Issue with outlook 2010 64 bit

Anmeldedatum: 22.02.2011 Beiträge: 4

Hi,

Thanks for a great software Smile

I have an issue after installing Windows 7 (x64), Outlook 2010 (x64) and MPE.
I can't sync with Outlook other than Outlook is open. Crying or Very sad

When Outlook is open there is no issue, and it sync as it should.
But when its close, MPE can't connect to Outlook. Rolling Eyes

Can you out of the log file see whats wrong?

I have attached the log file below.

Best regards
Mads

Logdatei MyPhoneExplorer
************************
Programmversion: 1.8.0
Datum: 22-02-2011

00:37:02.13 Setting Port: 8
00:37:02.13 Setting Baud: 57600
00:37:02.13 Avaiable Ports: COM1=\Device\Serial0; COM7=\Device\BthModem1; COM8=\Device\BthModem0; COM9=\Device\BthModem2;
00:37:02.13 Main Load frmSplash
00:37:02.13 Load frmSplash...
00:37:02.36 Hauptfenster wird geladen
00:37:02.52 Sidebar fertig geladen
00:37:05.50 UC SMS wird geladen
00:37:05.55 UC Phonebook wird geladen
00:37:05.57 UC Phonebook fertig geladen
00:37:05.57 UC Calls wird geladen
00:37:05.58 UC Organizer wird geladen
00:37:05.65 Organizer initiated
00:37:05.65 Startpage=1
00:37:05.66 UC Filebrowser wird geladen
00:37:05.71 UC Filebrowser fertig geladen
00:37:05.71 UC AppBrowser wird geladen
00:37:05.71 UC Notes wird geladen
00:37:05.71 UC Calls wird geladen
00:37:05.77 Avaiable Ports: COM1=\Device\Serial0; COM7=\Device\BthModem1; COM8=\Device\BthModem0; COM9=\Device\BthModem2;
00:37:05.77 Neue COM-Bibliothek wird verwendet
00:37:05.77 SPort Properties set, opening COM8
00:37:07.97 After OpenPort
00:37:07.97 Settimeout: RT=2000 WT=500
00:37:08.47 Port 8 wurde geöffnet !
00:37:08.97 bOpened=True
00:37:08.99 [TX]: AT+CGSN
00:37:09.08 [RX]: AT+CGSN

00:37:09.08 [RX]: 356810030584041
00:37:09.08 [RX]: OK
00:37:09.08 Settimeout: RT=15000 WT=1000
00:37:09.08 [TX]: ATI
00:37:09.13 [RX]: ATI

00:37:09.13 [RX]: Sony Ericsson U1i
00:37:09.13 [RX]: OK
00:37:09.13 [TX]: AT+CSCS="UTF-8"
00:37:09.18 [RX]: AT+CSCS="UTF-8"

00:37:09.18 [RX]: OK
00:37:09.18 [TX]: ATI3
00:37:09.21 [RX]: ATI3

00:37:09.21 [RX]: Sony Ericsson Serial Modem
00:37:09.21 [RX]: OK
00:37:09.21 [TX]: AT+CNMI=2,1,0,1
00:37:09.27 [RX]: AT+CNMI=2,1,0,1

00:37:09.27 [RX]: OK
00:37:09.27 [TX]: AT*ECAM=1
00:37:09.32 [RX]: AT*ECAM=1

00:37:09.32 [RX]: OK
00:37:09.32 [TX]: AT+CIND=?
00:37:09.41 [RX]: AT+CIND=?

00:37:09.41 [RX]: +CIND: ("service",(0-1)),("call",(0-1)),("callsetup",(0-3)),("callheld",(0-2)),("signal",(0-5)),("roam",(0-1)),("battchg",(0-5)),("batterywarning",(0-1)),("chargerconnected",(0-1)),("message",(0-1))
00:37:09.43 [RX]: OK
00:37:09.43 [TX]: AT+CBC
00:37:09.49 [RX]: AT+CBC

00:37:09.49 [RX]: +CBC: 0,52
00:37:09.49 [RX]: OK
00:37:09.49 [TX]: AT+CIND?
00:37:09.57 [RX]: AT+CIND?

00:37:09.57 [RX]: +CIND: 1,0,0,0,5,0,3,0,0,0
00:37:09.58 [RX]: OK
00:37:09.58 Alle Verbindungsaktionen beendet
00:37:09.58 [TX]: AT+CSCA?
00:37:09.65 [RX]: AT+CSCA?

00:37:09.65 [RX]: +CSCA: "+4540590000",145
00:37:09.68 [RX]: OK
00:37:09.69 Lade Userdatenbank: Sony Ericsson U1i [356810030584041]
00:37:09.72 LoadDatafile: Phonebook.dat(9327 Bytes)
00:37:09.75 LoadDatafile: SimPhoneBook.dat(41 Bytes)
00:37:09.75 Kontakte geladen
00:37:09.75 LoadDatafile: Calls.dat(5278 Bytes)
00:37:09.83 Anrufe geladen
00:37:09.83 LoadDatafile: Organizer.dat(10754 Bytes)
00:37:09.85 DoItemUpdate
00:37:09.86 DoItemUpdate fertig
00:37:09.88 Organizer geladen
00:37:09.88 Notizen geladen
00:37:09.88 Load SMS Data...
00:37:09.88 LoadDatafile: SMS.dat(114 Bytes)
00:37:09.88 SMS - Datenbank wird geladen...
00:37:09.88 SMS Laden - Readfile: 0 Split: 0 Parse: 0 HandleMultiSMS: 0 Nachrichten: 2
00:37:09.90 LoadDatafile: SMSArchive.dat(112447 Bytes)
00:37:09.91 SMS Archiv laden - Parse: 31
00:37:09.94 RefreshList (Archive): Addrows=32 Sort=0 MenuUpdate=0 Redraw=0
00:37:09.94 SMS Data Loaded...
00:37:09.94 SMS geladen
00:37:10.05 Hauptfenster fertig geladen
00:37:10.15 Downloader: RC=6 BytesMax=5 URL=http://www.fjsoft.at/myphoneexplorer/version.txt
00:37:12.10 [TX]: AT+CBC
00:37:12.24 [RX]: AT+CBC

00:37:12.24 [RX]: +CBC: 0,52
00:37:12.24 [RX]: OK
00:37:12.30 Form_Activate fSync Operation=2
00:37:12.30 [TX]: AT*ECAM=0
00:37:12.38 [RX]: AT*ECAM=0

00:37:12.38 [RX]: OK
00:37:12.38 [TX]: AT+CSIL?
00:37:12.63 [RX]: AT+CSIL?

00:37:12.63 [RX]: +CSIL: 0
00:37:12.63 [RX]: OK
00:37:12.63 [TX]: AT+CSIL=1
00:37:12.82 [RX]: AT+CSIL=1

00:37:12.82 [RX]: OK
00:37:12.82 [TX]: AT+CCLK?
00:37:13.00 [RX]: AT+CCLK?

00:37:13.00 [RX]: +CCLK: "11/02/22,00:37:10+04"
00:37:13.02 [RX]: OK
00:37:13.02 [TX]: AT*EDST?
00:37:13.24 [RX]: AT*EDST?

00:37:13.24 [RX]: *EDST: 0
00:37:13.27 [RX]: OK
00:37:13.27 [TX]: AT+CSCA?
00:37:13.40 [RX]: AT+CSCA?

00:37:13.40 [RX]: +CSCA: "+4540590000",145
00:37:13.43 [RX]: OK
00:37:13.44 OL Initapplication...
00:37:13.46 Error in LoadApplication (cOutlook, Outlook.Application) : 429 ActiveX component can't create object
00:37:13.46 Error in LoadApplication (cOutlook, Outlook.Application.14) : 429 ActiveX component can't create object
00:37:13.46 Error in LoadApplication (cOutlook, Outlook.Application.12) : 463 Class not registered on local machine
00:37:13.46 Error in LoadApplication (cOutlook, Outlook.Application.11) : 463 Class not registered on local machine
00:37:13.46 Error in LoadApplication (cOutlook, Outlook.Application.10) : 463 Class not registered on local machine
00:37:13.46 ErrMsg: Forbindelse til Outlook mislykkedes.
00:37:15.75 SaveDatafile: Phonebook.dat (9327 Bytes)
00:37:15.78 [TX]: AT*ECAM=1
00:37:15.84 [RX]: AT*ECAM=1

00:37:15.84 [RX]: OK
00:37:19.95 Settimeout: RT=1500 WT=800
00:37:19.95 [TX]: AT+CBC
00:37:20.01 [RX]: AT+CBC

00:37:20.01 [RX]: +CBC: 0,52
00:37:20.01 [RX]: OK
00:37:20.01 [TX]: AT+CIND?
00:37:20.11 [RX]: AT+CIND?

00:37:20.11 [RX]: +CIND: 1,0,0,0,5,0,3,0,0,0
00:37:20.14 [RX]: OK
00:37:20.84 Settimeout: RT=15000 WT=1000
00:37:20.84 [TX]: AT+CSIL=0
00:37:21.14 [RX]: AT+CSIL=0

00:37:21.14 [RX]: OK
00:37:25.48 Refresh ComDescriptions...
00:37:25.48 PORT: COM9 Enumerator=BTHENUM Displayed=Standard seriel forbindelse via Bluetooth InstanceID=BTHENUM\{00001101-0000-1000-8000-00805F9B34FB}_LOCALMFG&0000\9&20B9D465&0&000000000000_00000000
00:37:25.48 PORT: COM8 Enumerator=BTHENUM Displayed='Mads Satio' Bluetooth-Port InstanceID=BTHENUM\{00001101-0000-1000-8000-00805F9B34FB}_VID&00010001_PID&001E\9&20B9D465&0&6C0E0D442DA8_C00000000
00:37:25.48 PORT: COM1 Enumerator=ACPI Displayed=Kommunikationsport InstanceID=ACPI\PNP0501\1
00:37:25.48 MODEM: COM7 Enumerator=BTHENUM LocationInfo= FriendlyName=Standardmodem over Bluetooth-kæde InstanceID=BTHENUM\{00001103-0000-1000-8000-00805F9B34FB}_VID&00010001_PID&001E\9&20B9D465&0&6C0E0D442DA8_C00000000
00:37:25.84 StickyNotesPath=C:\Windows\Sysnative\StikyNot.exe FileExists=True
00:37:25.84 StickyNotesTitle=Sticky Notes
00:37:30.15 Settimeout: RT=1500 WT=800
00:37:30.15 [TX]: AT+CBC
00:37:30.20 [RX]: AT+CBC

00:37:30.20 [RX]: +CBC: 0,52
00:37:30.20 [RX]: OK
00:37:30.20 [TX]: AT+CIND?
00:37:30.31 [RX]: AT+CIND?

00:37:30.31 [RX]: +CIND: 1,0,0,0,5,0,3,0,0,0
00:37:30.31 [RX]: OK

Verfasst am: Mi Feb 23, 2011 00:01

This problem is related to Outlook and not to MyPhoneExplorer. Maybe Office-CD with choice "Repair" will fix the problem

Anmeldedatum: 22.02.2011 Beiträge: 4

FJ hat Folgendes geschrieben:

This problem is related to Outlook and not to MyPhoneExplorer. Maybe Office-CD with choice "Repair" will fix the problem

Thank you for your reply.

I will try that and report back here if others have same issue.

Best regards
Mads

Anmeldedatum: 22.02.2011 Beiträge: 4

It had no effect on my issue to run a Office 2010 repair.
Some of my applications have the same issue with Outlook 2010 64 as MPE 1.8 has, they can't "open" Outlook.

But I have also applications that runs just fine with Office 2010 64 bit.
My backup application for example, there is no issue when it connect to a closed Outlook.

But bottom line of my setup is, that MPE 1.8 can't connect to my Outlook 2010 64bit on my windows 7 64 bit system.

Verfasst am: Sa Feb 26, 2011 15:42

It depends on the technique which is used to connect to Outlook. MyPhoneExplorer uses ActiveX. Maybe it helps to enable the "Developer Ribbon" in Outlook. I heart from a user that this helped, please test

Anmeldedatum: 22.02.2011 Beiträge: 4

I have now try to enable the "developer Ribbon" in Outlook, without any luck.

I can see that MyPhoneExplorer_Outlookaddin.Connect is disabled in Outlook, and I can't get it to be enbaled.
It won't startup because it says that it fails on startup

Best regrads
Mads

Informationen zum Datenschutz auf dieser Website