Autor |
Nachricht |
Schamess
Anmeldedatum: 15.10.2012
Beiträge: 1
Wohnort: United States
|
Verfasst am:
Mo Okt 15, 2012 19:42 |
|
I love the idea of myphone explorer, but can't get it to recognize my phone. I've tried several times over bluetooth and over usb. It starts loading and then I get a message "phone cannot be identified" or, over usb, "phone is not connected" - even though it definitely is. The log file is attached. I'd be grateful for any assistance.
Logdatei MyPhoneExplorer
************************
Programmversion: 1.8.4
Datum: 10/15/2012
13:21:14.12 Setting Port:
13:21:14.12 Setting Baud:
13:21:14.12 Avaiable Ports: COM1=\Device\Serial1; COM3=\Device\Serial0;
13:21:14.13 Main Load frmSplash
13:21:14.13 Load frmSplash...
13:21:14.13 Show splash...
13:21:14.14 frmSplash geladen
13:21:14.55 Hauptfenster wird geladen
13:21:14.65 Sidebar fertig geladen
13:21:14.73 UC SMS wird geladen
13:21:14.75 UC Phonebook wird geladen
13:21:14.77 UC Phonebook fertig geladen
13:21:14.77 UC Calls wird geladen
13:21:14.79 UC Organizer wird geladen
13:21:14.83 Organizer initiated
13:21:14.84 Startpage=1
13:21:14.84 UC Filebrowser wird geladen
13:21:14.87 UC Filebrowser fertig geladen
13:21:14.87 UC AppBrowser wird geladen
13:21:14.88 UC Notes wird geladen
13:21:14.89 UC Calls wird geladen
13:21:14.91 Setting Lastuser:
13:21:14.91 Lade Userdatenbank:
13:21:14.92 Kontakte geladen
13:21:14.94 Anrufe geladen
13:21:14.94 Organizer LoadUser DefaultTimeColWidth=119
13:21:14.94 Organizer geladen
13:21:14.94 Notizen geladen
13:21:14.94 SMS geladen
13:21:15.15 Hauptfenster fertig geladen
13:21:15.38 Downloader: RC=6 BytesMax=5 URL=http://www.fjsoft.at/myphoneexplorer/version.txt
13:25:08.07 RunADBCommand: start-server
13:25:12.23 ADB CommandResponse: * daemon not running. starting it now on port 5037 *
* daemon started successfully *
13:25:12.23 RunADBCommand: devices
13:25:12.27 ADB CommandResponse: List of devices attached
13:25:12.27 Run DeviceTracker
13:25:12.27 Init Tracker
13:25:12.28 Device Tracker Message: OKAY0000
13:25:12.28 Connect to Android failed!
13:25:12.28 bOpened=False
13:25:12.28 No device attached to USB
13:25:12.28 Refresh ComDescriptions...
13:25:12.28 PORT: COM1 Enumerator=ACPI Displayed=Communications Port InstanceID=ACPI\PNP0501\1
13:25:12.28 PORT: COM3 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_1C3D&SUBSYS_047E1028&REV_04\3&11583659&4&B3
13:25:12.28 ErrMsg: Connection to phone could not be established:
No device attached to USB
13:25:30.70 Refresh ComDescriptions...
13:25:30.70 PORT: COM1 Enumerator=ACPI Displayed=Communications Port InstanceID=ACPI\PNP0501\1
13:25:30.71 PORT: COM3 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_1C3D&SUBSYS_047E1028&REV_04\3&11583659&4&B3
13:25:30.96 StickyNotesPath=C:\Windows\Sysnative\StikyNot.exe FileExists=True
13:25:30.97 StickyNotesTitle=Sticky Notes
13:27:33.47 OK pressed in settingswindow
13:27:33.48 Set first swap of settings
13:27:33.48 Apply new holidays
13:27:33.48 Holidays applied
13:27:33.48 Second swap of settings set
13:27:33.48 Everything is done
13:27:36.78 RunADBCommand: start-server
13:27:36.83 ADB CommandResponse:
13:27:36.83 RunADBCommand: devices
13:27:36.87 ADB CommandResponse: List of devices attached
13:27:36.87 Connect to Android failed!
13:27:36.87 bOpened=False
13:27:36.87 No device attached to USB
13:27:36.87 Refresh ComDescriptions...
13:27:36.87 PORT: COM1 Enumerator=ACPI Displayed=Communications Port InstanceID=ACPI\PNP0501\1
13:27:36.87 PORT: COM3 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_1C3D&SUBSYS_047E1028&REV_04\3&11583659&4&B3
13:27:36.87 ErrMsg: Connection to phone could not be established:
No device attached to USB
13:27:41.22 Refresh ComDescriptions...
13:27:41.22 PORT: COM1 Enumerator=ACPI Displayed=Communications Port InstanceID=ACPI\PNP0501\1
13:27:41.22 PORT: COM3 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_1C3D&SUBSYS_047E1028&REV_04\3&11583659&4&B3
13:29:20.47 OK pressed in settingswindow
13:29:20.48 Set first swap of settings
13:29:20.48 Apply new holidays
13:29:20.49 Holidays applied
13:29:20.49 Second swap of settings set
13:29:20.49 Everything is done
13:29:23.10 bOpened=False
13:29:23.10 Refresh ComDescriptions...
13:29:23.10 PORT: COM1 Enumerator=ACPI Displayed=Communications Port InstanceID=ACPI\PNP0501\1
13:29:23.10 PORT: COM3 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_1C3D&SUBSYS_047E1028&REV_04\3&11583659&4&B3
13:29:23.10 ErrMsg: Connection to phone could not be established!
13:29:32.10 bOpened=False
13:29:32.10 Refresh ComDescriptions...
13:29:32.10 PORT: COM1 Enumerator=ACPI Displayed=Communications Port InstanceID=ACPI\PNP0501\1
13:29:32.10 PORT: COM3 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_1C3D&SUBSYS_047E1028&REV_04\3&11583659&4&B3
13:29:32.10 ErrMsg: Connection to phone could not be established!
13:29:40.70 bOpened=False
13:29:40.70 Refresh ComDescriptions...
13:29:40.70 PORT: COM1 Enumerator=ACPI Displayed=Communications Port InstanceID=ACPI\PNP0501\1
13:29:40.70 PORT: COM3 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_1C3D&SUBSYS_047E1028&REV_04\3&11583659&4&B3
13:29:40.70 ErrMsg: Connection to phone could not be established!
13:29:45.45 Refresh ComDescriptions...
13:29:45.45 PORT: COM1 Enumerator=ACPI Displayed=Communications Port InstanceID=ACPI\PNP0501\1
13:29:45.45 PORT: COM3 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_1C3D&SUBSYS_047E1028&REV_04\3&11583659&4&B3
13:29:50.25 OK pressed in settingswindow
13:29:50.26 Set first swap of settings
13:29:50.26 Apply new holidays
13:29:50.26 Holidays applied
13:29:50.26 Second swap of settings set
13:29:50.26 Everything is done
13:29:54.33 Avaiable Ports: COM1=\Device\Serial1; COM3=\Device\Serial0;
13:29:54.33 Neue COM-Bibliothek wird verwendet
13:29:54.33 SPort Properties set, opening COM1
13:29:54.33 After OpenPort
13:29:54.33 Settimeout: RT=2000 WT=500
13:29:54.83 Port 1 wurde geöffnet !
13:29:54.83 bOpened=True
13:29:54.83 [TX]: AT+CGSN
13:29:56.83 Got no Model, close port
13:29:56.83 Port 1 wird geschlossen
13:29:56.93 Port wurde geschlossen
13:29:56.94 Phone could not be identified
13:29:56.94 Refresh ComDescriptions...
13:29:56.94 PORT: COM1 Enumerator=ACPI Displayed=Communications Port InstanceID=ACPI\PNP0501\1
13:29:56.94 PORT: COM3 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_1C3D&SUBSYS_047E1028&REV_04\3&11583659&4&B3
13:29:56.94 ErrMsg: Connection to phone could not be established:
Phone could not be identified
13:30:05.93 Refresh ComDescriptions...
13:30:05.93 PORT: COM1 Enumerator=ACPI Displayed=Communications Port InstanceID=ACPI\PNP0501\1
13:30:05.93 PORT: COM3 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_1C3D&SUBSYS_047E1028&REV_04\3&11583659&4&B3
13:30:11.93 OK pressed in settingswindow
13:30:11.94 Set first swap of settings
13:30:11.94 Apply new holidays
13:30:11.94 Holidays applied
13:30:11.94 Second swap of settings set
13:30:11.94 Everything is done
13:30:14.18 Avaiable Ports: COM1=\Device\Serial1; COM3=\Device\Serial0;
13:30:14.18 Neue COM-Bibliothek wird verwendet
13:30:14.18 SPort Properties set, opening COM3
13:30:14.21 After OpenPort
13:30:14.21 Settimeout: RT=2000 WT=500
13:30:14.71 Port 3 wurde geöffnet !
13:30:14.71 bOpened=True
13:30:14.71 [TX]: AT+CGSN
13:30:16.72 Got no Model, close port
13:30:16.72 Port 3 wird geschlossen
13:30:16.85 Port wurde geschlossen
13:30:16.85 Phone could not be identified
13:30:16.85 Refresh ComDescriptions...
13:30:16.85 PORT: COM1 Enumerator=ACPI Displayed=Communications Port InstanceID=ACPI\PNP0501\1
13:30:16.85 PORT: COM3 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_1C3D&SUBSYS_047E1028&REV_04\3&11583659&4&B3
13:30:16.85 ErrMsg: Connection to phone could not be established:
Phone could not be identified
13:31:42.24 Avaiable Ports: COM1=\Device\Serial1; COM3=\Device\Serial0;
13:31:42.25 Neue COM-Bibliothek wird verwendet
13:31:42.25 SPort Properties set, opening COM3
13:31:42.27 After OpenPort
13:31:42.27 Settimeout: RT=2000 WT=500
13:31:42.77 Port 3 wurde geöffnet !
13:31:42.77 bOpened=True
13:31:42.77 [TX]: AT+CGSN
13:31:44.78 Got no Model, close port
13:31:44.78 Port 3 wird geschlossen
13:31:44.91 Port wurde geschlossen
13:31:44.91 Phone could not be identified
13:31:44.91 Refresh ComDescriptions...
13:31:44.91 PORT: COM1 Enumerator=ACPI Displayed=Communications Port InstanceID=ACPI\PNP0501\1
13:31:44.91 PORT: COM3 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_1C3D&SUBSYS_047E1028&REV_04\3&11583659&4&B3
13:31:44.91 ErrMsg: Connection to phone could not be established:
Phone could not be identified
13:32:42.33 Avaiable Ports: COM1=\Device\Serial1; COM3=\Device\Serial0;
13:32:42.33 Neue COM-Bibliothek wird verwendet
13:32:42.33 SPort Properties set, opening COM3
13:32:42.36 After OpenPort
13:32:42.36 Settimeout: RT=2000 WT=500
13:32:42.86 Port 3 wurde geöffnet !
13:32:42.86 bOpened=True
13:32:42.86 [TX]: AT+CGSN
13:32:44.87 Got no Model, close port
13:32:44.87 Port 3 wird geschlossen
13:32:44.99 Port wurde geschlossen
13:32:45.00 Phone could not be identified
13:32:45.00 Refresh ComDescriptions...
13:32:45.00 PORT: COM1 Enumerator=ACPI Displayed=Communications Port InstanceID=ACPI\PNP0501\1
13:32:45.00 PORT: COM3 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_1C3D&SUBSYS_047E1028&REV_04\3&11583659&4&B3
13:32:45.00 ErrMsg: Connection to phone could not be established:
Phone could not be identified
13:32:50.28 Refresh ComDescriptions...
13:32:50.28 PORT: COM1 Enumerator=ACPI Displayed=Communications Port InstanceID=ACPI\PNP0501\1
13:32:50.28 PORT: COM3 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_1C3D&SUBSYS_047E1028&REV_04\3&11583659&4&B3
13:32:55.83 OK pressed in settingswindow
13:32:55.84 Set first swap of settings
13:32:55.84 Apply new holidays
13:32:55.84 Holidays applied
13:32:55.84 Second swap of settings set
13:32:55.84 Everything is done
13:32:58.46 Broadcaster started
13:32:58.46 Sending broadcast
13:32:58.97 Sending broadcast
13:32:59.47 Sending broadcast
13:33:00.47 Closing Broadcaster
13:33:00.47 RunADBCommand: start-server
13:33:00.52 ADB CommandResponse:
13:33:00.52 RunADBCommand: devices
13:33:00.56 ADB CommandResponse: List of devices attached
13:33:00.56 Run DeviceTracker
13:33:00.56 Init Tracker
13:33:00.56 Device Tracker Message: OKAY0000
13:33:00.56 Avaiable Ports: COM1=\Device\Serial1; COM3=\Device\Serial0;
13:33:00.56 Neue COM-Bibliothek wird verwendet
13:33:00.56 SPort Properties set, opening COM3
13:33:00.59 After OpenPort
13:33:00.59 Settimeout: RT=2000 WT=500
13:33:01.09 Port 3 wurde geöffnet !
13:33:01.09 bOpened=True
13:33:01.09 [TX]: AT+CGSN
13:33:03.10 Got no Model, close port
13:33:03.10 Port 3 wird geschlossen
13:33:03.23 Port wurde geschlossen
13:33:03.23 Phone could not be identified
13:33:03.23 Refresh ComDescriptions...
13:33:03.23 PORT: COM1 Enumerator=ACPI Displayed=Communications Port InstanceID=ACPI\PNP0501\1
13:33:03.23 PORT: COM3 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_1C3D&SUBSYS_047E1028&REV_04\3&11583659&4&B3
13:33:03.23 ErrMsg: Connection to phone could not be established:
Phone could not be identified
13:33:10.09 Refresh ComDescriptions...
13:33:10.09 PORT: COM1 Enumerator=ACPI Displayed=Communications Port InstanceID=ACPI\PNP0501\1
13:33:10.09 PORT: COM3 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_1C3D&SUBSYS_047E1028&REV_04\3&11583659&4&B3 |
_________________ A Schamess |
|
|
|
FJ
Site Admin
Anmeldedatum: 15.02.2006
Beiträge: 31492
Wohnort: Tirol
|
Verfasst am:
Di Okt 23, 2012 01:41 |
|
Read the FAQ first. If you still have no success then i will help to fix your problem |
_________________ Ich bitte um Verständnis daß ich aufgrund des hohen Aufkommens im Forum und meines zeitlichen Rahmens nichtmehr jeden Thread im Forum persönlich lesen bzw. beantworten kann.
Bitte benutzt auch die Forum-Suche bzw. die FAQ |
|
|
|
|
|
Nächstes Thema anzeigen
Vorheriges Thema anzeigen
Du kannst keine Beiträge in dieses Forum schreiben. Du kannst auf Beiträge in diesem Forum nicht antworten. Du kannst deine Beiträge in diesem Forum nicht bearbeiten. Du kannst deine Beiträge in diesem Forum nicht löschen. Du kannst an Umfragen in diesem Forum nicht mitmachen.
|
Powered by phpBB
© 2001, 2002 phpBB Group :: FI Theme ::
Alle Zeiten sind GMT + 1 Stunde
Deutsche Übersetzung von phpBB.de
| |