SMS - "Operation Failed"

Eddie Plum · Beitrag von **Eddie Plum** » Di 12. Feb 2008, 11:14

Not sure if this is due to MPE or not, but would be interested to hear opinions/ideas.

Last night, when trying to send an SMS, my phone just said "Sending Failed" almost without trying. Obviously, I restarted the phone and tried all the usual things, but then I noticed I couldn't open my inbox. Or my sent items. Or drafts. The error on screen was simply "Operation Failed".

This is the second time this has happened and the only way to solve it is a master reset, as I can't even access the messages from the memory manager.

I have seen posts on here that talk about the use of MPE resulting in phantom messages - that is, memory being used even though there are no messages occupying it. Could it be that this is confusing the phone?

Any ideas how I might go about preventing it in the future?

FYI, I have a K850, so it's dynamic memory.

Ed.

Eddie Plum · Beitrag von **Eddie Plum** » Do 27. Mär 2008, 15:49

FYI, I had not been using MPE for a while and I still got the same error last weekend. Had to do another master reset.

This proves it's not MPE that's at fault, but the K850 instead.

I have now updated the firmware vie on-line update, so will see how it fares. Otherwise, it's a bug report to SE, I think!

Ed.

Beitrag von FJ » Do 27. Mär 2008, 17:50

Thanks for this info - will help me maybe for other problems.

blutarsky · Beitrag von **blutarsky** » Fr 28. Mär 2008, 13:11

Great I have a similar problem and own a K850....
It used to send SMS steadily but now MPE is stuck and after a long timeout a dialog is shown with send failed. Behind the scene the message is really sent (and received) ...... I've tried to search ports again baud rate etc. but still the same problem.

The logfile: please note I have hidden the IMEI and receiver's phone number with som 'xxxxx'

Code: Alles auswählen

Logdatei MyPhoneExplorer
************************
Programmversion: 1.6.6
Datum:   28/03/2008


13:06:31.90       Setting Port: 18
13:06:31.90       Setting Baud: 921600
13:06:31.90       Avaiable Ports: COM3=Winachsf0; COM18=\Device\s117mdm0; COM19=\Device\s117mdm1; COM20=\Device\s117obex0; COM21=\Device\s117mgmt0; 
13:06:32.42       frmSplash geladen
13:06:33.05       Hauptfenster wird geladen
13:06:33.25       Sidebar fertig geladen
13:06:33.25       Farbschema wurde gelesen
13:06:33.31       UC SMS wird geladen
13:06:33.34       UC Phonebook wird geladen
13:06:33.35       UC Phonebook fertig geladen
13:06:33.36       UC Calls wird geladen
13:06:33.42       UC Organizer wird geladen
13:06:33.51       DoItemUpdate
13:06:33.53       DoItemUpdate fertig
13:06:33.53       Setcalendar True
13:06:33.54       expbar_Termine_caption_set
13:06:33.54       expbar_AUFGABEN_removed
13:06:33.55       Did the rest
13:06:33.57       SetCalendar OK
13:06:33.57       Organizer initiated
13:06:33.57       Startpage=1
13:06:33.57       Startpage set
13:06:33.57       UC Filebrowser wird geladen
13:06:33.58       UC Filebrowser: Images werden geladen...
13:06:33.59       UC Filebrowser: Icons Haupttoolbar geladen
13:06:33.59       UC Filebrowser: Icons Detailtoolbar geladen
13:06:33.59       UC Filebrowser: Icons PLaylisttoolbar geladen
13:06:33.59       Lade Ordnericon
13:06:33.59       Lade Laufwerkicon
13:06:33.59       Lade sonstige Icons...
13:06:33.59       Lade Treeviewicons...
13:06:33.60       UC Filebrowser: Icons Listview geladen
13:06:33.60       UC Filebrowser: Sprachdaten werden geladen...
13:06:33.61       Winpreview exists=True
13:06:33.62       UC Filebrowser fertig geladen
13:06:33.62       UC Notes wird geladen
13:06:33.63       UC Calls wird geladen
13:06:33.65       Setting Lastuser: Sony Ericsson K850 [3588740171xxxxx]
13:06:33.65       Lade Userdatenbank: Sony Ericsson K850 [3588740171xxxxx]
13:06:33.65       GMT Einstellungen geladen
13:06:33.65       InfoSMS geladen
13:06:33.66       Notizeintrag gesetzt
13:06:34.33       Kontakte geladen
13:06:34.44       DoItemUpdate
13:06:34.49       DoItemUpdate fertig
13:06:34.53       Organizer geladen
13:06:34.54       Notizen geladen
13:06:34.54       Load SMS Data...
13:06:34.54       SMS - Datenbank wird geladen...
13:06:34.54       SMS Laden  - Readfile: 0 Split: 0 Parse: 16 HandleMultiSMS: 0 Nachrichten: 28
13:06:34.56       SMS Archiv laden - Parse: 16
13:06:34.70       RefreshList (Archive): Addrows=78 Sort=16 MenuUpdate=15 Redraw=0
13:06:34.70       SMS Data Loaded...
13:06:34.70       SMS geladen
13:06:34.73       Anrufe geladen
13:06:34.81       Hauptfenster fertig geladen
13:06:35.30       Downloader: RC=6 BytesMax=5 BytesTMP=5 URL=http://www.fjsoft.at/myphoneexplorer/version.txt
13:06:36.41       Avaiable Ports: COM3=Winachsf0; COM18=\Device\s117mdm0; COM19=\Device\s117mdm1; COM20=\Device\s117obex0; COM21=\Device\s117mgmt0; 
13:06:36.41       Neue COM-Bibliothek wird verwendet
13:06:36.42       Settimeout: RT=2000 WT=200
13:06:36.92       Port 18 wurde geöffnet!
13:06:36.92 [TX]: AT+CGSN
13:06:36.94 [RX]: AT+CGSN

13:06:36.94 [RX]: 358874017108297
13:06:36.94 [RX]: OK
13:06:36.95       Settimeout: RT=15000 WT=1000
13:06:36.95 [TX]: ATI
13:06:36.95 [RX]: ATI

13:06:36.95 [RX]: Sony Ericsson K850
13:06:36.95 [RX]: OK
13:06:36.96 [TX]: AT+CSCS="UTF-8"
13:06:36.96 [RX]: AT+CSCS="UTF-8"

13:06:36.96 [RX]: OK
13:06:36.97 [TX]: ATI3
13:06:36.97 [RX]: ATI3

13:06:36.97 [RX]: Sony Ericsson Device 075 USB WMC Modem
13:06:36.97 [RX]: OK
13:06:36.98 [TX]: AT+CNMI=2,1,0,1
13:06:37.02 [RX]: AT+CNMI=2,1,0,1

13:06:37.02 [RX]: OK
13:06:37.02 [TX]: AT*ECAM=1
13:06:37.03 [RX]: AT*ECAM=1

13:06:37.03 [RX]: OK
13:06:37.04 [TX]: AT*EVH=?
13:06:37.04 [RX]: AT*EVH=?

13:06:37.04 [RX]: ERROR
13:06:37.05 [TX]: AT+CBC
13:06:37.05 [RX]: AT+CBC

13:06:37.05 [RX]: +CBC: 1, 98
13:06:37.06 [RX]: OK
13:06:37.06 [TX]: AT+CSQ
13:06:37.07 [RX]: AT+CSQ

13:06:37.07 [RX]: +CSQ: 14,99
13:06:37.07 [RX]: OK
13:06:37.07       Alle Verbindungsaktionen beendet
13:06:37.07       Suche Memorystick: C:\ D:\ E:\ F:\ H:\ L:\ M:\ W:\
13:06:37.07       Suche abgeschlossen: 
13:06:47.07       Settimeout: RT=1500 WT=800
13:06:47.07 [TX]: AT+CBC
13:06:47.10 [RX]: AT+CBC

13:06:47.10 [RX]: +CBC: 1, 98
13:06:47.10 [RX]: OK
13:06:47.10 [TX]: AT+CSQ
13:06:47.11 [RX]: AT+CSQ

13:06:47.11 [RX]: +CSQ: 16,99
13:06:47.12 [RX]: OK
13:06:53.75       Settimeout: RT=15000 WT=1000
13:06:53.76 [TX]: AT+CPMS="ME","ME"
13:06:53.86 [RX]: AT+CPMS="ME","ME"

13:06:53.86 [RX]: +CPMS: 14,11774,14,11774,14,11774
13:06:53.87 [RX]: OK
13:06:53.87       Settimeout: RT=30000 WT=1000
13:06:53.87 [TX]: AT+CMGS=16
13:06:53.89 [RX]: AT+CMGS=16

13:06:53.89 [RX]: > 
13:06:53.89 [TX]: 0011000A81335xxxxxxx0000FF0367F71F
13:07:23.90       Settimeout: RT=10000 WT=1000
13:07:27.15       Settimeout: RT=1500 WT=800
13:07:27.15 [TX]: AT+CBC
13:07:28.66       Port 18 wird geschlossen

Beitrag von FJ » Fr 28. Mär 2008, 14:05

MyPhoneExplorer waits 30 seconds for an answer from the phone. If MPE gets no answer he throws an error. It happens also with "Stable connection" ?

blutarsky · Beitrag von **blutarsky** » Fr 28. Mär 2008, 15:43

I will try, but it used to work, why all of a sudden it doesn't work.....

blutarsky · Beitrag von **blutarsky** » Mo 7. Apr 2008, 14:13

The problem doesn't occur with bluetooth connection, but only with serial cable....

weinbi · Beitrag von **weinbi** » Mo 7. Apr 2008, 17:37

If you want to use USB-Cable, you can try to re-install the drivers...