geschrieben:Hi FJ,

Is this possible to implement "stable connection" for USB for Android? You should remember this feature from SE (not Android) connections.

This is required for phone identification when using MPE on Linux (via Wine).

FJ hat geschrieben:Stable connection is not needed for Android cause the connection is based now on TCP/IP, the SE-Models were controlled throught COM-Ports which did not fully work on Linux.

I use Wine 1.2 and MyPhoneExplorer 1.8.0. I checked "Android" in Settings and clicked "Connect" (F1) and I got "Connecting..." popup. On half of progress I saw "Identification..." and another popup appeared: "Connection to phone could not be established", "Phone could not be identified".

My phone is Samsung I9000 (Galaxy) and I'm sure it's configured correctly (MPE, USB debugging) as it works fine with MyPhoneExplorer on Windows XP.

Any tip/help, please?

OK, I discovered something new. If I click F1/Connect once more it seems to connect fine. In bottom status bar I can see "Phone connected: R-And via COM1".

However xxx "Synchronize" does not work correctly. I see "Please wait...", "Synchronizing phonebook..." and right after that popup with "Obex protocol could not be initialized. OBEX Error: ERROR".

xxx "Synchronize" again results in the same error.

Is that TCP/IP over USB? Is this trackable with Wireshark? Could I debug problem by comparing dumps between Linux and Windows?

edit:
For some reason MPE does not seem to notice Android's reponse for broadcast.

Code: Alles auswählen

Src: 192.168.1.141 Dst: 255.255.255.255
Code:
0000   42 72 6f 61 64 63 61 73 74 20 66 72 6f 6d 20 4d  Broadcast from MyPhoneExplorer
0010   79 50 68 6f 6e 65 45 78 70 6c 6f 72 65 72

Code: Alles auswählen

Src: 192.168.1.184 Dst: 192.168.1.141
Code:
0000   30 30 32 39 31 35 33 37 33 43 31 37 31 36 32 45  002915373C17162E
0010   31 44 30 39 35 45 35 46 34 32 35 33 33 46 30 46  1D095E5F42533F0F
0020   30 36 33 33 33 41 31 43 31 44 31 46 31 39 34 38  06333A1C1D1F1948
0030   30 42 30 32 31 45 30 37 37 42 36 38 36 42 36 45  0B021E077B686B6E
0040   37 44 34 38 34 42 35 46 31 39 34 41 30 37 30 34  7D484B5F194A0704
0050   30 37 30 45 37 43 36 30 37 31 36 39 36 41 34 38  070E7C6071696A48
0060   34 32 35 41 35 37 34 46 34 45 34 33 35 31 35 42  425A574F4E43515B
0070   33 45 32 35 32 42 33 38 37 33 33 45 32 37 34 36  3E252B38733E2746
0080   32 43 34 30 30 32 30 30 30 30                    2C40020000

Any help/tip? Is this answer incorrect or MPE didn't receive it at all?

combined both threads!

Please install the newest beta of the client on phone: www.fjsoft.at/mpeclient.apk

And its much more useful to post the logfile of MPE (which shows also all transfered data and logging informations)

FJ hat geschrieben:Please install the newest beta of the client on phone: www.fjsoft.at/mpeclient.apk

And its much more useful to post the logfile of MPE (which shows also all transfered data and logging informations)

Sorry for late reply. I've tried 1.0.7 beta 14 and MPE still can not find my Android's IP.

Code: Alles auswählen

16:37:54.42       OK pressed in settingswindow
16:37:54.45       Set first swap of settings
16:37:54.45       Apply new holidays
16:37:54.45       DoItemUpdate
16:37:54.65       DoItemUpdate fertig
16:37:54.68       Holidays applied
16:37:54.69       Second swap of settings set
16:37:54.69       Everything is done
16:37:57.30       Sending broadcast
16:37:57.81       Sending broadcast
16:37:58.31       Sending broadcast
16:37:59.31       bOpened=False
16:37:59.31       Failed to obtain the IP-address of the phone
16:37:59.31       Refresh ComDescriptions...
16:37:59.33       ErrMsg: Connection to phone could not be established:
Failed to obtain the IP-address of the phone
16:38:06.57       Sending broadcast
16:38:07.07       Sending broadcast
16:38:07.57       Sending broadcast
16:38:08.57       bOpened=False
16:38:08.57       Failed to obtain the IP-address of the phone
16:38:08.57       Refresh ComDescriptions...
16:38:08.57       ErrMsg: Connection to phone could not be established:
Failed to obtain the IP-address of the phone

Maybe it has to do with the Wine-Environment that the Broadcasts do not work. You can also use the newest beta of the Desktop-Software which supports connecting to a predefined IP-Address.

http://www.fjsoft.at/files/MyPhoneExplo ... Update.exe

FJ Software

Wine+MPE: "Phone could not be identified" for Andr

Wine+MPE: "Phone could not be identified" for Andr