FJ Software

I can sync my contacts with outlook 2003. I am able to make the phone dial through bluetooth from my PC so bluetooth works OK ! The phone battery status is wrong, I cant get any Calls related info.

Here's the debug log.

Logdatei MyPhoneExplorer
************************
Programmversion: 1.8.1
Datum: 20/09/2011

17:01:29.73 Setting Port: 999
17:01:29.73 Setting Baud: 115200
17:01:29.73 Avaiable Ports: COM1=\Device\Serial1; COM3=\Device\Serial0; COM4=\Device\AgereModem5; COM11=\Device\Mbm1Mdm0; COM12=\Device\Mbm1Mdm1; COM13=\Device\Mbm1DevMt0; COM14=\Device\Mbm1DevMt1; COM15=\Device\e36wgps0;
17:01:29.73 Main Load frmSplash
17:01:29.74 Load frmSplash...
17:01:29.74 Show splash...
17:01:29.76 frmSplash geladen
17:01:30.79 Hauptfenster wird geladen
17:01:31.00 Sidebar fertig geladen
17:01:31.08 UC SMS wird geladen
17:01:31.15 UC Phonebook wird geladen
17:01:31.19 UC Phonebook fertig geladen
17:01:31.19 UC Calls wird geladen
17:01:31.23 UC Organizer wird geladen
17:01:31.35 Organizer initiated
17:01:31.40 Startpage=1
17:01:31.41 UC Filebrowser wird geladen
17:01:31.52 UC Filebrowser fertig geladen
17:01:31.52 UC AppBrowser wird geladen
17:01:31.54 UC Notes wird geladen
17:01:31.56 UC Calls wird geladen
17:01:31.60 Setting Lastuser: hs2320 [354908030112755]
17:01:31.62 Lade Userdatenbank: hs2320 [354908030112755]
17:01:31.66 Kontakte geladen
17:01:31.67 Anrufe geladen
17:01:31.68 LoadDatafile: Organizer.dat(45 Bytes)
17:01:31.70 DoItemUpdate
17:01:31.73 DoItemUpdate fertig
17:01:31.73 Organizer geladen
17:01:31.73 Notizen geladen
17:01:31.73 Load SMS Data...
17:01:31.76 RefreshList (Archive): Addrows=0 Sort=0 MenuUpdate=0 Redraw=0
17:01:31.76 SMS Data Loaded...
17:01:31.76 SMS geladen
17:01:32.32 Hauptfenster fertig geladen
17:01:32.78 Downloader: RC=6 BytesMax=5 URL=http://www.fjsoft.at/myphoneexplorer/version.txt
17:01:35.16 Refresh ComDescriptions...
17:01:35.33 PORT: COM1 Enumerator=ACPI Displayed=Communications Port InstanceID=ACPI\PNP0501\5&3B281323&0
17:01:35.33 PORT: COM15 Enumerator=HP Displayed=HP hs2320 Mobile Broadband Module NMEA InstanceID=HP\GPS2\3549080301127550_09
17:01:35.34 PORT: COM3 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_3B67&SUBSYS_1521103C&REV_06\3&E89B380&0&B3
17:01:35.34 PORT: COM13 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Device Management InstanceID=USB\VID_03F0&PID_261D&MI_05\3549080301127550_05
17:01:35.34 PORT: COM14 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Device Management InstanceID=USB\VID_03F0&PID_261D&MI_08\3549080301127550_08
17:01:35.47 MODEM: COM4 Enumerator=HDAUDIO Displayed=LSI HDA Modem FriendlyName=LSI HDA Modem InstanceID=HDAUDIO\FUNC_02&VEN_11C1&DEV_1040&SUBSYS_103C3066&REV_1002\4&416FB0E&0&0101
17:01:35.47 MODEM: COM11 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Modem FriendlyName=HP hs2320 Mobile Broadband Module Modem InstanceID=USB\VID_03F0&PID_261D&MI_01\3549080301127550_01
17:01:35.47 MODEM: COM12 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Data Modem FriendlyName=HP hs2320 Mobile Broadband Module Data Modem InstanceID=USB\VID_03F0&PID_261D&MI_03\3549080301127550_03
17:01:36.65 StickyNotesPath=C:\Windows\system32\StikyNot.exe FileExists=True
17:01:36.65 StickyNotesTitle=Sticky Notes
17:01:48.53 OK pressed in settingswindow
17:01:48.62 Set first swap of settings
17:01:48.63 Apply new holidays
17:01:48.63 DoItemUpdate
17:01:48.65 DoItemUpdate fertig
17:01:48.65 Holidays applied
17:01:48.66 Second swap of settings set
17:01:48.66 Everything is done
17:01:50.13 Avaiable Ports: COM1=\Device\Serial1; COM3=\Device\Serial0; COM4=\Device\AgereModem5; COM11=\Device\Mbm1Mdm0; COM12=\Device\Mbm1Mdm1; COM13=\Device\Mbm1DevMt0; COM14=\Device\Mbm1DevMt1; COM15=\Device\e36wgps0;
17:01:50.13 Neue COM-Bibliothek wird verwendet
17:01:50.13 SPort Properties set, opening COM13
17:01:50.18 After OpenPort
17:01:50.18 Settimeout: RT=2000 WT=500
17:01:50.68 Port 13 wurde geöffnet !
17:01:50.68 bOpened=True
17:01:50.68 [RX]: *EMRDY: 1
17:01:50.68 [TX]: AT+CGSN
17:01:50.70 [RX]: AT+CGSN

17:01:50.70 [RX]: 354908030112755
17:01:50.70 [RX]: OK
17:01:50.70 Settimeout: RT=15000 WT=1000
17:01:50.71 [TX]: ATI
17:01:50.78 [RX]: ATI

17:01:50.78 [RX]: hs2320
17:01:50.78 [RX]: OK
17:01:50.79 [TX]: AT*APPVERSION=1.8.1
17:01:50.79 [RX]: AT*APPVERSION=1.8.1

17:01:50.79 [RX]: ERROR
17:01:50.80 [TX]: AT+CSCS="UTF-8"
17:01:50.81 [RX]: AT+CSCS="UTF-8"

17:01:50.81 [RX]: OK
17:01:50.81 [TX]: ATI3
17:01:51.27 [RX]: ATI3

17:01:51.27 [RX]: hs2320 Mobile Broadband Modem
17:01:51.27 [RX]: OK
17:01:51.27 [TX]: AT+CNMI=2,1,0,1
17:01:51.29 [RX]: AT+CNMI=2,1,0,1

17:01:51.29 [RX]: ERROR
17:01:51.29 [TX]: AT*ECAM=1
17:01:51.30 [RX]: AT*ECAM=1

17:01:51.30 [RX]: OK
17:01:51.31 [TX]: AT+CIND=?
17:01:51.32 [RX]: AT+CIND=?

17:01:51.32 [RX]: ERROR
17:01:51.33 [TX]: AT+CBC
17:01:51.35 [RX]: AT+CBC

17:01:51.35 [RX]: +CBC: 0,1
17:01:51.37 [RX]: OK
17:01:51.37 [TX]: AT+CSQ
17:01:51.38 [RX]: AT+CSQ

17:01:51.39 [RX]: ERROR
17:01:51.39 Alle Verbindungsaktionen beendet
17:01:51.39 [TX]: AT+CSCA?
17:01:51.41 [RX]: AT+CSCA?

17:01:51.41 [RX]: ERROR
17:01:55.47 [TX]: AT+CBC
17:01:55.50 [RX]: AT+CBC

17:01:55.50 [RX]: +CBC: 0,1
17:01:55.50 [RX]: OK
17:01:55.60 Form_Activate fSync Operation=7
17:01:55.60 [TX]: AT*ECAM=0
17:01:55.62 [RX]: AT*ECAM=0

17:01:55.62 [RX]: OK
17:01:55.62 [TX]: AT+CCLK?
17:01:55.63 [RX]: AT+CCLK?

17:01:55.63 [RX]: ERROR
17:01:55.64 [TX]: AT+CPROT=0
17:01:55.66 [RX]: AT+CPROT=0

17:01:55.66 [RX]: ERROR
17:01:55.66 [TX]: AT*EOBEX
17:01:55.69 [RX]: AT*EOBEX

17:01:55.69 [RX]: ERROR
17:01:55.69 ErrMsg: Obex protocol could not be initialized!
OBEX Error: ERROR
17:01:57.27 [TX]: AT*ECAM=1
17:01:57.29 [RX]: AT*ECAM=1

17:01:57.29 [RX]: OK
17:01:58.54 [TX]: AT+CBC
17:01:58.56 [RX]: AT+CBC

17:01:58.56 [RX]: +CBC: 0,1
17:01:58.56 [RX]: OK
17:01:58.64 Form_Activate fSync Operation=5
17:01:58.65 [TX]: AT*ECAM=0
17:01:58.66 [RX]: AT*ECAM=0

17:01:58.66 [RX]: OK
17:01:58.66 [TX]: AT+CPBS="DC"
17:01:58.68 [RX]: AT+CPBS="DC"

17:01:58.68 [RX]: ERROR
17:01:58.69 SaveDatafile: Calls.dat (0 Bytes)
17:01:58.69 [TX]: AT*ECAM=1
17:01:58.70 [RX]: AT*ECAM=1

17:01:58.70 [RX]: OK
17:02:01.40 Settimeout: RT=1500 WT=800
17:02:01.40 [TX]: AT+CBC
17:02:01.42 [RX]: AT+CBC

17:02:01.42 [RX]: +CBC: 0,1
17:02:01.42 [RX]: OK
17:02:01.42 [TX]: AT+CSQ
17:02:01.44 [RX]: AT+CSQ

17:02:01.44 [RX]: ERROR
17:02:04.44 Settimeout: RT=15000 WT=1000
17:02:04.44 [TX]: AT+CBC
17:02:04.46 [RX]: AT+CBC

17:02:04.46 [RX]: +CBC: 0,1
17:02:04.46 [RX]: OK
17:02:04.54 Form_Activate fSync Operation=13
17:02:04.55 [TX]: AT*ECAM=0
17:02:04.56 [RX]: AT*ECAM=0

17:02:04.56 [RX]: OK
17:02:04.57 [TX]: AT+CCLK?
17:02:04.58 [RX]: AT+CCLK?

17:02:04.58 [RX]: ERROR
17:02:04.72 [TX]: AT*EOBEX
17:02:04.74 [RX]: AT*EOBEX

17:02:04.74 [RX]: ERROR
17:02:04.75 ErrMsg: Obex protocol could not be initialized!
OBEX Error: ERROR
17:02:05.77 SaveDatafile: Notes.dat (0 Bytes)
17:02:05.77 [TX]: AT*ECAM=1
17:02:05.79 [RX]: AT*ECAM=1

17:02:05.79 [RX]: OK
17:02:07.87 Refresh ComDescriptions...
17:02:08.02 PORT: COM1 Enumerator=ACPI Displayed=Communications Port InstanceID=ACPI\PNP0501\5&3B281323&0
17:02:08.03 PORT: COM15 Enumerator=HP Displayed=HP hs2320 Mobile Broadband Module NMEA InstanceID=HP\GPS2\3549080301127550_09
17:02:08.03 PORT: COM3 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_3B67&SUBSYS_1521103C&REV_06\3&E89B380&0&B3
17:02:08.03 PORT: COM13 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Device Management InstanceID=USB\VID_03F0&PID_261D&MI_05\3549080301127550_05
17:02:08.03 PORT: COM14 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Device Management InstanceID=USB\VID_03F0&PID_261D&MI_08\3549080301127550_08
17:02:08.19 MODEM: COM4 Enumerator=HDAUDIO Displayed=LSI HDA Modem FriendlyName=LSI HDA Modem InstanceID=HDAUDIO\FUNC_02&VEN_11C1&DEV_1040&SUBSYS_103C3066&REV_1002\4&416FB0E&0&0101
17:02:08.19 MODEM: COM11 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Modem FriendlyName=HP hs2320 Mobile Broadband Module Modem InstanceID=USB\VID_03F0&PID_261D&MI_01\3549080301127550_01
17:02:08.19 MODEM: COM12 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Data Modem FriendlyName=HP hs2320 Mobile Broadband Module Data Modem InstanceID=USB\VID_03F0&PID_261D&MI_03\3549080301127550_03

I forgot to mention that I receive this on the GUI as per the debug log when attempting to sync.

You tried to connect with your "HP hs2320 Mobile Broadband Module Device".

Choose "Phone with Android-OS" in the settings

This was already set. I was trying to connect Via bluetooth COM13 HP HS2320... I tried other bluetooth possibilities...

Anyway I solved my problem by using Google Calendar Sync.
Tx, /JL

Ah - OK. In this case you did not pair your phone to the PC, cause there were no serial ports assigned to your X10

USB Cable Did not work either. I am using MyPhoneExplorer with other SonyEricsson Phone via cable on Win XP, never had problems.

The X10 mini is not "another" SonyEricsson phone. Its based on Android, which is completly diffrent to older phone from SE. Please read the FAQ, i can guarantee that it will work with Bluetooth AND USB AND ALSO WiFi if you do the right steps

It is not a X10 but a Xperia™ mini pro. Check SE site. Agreed that Android 2.3 powered should work. Maybe something on my Win Vista ?!?

Xperia™ mini pro = X10 mini pro

I think you did not read my post. Read the FAQ and if you have no sucess then tell me which step is the problem

FJ hat geschrieben:Xperia™ mini pro = X10 mini pro

I think you did not read my post. Read the FAQ and if you have no sucess then tell me which step is the problem

"Xperia X10 mini pro" and "Xperia mini pro" (alias SK17i) are two totally different phones.
These phones are often confused because they are somewhat similar in size and appearance.

Please, look at
http://www.sonyericsson.com/cws/corpora ... x10minipro
http://www.sonyericsson.com/cws/corpora ... a-mini-pro

I have the SK17a Xperia MiniPro. I know I dont have a X10 ! I think my debug log above is still valid!


Settings:
- Phone with Google Android
- Autodetect
- Diable automatyic connect disconnect

Result:
Identification 50%. Error message = "Connection to phone could no be established: Phone could not be identified"

Logdatei MyPhoneExplorer
************************
Programmversion: 1.8.1
Datum: 29/09/2011

09:30:23.89 Setting Port: 999
09:30:23.91 Setting Baud: 115200
09:30:23.91 Avaiable Ports: COM1=\Device\Serial1; COM3=\Device\Serial0; COM4=\Device\AgereModem5; COM11=\Device\Mbm1Mdm0; COM12=\Device\Mbm1Mdm1; COM13=\Device\Mbm1DevMt0; COM14=\Device\Mbm1DevMt1; COM15=\Device\e36wgps0;
09:30:24.02 Main Load frmSplash
09:30:24.24 Load frmSplash...
09:30:24.25 Show splash...
09:30:24.33 frmSplash geladen
09:30:28.10 Hauptfenster wird geladen
09:30:29.20 Sidebar fertig geladen
09:30:29.55 UC SMS wird geladen
09:30:29.82 UC Phonebook wird geladen
09:30:29.92 UC Phonebook fertig geladen
09:30:29.92 UC Calls wird geladen
09:30:30.03 UC Organizer wird geladen
09:30:30.35 Organizer initiated
09:30:30.44 Startpage=1
09:30:30.50 UC Filebrowser wird geladen
09:30:30.90 UC Filebrowser fertig geladen
09:30:30.90 UC AppBrowser wird geladen
09:30:30.93 UC Notes wird geladen
09:30:30.97 UC Calls wird geladen
09:30:31.09 Setting Lastuser: hs2320 [354908030112755]
09:30:31.16 Lade Userdatenbank: hs2320 [354908030112755]
09:30:31.25 Kontakte geladen
09:30:31.26 Anrufe geladen
09:30:31.33 LoadDatafile: Organizer.dat(45 Bytes)
09:30:31.36 DoItemUpdate
09:30:31.43 DoItemUpdate fertig
09:30:31.44 Organizer geladen
09:30:31.44 Notizen geladen
09:30:31.45 Load SMS Data...
09:30:31.52 RefreshList (Archive): Addrows=0 Sort=0 MenuUpdate=0 Redraw=0
09:30:31.52 SMS Data Loaded...
09:30:31.52 SMS geladen
09:30:32.78 Hauptfenster fertig geladen
09:30:33.09 Downloader: RC=6 BytesMax=5 URL=http://www.fjsoft.at/myphoneexplorer/version.txt
09:30:55.63 Refresh ComDescriptions...
09:30:55.94 PORT: COM1 Enumerator=ACPI Displayed=Communications Port InstanceID=ACPI\PNP0501\5&3B281323&0
09:30:55.95 PORT: COM15 Enumerator=HP Displayed=HP hs2320 Mobile Broadband Module NMEA InstanceID=HP\GPS2\3549080301127550_09
09:30:55.95 PORT: COM3 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_3B67&SUBSYS_1521103C&REV_06\3&E89B380&0&B3
09:30:55.95 PORT: COM13 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Device Management InstanceID=USB\VID_03F0&PID_261D&MI_05\3549080301127550_05
09:30:55.95 PORT: COM14 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Device Management InstanceID=USB\VID_03F0&PID_261D&MI_08\3549080301127550_08
09:30:56.22 MODEM: COM4 Enumerator=HDAUDIO Displayed=LSI HDA Modem FriendlyName=LSI HDA Modem InstanceID=HDAUDIO\FUNC_02&VEN_11C1&DEV_1040&SUBSYS_103C3066&REV_1002\4&416FB0E&0&0101
09:30:56.22 MODEM: COM11 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Modem FriendlyName=HP hs2320 Mobile Broadband Module Modem InstanceID=USB\VID_03F0&PID_261D&MI_01\3549080301127550_01
09:30:56.23 MODEM: COM12 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Data Modem FriendlyName=HP hs2320 Mobile Broadband Module Data Modem InstanceID=USB\VID_03F0&PID_261D&MI_03\3549080301127550_03
09:31:00.89 StickyNotesPath=C:\Windows\system32\StikyNot.exe FileExists=True
09:31:01.02 StickyNotesTitle=Sticky Notes
09:31:58.75 OK pressed in settingswindow
09:31:58.95 Set first swap of settings
09:31:58.97 Apply new holidays
09:31:58.97 DoItemUpdate
09:31:58.99 DoItemUpdate fertig
09:31:59.00 Holidays applied
09:31:59.02 Second swap of settings set
09:31:59.02 Everything is done
09:32:06.91 Try connecting to 10.10.0.135 (fixed IP)...
09:32:08.04 Broadcaster started
09:32:08.04 Sending broadcast
09:32:08.55 Sending broadcast
09:32:09.06 Sending broadcast
09:32:10.05 Closing Broadcaster
09:32:10.05 RunADBCommand: start-server
09:32:14.53 ADB CommandResponse: * daemon not running. starting it now on port 5037 *
* daemon started successfully *
09:32:14.53 RunADBCommand: devices
09:32:14.60 ADB CommandResponse: List of devices attached
09:32:14.60 Run DeviceTracker
09:32:14.61 Init Tracker
09:32:14.61 Device Tracker Message: OKAY0000
09:32:14.61 Avaiable Ports: COM1=\Device\Serial1; COM3=\Device\Serial0; COM4=\Device\AgereModem5; COM11=\Device\Mbm1Mdm0; COM12=\Device\Mbm1Mdm1; COM13=\Device\Mbm1DevMt0; COM14=\Device\Mbm1DevMt1; COM15=\Device\e36wgps0;
09:32:14.61 Neue COM-Bibliothek wird verwendet
09:32:14.62 SPort Properties set, opening COM3
09:32:14.65 After OpenPort
09:32:14.65 Settimeout: RT=2000 WT=500
09:32:15.15 Port 3 wurde geöffnet !
09:32:15.15 bOpened=True
09:32:15.16 [TX]: AT+CGSN
09:32:17.18 Got no Model, close port
09:32:17.18 Port 3 wird geschlossen
09:32:17.30 Port wurde geschlossen
09:32:17.32 Phone could not be identified
09:32:17.32 Refresh ComDescriptions...
09:32:17.50 PORT: COM1 Enumerator=ACPI Displayed=Communications Port InstanceID=ACPI\PNP0501\5&3B281323&0
09:32:17.50 PORT: COM15 Enumerator=HP Displayed=HP hs2320 Mobile Broadband Module NMEA InstanceID=HP\GPS2\3549080301127550_09
09:32:17.50 PORT: COM3 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_3B67&SUBSYS_1521103C&REV_06\3&E89B380&0&B3
09:32:17.50 PORT: COM13 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Device Management InstanceID=USB\VID_03F0&PID_261D&MI_05\3549080301127550_05
09:32:17.50 PORT: COM14 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Device Management InstanceID=USB\VID_03F0&PID_261D&MI_08\3549080301127550_08
09:32:17.63 MODEM: COM4 Enumerator=HDAUDIO Displayed=LSI HDA Modem FriendlyName=LSI HDA Modem InstanceID=HDAUDIO\FUNC_02&VEN_11C1&DEV_1040&SUBSYS_103C3066&REV_1002\4&416FB0E&0&0101
09:32:17.64 MODEM: COM11 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Modem FriendlyName=HP hs2320 Mobile Broadband Module Modem InstanceID=USB\VID_03F0&PID_261D&MI_01\3549080301127550_01
09:32:17.64 MODEM: COM12 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Data Modem FriendlyName=HP hs2320 Mobile Broadband Module Data Modem InstanceID=USB\VID_03F0&PID_261D&MI_03\3549080301127550_03
09:32:17.64 ErrMsg: Connection to phone could not be established:
Phone could not be identified
09:33:32.40 Refresh ComDescriptions...
09:33:32.69 PORT: COM1 Enumerator=ACPI Displayed=Communications Port InstanceID=ACPI\PNP0501\5&3B281323&0
09:33:32.69 PORT: COM15 Enumerator=HP Displayed=HP hs2320 Mobile Broadband Module NMEA InstanceID=HP\GPS2\3549080301127550_09
09:33:32.70 PORT: COM3 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_3B67&SUBSYS_1521103C&REV_06\3&E89B380&0&B3
09:33:32.70 PORT: COM13 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Device Management InstanceID=USB\VID_03F0&PID_261D&MI_05\3549080301127550_05
09:33:32.70 PORT: COM14 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Device Management InstanceID=USB\VID_03F0&PID_261D&MI_08\3549080301127550_08
09:33:32.98 MODEM: COM4 Enumerator=HDAUDIO Displayed=LSI HDA Modem FriendlyName=LSI HDA Modem InstanceID=HDAUDIO\FUNC_02&VEN_11C1&DEV_1040&SUBSYS_103C3066&REV_1002\4&416FB0E&0&0101
09:33:32.98 MODEM: COM11 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Modem FriendlyName=HP hs2320 Mobile Broadband Module Modem InstanceID=USB\VID_03F0&PID_261D&MI_01\3549080301127550_01
09:33:32.98 MODEM: COM12 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Data Modem FriendlyName=HP hs2320 Mobile Broadband Module Data Modem InstanceID=USB\VID_03F0&PID_261D&MI_03\3549080301127550_03

The phone is there with USB. The phone assiciated drive has been mounted (9h36).


Phone could not be identified
09:33:32.40 Refresh ComDescriptions...
09:33:32.69 PORT: COM1 Enumerator=ACPI Displayed=Communications Port InstanceID=ACPI\PNP0501\5&3B281323&0
09:33:32.69 PORT: COM15 Enumerator=HP Displayed=HP hs2320 Mobile Broadband Module NMEA InstanceID=HP\GPS2\3549080301127550_09
09:33:32.70 PORT: COM3 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_3B67&SUBSYS_1521103C&REV_06\3&E89B380&0&B3
09:33:32.70 PORT: COM13 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Device Management InstanceID=USB\VID_03F0&PID_261D&MI_05\3549080301127550_05
09:33:32.70 PORT: COM14 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Device Management InstanceID=USB\VID_03F0&PID_261D&MI_08\3549080301127550_08
09:33:32.98 MODEM: COM4 Enumerator=HDAUDIO Displayed=LSI HDA Modem FriendlyName=LSI HDA Modem InstanceID=HDAUDIO\FUNC_02&VEN_11C1&DEV_1040&SUBSYS_103C3066&REV_1002\4&416FB0E&0&0101
09:33:32.98 MODEM: COM11 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Modem FriendlyName=HP hs2320 Mobile Broadband Module Modem InstanceID=USB\VID_03F0&PID_261D&MI_01\3549080301127550_01
09:33:32.98 MODEM: COM12 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Data Modem FriendlyName=HP hs2320 Mobile Broadband Module Data Modem InstanceID=USB\VID_03F0&PID_261D&MI_03\3549080301127550_03
09:36:15.47 OK pressed in settingswindow
09:36:15.68 Set first swap of settings
09:36:15.70 Apply new holidays
09:36:15.70 DoItemUpdate
09:36:15.73 DoItemUpdate fertig
09:36:15.74 Holidays applied
09:36:15.75 Second swap of settings set
09:36:15.75 Everything is done
09:36:20.15 RunADBCommand: start-server
09:36:20.20 ADB CommandResponse:
09:36:20.20 RunADBCommand: devices
09:36:20.26 ADB CommandResponse: List of devices attached
09:36:20.26 Run DeviceTracker
09:36:20.26 Init Tracker
09:36:20.26 Connect to Android failed!
09:36:20.26 bOpened=False
09:36:20.26 No device attached to USB
09:36:20.26 Refresh ComDescriptions...
09:36:20.53 PORT: COM1 Enumerator=ACPI Displayed=Communications Port InstanceID=ACPI\PNP0501\5&3B281323&0
09:36:20.53 PORT: COM15 Enumerator=HP Displayed=HP hs2320 Mobile Broadband Module NMEA InstanceID=HP\GPS2\3549080301127550_09
09:36:20.54 PORT: COM3 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_3B67&SUBSYS_1521103C&REV_06\3&E89B380&0&B3
09:36:20.54 PORT: COM13 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Device Management InstanceID=USB\VID_03F0&PID_261D&MI_05\3549080301127550_05
09:36:20.54 PORT: COM14 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Device Management InstanceID=USB\VID_03F0&PID_261D&MI_08\3549080301127550_08
09:36:20.81 MODEM: COM4 Enumerator=HDAUDIO Displayed=LSI HDA Modem FriendlyName=LSI HDA Modem InstanceID=HDAUDIO\FUNC_02&VEN_11C1&DEV_1040&SUBSYS_103C3066&REV_1002\4&416FB0E&0&0101
09:36:20.81 MODEM: COM11 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Modem FriendlyName=HP hs2320 Mobile Broadband Module Modem InstanceID=USB\VID_03F0&PID_261D&MI_01\3549080301127550_01
09:36:20.81 MODEM: COM12 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Data Modem FriendlyName=HP hs2320 Mobile Broadband Module Data Modem InstanceID=USB\VID_03F0&PID_261D&MI_03\3549080301127550_03
09:36:20.82 ErrMsg: Connection to phone could not be established:
No device attached to USB
09:36:20.85 Device Tracker Message: OKAY0000
09:36:29.77 Refresh ComDescriptions...
09:36:30.04 PORT: COM1 Enumerator=ACPI Displayed=Communications Port InstanceID=ACPI\PNP0501\5&3B281323&0
09:36:30.04 PORT: COM15 Enumerator=HP Displayed=HP hs2320 Mobile Broadband Module NMEA InstanceID=HP\GPS2\3549080301127550_09
09:36:30.04 PORT: COM3 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_3B67&SUBSYS_1521103C&REV_06\3&E89B380&0&B3
09:36:30.04 PORT: COM13 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Device Management InstanceID=USB\VID_03F0&PID_261D&MI_05\3549080301127550_05
09:36:30.04 PORT: COM14 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Device Management InstanceID=USB\VID_03F0&PID_261D&MI_08\3549080301127550_08
09:36:30.31 MODEM: COM4 Enumerator=HDAUDIO Displayed=LSI HDA Modem FriendlyName=LSI HDA Modem InstanceID=HDAUDIO\FUNC_02&VEN_11C1&DEV_1040&SUBSYS_103C3066&REV_1002\4&416FB0E&0&0101
09:36:30.31 MODEM: COM11 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Modem FriendlyName=HP hs2320 Mobile Broadband Module Modem InstanceID=USB\VID_03F0&PID_261D&MI_01\3549080301127550_01
09:36:30.31 MODEM: COM12 Enumerator=USB Displayed=HP hs2320 Mobile Broadband Module Data Modem FriendlyName=HP hs2320 Mobile Broadband Module Data Modem InstanceID=USB\VID_03F0&PID_261D&MI_03\3549080301127550_03

Its no matter if it is the X10 or X10 mini pro or Xperia mini pro, they are all based on Android.

Did you read the FAQ inbetween ? Did you enable USB-Debugging on phone and did you also install the ADB-Drivers for your phone (they are included in PC Companion)?