FAQ updated! Now containing Information about Bluetooth
Huawei Ideos X3
Huawei Ideos X3 worked fine with WIN XP SP 3 via bluetooth and with WIN7 via USB. I did not try bluetooth under WIN7, because USB worked fine
-
PadFoneUser
- Beiträge: 3
- Registriert: Sa 21. Jul 2012, 01:30
Asus Padfone with ICS 4.0.3 to Win XPSP3 desktops: no-name BT adapters, WinXP native and BlueSoleil BT stacks. Works well under both.
No connection issues except BluSoleil had to be forced to "discover" serial ports under device properties after pairing.
Ongoing connects/disconnects without an issue, although minor issue on handset of MPE not automaticlly starting when a paired BT machine is detected.
No problems connecting via WiFi in either case.
No connection issues except BluSoleil had to be forced to "discover" serial ports under device properties after pairing.
Ongoing connects/disconnects without an issue, although minor issue on handset of MPE not automaticlly starting when a paired BT machine is detected.
No problems connecting via WiFi in either case.
-
shurick930
- Beiträge: 1
- Registriert: Mi 1. Mai 2013, 09:43
-
PaoloZP980
- Beiträge: 4
- Registriert: Mo 30. Dez 2013, 12:51
You tried also to make a new pairing between phone and PC ? Are you sure that MyPhoneExplorer Client was launched when you paired your phone the first time ?
Ich bitte um Verständnis daß ich aufgrund des hohen Aufkommens im Forum und meines zeitlichen Rahmens nichtmehr jeden Thread im Forum persönlich lesen bzw. beantworten kann.
Bitte benutzt auch die Forum-Suche bzw. die FAQ
Bitte benutzt auch die Forum-Suche bzw. die FAQ
-
PaoloZP980
- Beiträge: 4
- Registriert: Mo 30. Dez 2013, 12:51
sure i deleted old MPE profile and i did a new oneFJ hat geschrieben:You tried also to make a new pairing between phone and PC ? Are you sure that MyPhoneExplorer Client was launched when you paired your phone the first time ?
i connected and verified that pc and smartphone were connected but MPE bluetooth connection didn't work
note that when pc and zp980 connect, launching MPE on pc, the MPE client on smartphone doesn't start
any suggestion?
-
PaoloZP980
- Beiträge: 4
- Registriert: Mo 30. Dez 2013, 12:51
hi all anyone can help me? i still have this problem...PaoloZP980 hat geschrieben:sure i deleted old MPE profile and i did a new oneFJ hat geschrieben:You tried also to make a new pairing between phone and PC ? Are you sure that MyPhoneExplorer Client was launched when you paired your phone the first time ?
i connected and verified that pc and smartphone were connected but MPE bluetooth connection didn't work
note that when pc and zp980 connect, launching MPE on pc, the MPE client on smartphone doesn't start
any suggestion?
thank you
-
user_deleted
For the very first connection it is important to keep the right sequence:
- start MPE client manually on your phone first, because the client provides the SPP (Serial Port Profile) service, which is needed to create a virtual COM port later
- enable bluetooth on your devices and be sure they are visible to be found
- do the pairing
- verify that SPP is supported, you can verify by showing bluetooth services (MyPhoneExplorer should be listed in service list).
- when pairing is done, you should be able now to create a new outgoing virtual COM port inside your bluetooth software
- remember that COM port
- start MPE Desktop on your computer, goto settings and select that COM port created before
If all went well, you should be able to connect now.
best regards...
- start MPE client manually on your phone first, because the client provides the SPP (Serial Port Profile) service, which is needed to create a virtual COM port later
- enable bluetooth on your devices and be sure they are visible to be found
- do the pairing
- verify that SPP is supported, you can verify by showing bluetooth services (MyPhoneExplorer should be listed in service list).
- when pairing is done, you should be able now to create a new outgoing virtual COM port inside your bluetooth software
- remember that COM port
- start MPE Desktop on your computer, goto settings and select that COM port created before
If all went well, you should be able to connect now.
best regards...
-
PaoloZP980
- Beiträge: 4
- Registriert: Mo 30. Dez 2013, 12:51
BT connection with Zopo 980
Thank you Mr Deauville!!!!
You solved me an enormous problem!!!!!
I did all the spteps but i didn't ever verify SPP support!!!!!
i checked that box in the service list and it begins to work!!!!
thank you so much!!!!

You solved me an enormous problem!!!!!
I did all the spteps but i didn't ever verify SPP support!!!!!
i checked that box in the service list and it begins to work!!!!
thank you so much!!!!
I am glad to inform that my Zopo ZP998 running Android 4.4.2 version (Kitkat) works well in Bluetooth mode with MyPhoneExplorer.
Remember to follow exactly the steps mentioned in the FAQ, otherwise in Options of MPE client in the PC, the corresponding COM witll not be found (for example if you paired the devices before starting MPE application in the phone, it will not work). Once the right port with the name of the phone is shown and selected inside the combo-box, the connection with the phone is successful !
Remember to follow exactly the steps mentioned in the FAQ, otherwise in Options of MPE client in the PC, the corresponding COM witll not be found (for example if you paired the devices before starting MPE application in the phone, it will not work). Once the right port with the name of the phone is shown and selected inside the combo-box, the connection with the phone is successful !
-
Robbie Kleij
- Beiträge: 1
- Registriert: So 1. Mai 2016, 03:58
- Wohnort: New Zealand
- Kontaktdaten:
HTC sensation Z710a
my HTC works perfectly on Windows 10 ( an upgrade from win-7 )
Bluetooth - yes
USB - yes
control phone/ load screen shot - yes
Mouse on Phone screen - works in all areas
phone calls received play though connected speakers
e.g 2XXPlantronic - earphone/mic, (alternately HTC speakers mic)
incoming call ringing plays though computer speakers as well as phone.
would be nice if the computer speakers and mic could be used
possible solution is to use input/output line "HTC to PC"
all good here .. I'm using MPE 1.8.7
Bluetooth - yes
USB - yes
control phone/ load screen shot - yes
Mouse on Phone screen - works in all areas
phone calls received play though connected speakers
e.g 2XXPlantronic - earphone/mic, (alternately HTC speakers mic)
incoming call ringing plays though computer speakers as well as phone.
would be nice if the computer speakers and mic could be used
possible solution is to use input/output line "HTC to PC"
all good here .. I'm using MPE 1.8.7
accentuate the positive when it's the positive we really need
MPE freezes then crashes during bluetooth file sync
- Phone Samsung Galaxy SM-T580
- Bluetooth connection
- MPE-version 1.8.8
- Windows version: Windows 7 enterprise
- firmware version: not sure where I find this?
Hi there,
I have successfully been using MPE via wifi for while but for a couple of reason I now need to use it with via a bluetooth connection. It will connect with no problems but when syncing files (this is all I use it for) it will start the sync process and during the stage of 'calculating needed file transfer...) it it will freeze and then crash.
Due to the crashing there is nothing reported in the log file but the windows error that is displayed is:
Problem signature:
Problem Event Name: APPCRASH
Application Name: MyPhoneExplorer.exe
Application Version: 1.8.0.8
Application Timestamp: 586f6dc5
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7601.24094
Fault Module Timestamp: 5abee073
Exception Code: c000008f
Exception Offset: 0000c54f
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 2057
Additional Information 1: 6691
Additional Information 2: 6691496a2e1d87762609789fb3c9732d
Additional Information 3: d5a4
Additional Information 4: d5a48916e03f12d1b9320ff814b5eef7
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid= ... cid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Any help would be really appreciated,
Thanks,
Mark
- Bluetooth connection
- MPE-version 1.8.8
- Windows version: Windows 7 enterprise
- firmware version: not sure where I find this?
Hi there,
I have successfully been using MPE via wifi for while but for a couple of reason I now need to use it with via a bluetooth connection. It will connect with no problems but when syncing files (this is all I use it for) it will start the sync process and during the stage of 'calculating needed file transfer...) it it will freeze and then crash.
Due to the crashing there is nothing reported in the log file but the windows error that is displayed is:
Problem signature:
Problem Event Name: APPCRASH
Application Name: MyPhoneExplorer.exe
Application Version: 1.8.0.8
Application Timestamp: 586f6dc5
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7601.24094
Fault Module Timestamp: 5abee073
Exception Code: c000008f
Exception Offset: 0000c54f
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 2057
Additional Information 1: 6691
Additional Information 2: 6691496a2e1d87762609789fb3c9732d
Additional Information 3: d5a4
Additional Information 4: d5a48916e03f12d1b9320ff814b5eef7
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid= ... cid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Any help would be really appreciated,
Thanks,
Mark