FJ Software

Hi FJ,
I am using SE G700.. I had downloaded drivers and MPE 1.7.0 mentioned by you in this topic... http://www.fjsoft.at/forum/viewtopic.php?t=9094

After removing the PC Suite and MPE 1.7.4, I installed the drivers and MPE 1.7.0.... I am unable to sync my phonebook, notes, appointments... Calls, Messages are syncing properly...

While initiating sync with phonebook, notes.. I get the following error:

Could not load Symbian-Connect-Runtime.!
Please note Sony PC Suite must be installed so that phoneexplorer is able to communicate with Symbian phones.

Do I need to install mrouter for connectivity..? or there is something missing.!

I do not want to install PC-Suite.. hence this way of connecting via USB Cable...only.

Cool-Indian

Please find the log file for further reference

Logdatei MyPhoneExplorer
************************
Programmversion: 1.7.0
Datum: 2/4/2010

23:34:49.78 Setting Port: 6
23:34:49.79 Setting Baud: 921600
23:34:49.82 Avaiable Ports: COM4=\Device\QCUSB_COM4_1; COM5=\Device\QCUSB_COM5_2; COM9=\Device\BtPort0; COM10=\Device\BtPort1; COM11=\Device\BtPort2; COM12=\Device\AgereModem5;
23:34:51.31 frmSplash geladen
23:34:52.70 Hauptfenster wird geladen
23:34:53.12 Sidebar fertig geladen
23:34:53.17 Farbschema wurde gelesen
23:34:53.31 UC SMS wird geladen
23:34:53.38 UC Phonebook wird geladen
23:34:53.42 UC Phonebook fertig geladen
23:34:53.42 UC Calls wird geladen
23:34:53.51 UC Organizer wird geladen
23:34:53.82 Organizer initiated
23:34:53.82 Startpage=3
23:34:53.84 Startpage set
23:34:53.85 UC Filebrowser wird geladen
23:34:53.90 UC Filebrowser: Images werden geladen...
23:34:53.92 UC Filebrowser: Icons Haupttoolbar geladen
23:34:53.96 UC Filebrowser: Icons Detailtoolbar geladen
23:34:53.96 UC Filebrowser: Icons PLaylisttoolbar geladen
23:34:53.96 Lade Ordnericon
23:34:53.96 Lade Laufwerkicon
23:34:53.96 Lade sonstige Icons...
23:34:53.96 Lade Treeviewicons...
23:34:53.96 UC Filebrowser: Icons Listview geladen
23:34:53.96 UC Filebrowser: Sprachdaten werden geladen...
23:34:53.98 Winpreview exists=True
23:34:54.00 UC Filebrowser fertig geladen
23:34:54.00 UC Notes wird geladen
23:34:54.01 UC Calls wird geladen
23:34:54.10 Avaiable Ports: COM4=\Device\QCUSB_COM4_1; COM5=\Device\QCUSB_COM5_2; COM9=\Device\BtPort0; COM10=\Device\BtPort1; COM11=\Device\BtPort2; COM12=\Device\AgereModem5;
23:34:54.10 Neue COM-Bibliothek wird verwendet
23:34:54.18 SPort Properties set, opening Port...
23:34:54.18 After OpenPort
23:34:54.18 ErrMsg: Could not open COM6!
23:34:56.17 Setting Lastuser:
23:34:56.17 Lade Userdatenbank:
23:34:56.17 GMT Einstellungen geladen
23:34:56.17 InfoSMS geladen
23:34:56.23 Notizeintrag gesetzt
23:34:56.25 Kontakte geladen
23:34:56.25 Organizer geladen
23:34:56.25 Notizen geladen
23:34:56.25 SMS geladen
23:34:56.25 Anrufe geladen
23:34:56.29 Hauptfenster fertig geladen
23:34:57.98 Avaiable Ports: COM4=\Device\QCUSB_COM4_1; COM5=\Device\QCUSB_COM5_2; COM9=\Device\BtPort0; COM10=\Device\BtPort1; COM11=\Device\BtPort2; COM12=\Device\AgereModem5;
23:34:57.98 Neue COM-Bibliothek wird verwendet
23:34:57.98 SPort Properties set, opening Port...
23:34:57.98 After OpenPort
23:34:57.98 ErrMsg: Could not open COM6!
23:35:10.76 Avaiable Ports: COM4=\Device\QCUSB_COM4_1; COM5=\Device\QCUSB_COM5_2; COM9=\Device\BtPort0; COM10=\Device\BtPort1; COM11=\Device\BtPort2; COM12=\Device\AgereModem5;
23:35:10.76 Neue COM-Bibliothek wird verwendet
23:35:10.76 SPort Properties set, opening Port...
23:35:10.76 After OpenPort
23:35:10.76 ErrMsg: Could not open COM6!
23:35:17.23 Port 4 wird geöffnet...
23:35:17.32 Einstellungen werden gesetzt (9600, N, 8, 1)
23:35:17.32 Puffer werden gesetzt...(8192)
23:35:17.32 Settimeout: RT=2000 WT=200
23:35:17.82 Port 4 wurde geöffnet !
23:35:17.82 Settimeout: RT=2000 WT=500
23:35:17.82 [TX]: AT+CBC
23:35:17.84 [RX]: AT+CBC
23:35:17.84 [RX]: ERROR
23:35:17.84 Port 4 wird geschlossen
23:35:17.85 Port 5 wird geöffnet...
23:35:17.85 Einstellungen werden gesetzt (9600, N, 8, 1)
23:35:17.85 Puffer werden gesetzt...(8192)
23:35:17.85 Settimeout: RT=2000 WT=200
23:35:18.35 Port 5 wurde geöffnet !
23:35:18.35 Settimeout: RT=2000 WT=500
23:35:18.35 [TX]: AT+CBC
23:35:20.37 ReadFile Fehler: Systemerror: 0 [The operation completed successfully.]
23:35:20.37 Port 5 wird geschlossen
23:35:20.38 Port 9 wird geöffnet...
23:35:20.38 Einstellungen werden gesetzt (9600, N, 8, 1)
23:35:20.38 Puffer werden gesetzt...(8192)
23:35:20.38 Settimeout: RT=2000 WT=200
23:35:20.88 Port 9 wurde geöffnet !
23:35:20.88 Settimeout: RT=2000 WT=500
23:35:20.88 [TX]: AT+CBC
23:35:22.90 ReadFile Fehler: Systemerror: 0 [The operation completed successfully.]
23:35:22.90 Port 9 wird geschlossen
23:35:22.90 Port 10 wird geöffnet...
23:35:22.90 Einstellungen werden gesetzt (9600, N, 8, 1)
23:35:22.90 Puffer werden gesetzt...(8192)
23:35:22.90 Settimeout: RT=2000 WT=200
23:35:23.40 Port 10 wurde geöffnet !
23:35:23.42 Settimeout: RT=2000 WT=500
23:35:23.42 [TX]: AT+CBC
23:35:25.42 ReadFile Fehler: Systemerror: 0 [The operation completed successfully.]
23:35:25.43 Port 10 wird geschlossen
23:35:25.43 Port 11 wird geöffnet...
23:35:25.43 Einstellungen werden gesetzt (9600, N, 8, 1)
23:35:25.43 Puffer werden gesetzt...(8192)
23:35:25.43 Settimeout: RT=2000 WT=200
23:35:25.93 Port 11 wurde geöffnet !
23:35:25.93 Settimeout: RT=2000 WT=500
23:35:25.93 [TX]: AT+CBC
23:35:27.95 ReadFile Fehler: Systemerror: 0 [The operation completed successfully.]
23:35:27.95 Port 11 wird geschlossen
23:35:27.96 Port 12 wird geöffnet...
23:35:28.38 Einstellungen werden gesetzt (9600, N, 8, 1)
23:35:28.38 Puffer werden gesetzt...(8192)
23:35:28.38 Settimeout: RT=2000 WT=200
23:35:28.88 Port 12 wurde geöffnet !
23:35:28.88 Settimeout: RT=2000 WT=500
23:35:28.88 [TX]: AT+CBC
23:35:28.90 [RX]: AT+CBC
23:35:28.90 [RX]: ERROR
23:35:28.90 Port 12 wird geschlossen
23:35:54.40 COM6..
23:35:57.53 COM7.«
23:35:57.54 OK pressed in settingswindow
23:35:57.57 Set first swap of settings
23:35:57.59 Apply new holidays
23:35:57.59 DoItemUpdate
23:35:57.63 DoItemUpdate fertig
23:35:57.65 Holidays applied
23:35:57.65 Second swap of settings set
23:35:57.65 Everything is done
23:36:00.48 COM8.Ì
23:36:14.29 Avaiable Ports: COM4=\Device\QCUSB_COM4_1; COM5=\Device\QCUSB_COM5_2; COM6=\Device\zebrmdm0; COM7=\Device\zebrmdm1; COM8=\Device\zebrsce0; COM9=\Device\BtPort0; COM10=\Device\BtPort1; COM11=\Device\BtPort2; COM12=\Device\AgereModem5;
23:36:14.29 Neue COM-Bibliothek wird verwendet
23:36:14.29 SPort Properties set, opening Port...
23:36:14.29 After OpenPort
23:36:14.29 Settimeout: RT=2000 WT=200
23:36:14.79 Port 6 wurde geöffnet !
23:36:14.81 [TX]: AT+CGSN
23:36:14.87 [RX]: AT+CGSN

23:36:14.87 [RX]: 353887020992684
23:36:14.88 [RX]: OK
23:36:14.88 Settimeout: RT=15000 WT=1000
23:36:14.88 [TX]: ATI
23:36:14.93 [RX]: ATI

23:36:14.93 [RX]: Sony Ericsson G700
23:36:14.93 [RX]: OK
23:36:14.95 [TX]: AT+CSCS="UTF-8"
23:36:15.00 [RX]: AT+CSCS="UTF-8"

23:36:15.00 [RX]: OK
23:36:15.00 [TX]: ATI3
23:36:15.04 [RX]: ATI3

23:36:15.04 [RX]: Sony Ericsson USB WMC Modem
23:36:15.04 [RX]: OK
23:36:15.04 [TX]: AT+CNMI=2,1,0,1
23:36:15.10 [RX]: AT+CNMI=2,1,0,1

23:36:15.10 [RX]: OK
23:36:15.10 [TX]: AT*ECAM=1
23:36:15.15 [RX]: AT*ECAM=1

23:36:15.15 [RX]: OK
23:36:15.17 [TX]: AT*EVH=?
23:36:15.23 [RX]: AT*EVH=?

23:36:15.23 [RX]: ERROR
23:36:15.25 [TX]: AT+CBC
23:36:15.29 [RX]: AT+CBC

23:36:15.29 [RX]: +CBC: 1, 60
23:36:15.31 [RX]: OK
23:36:15.31 [TX]: AT+CSQ
23:36:15.35 [RX]: AT+CSQ

23:36:15.35 [RX]: +CSQ: 20,99
23:36:15.37 [RX]: OK
23:36:15.37 Alle Verbindungsaktionen beendet
23:36:15.37 [TX]: AT+CSCA?
23:36:15.75 [RX]: AT+CSCA?

23:36:15.75 [RX]: +CSCA: "919820005444",145
23:36:15.79 [RX]: OK
23:36:15.81 DoItemUpdate
23:36:15.84 DoItemUpdate fertig
23:36:20.57 Lade Userdatenbank: Sony Ericsson G700 [353887020992684]
23:36:20.57 GMT Einstellungen geladen
23:36:20.57 InfoSMS geladen
23:36:20.67 Notizeintrag gesetzt
23:36:20.68 Kontakte geladen
23:36:20.70 DoItemUpdate
23:36:20.71 DoItemUpdate fertig
23:36:20.71 Organizer geladen
23:36:20.71 Notizen geladen
23:36:20.71 Load SMS Data...
23:36:20.76 RefreshList (Archive): Addrows=0 Sort=0 MenuUpdate=0 Redraw=0
23:36:20.76 SMS Data Loaded...
23:36:20.76 SMS geladen
23:36:20.76 Anrufe geladen
23:36:20.76 Suche Memorystick: C:\ D:\
23:36:20.76 Suche abgeschlossen:
23:36:20.84 [TX]: AT+CBC
23:36:21.81 [RX]: AT+CBC

23:36:21.81 [RX]: +CBC: 1, 60
23:36:21.81 [RX]: OK
23:36:21.85 [TX]: AT*ECAM=0
23:36:21.92 [RX]: AT*ECAM=0

23:36:21.92 [RX]: OK
23:36:21.92 [TX]: AT+CCLK?
23:36:22.00 [RX]: AT+CCLK?

23:36:22.00 [RX]: +CCLK: "10/02/04,23:36:29+22"
23:36:22.04 [RX]: OK
23:36:22.04 [TX]: AT+CSCA?
23:36:22.35 [RX]: AT+CSCA?

23:36:22.35 [RX]: +CSCA: "919820005444",145
23:36:22.38 [RX]: OK
23:36:22.40 ErrMsg: Could not load Symbian-Connect-Runtime!
Please note that the SonyEricsson PC-Suite must be installed so that MyPhoneExplorer is able to communicate with Symbian phones.
23:36:22.82 fSync_Timer3: Form.Visible=True
23:36:30.34 ErrMsg: Could not load Symbian-Connect-Runtime!
Please note that the SonyEricsson PC-Suite must be installed so that MyPhoneExplorer is able to communicate with Symbian phones.
23:36:31.01 ErrMsg: Could not load Symbian-Connect-Runtime!
Please note that the SonyEricsson PC-Suite must be installed so that MyPhoneExplorer is able to communicate with Symbian phones.
23:36:31.46 [TX]: AT+CSCA?
23:36:31.81 [RX]: AT+CSCA?

23:36:31.81 [RX]: +CSCA: "919820005444",145
23:36:31.84 [RX]: OK
23:36:31.84 [TX]: AT+CPBS="SM"
23:36:31.92 [RX]: AT+CPBS="SM"

23:36:31.92 [RX]: OK
23:36:31.92 [TX]: AT+CPBR=?
23:36:32.00 [RX]: AT+CPBR=?

23:36:32.00 [RX]: +CPBR: (1-250),100,14
23:36:32.03 [RX]: OK
23:36:32.03 [TX]: AT+CPBR=1,250
23:36:32.18 [RX]: AT+CPBR=1,250

23:36:32.18 [RX]: +CPBR: 11,"111",129,"Vodafone Care"
23:36:32.25 [RX]: OK
23:36:32.29 [TX]: AT+CPBS="DC"
23:36:32.37 [RX]: AT+CPBS="DC"

23:36:32.37 [RX]: OK
23:36:32.37 [TX]: AT+CPBR=1,30
23:36:32.46 [RX]: AT+CPBR=1,30

For Symbian-Phones its also needed to install the PC-Suite (as shown in the Error-message)