failure to obtain the ip address of the phone

Anmeldedatum: 02.02.2011 Beiträge: 29

I have successfully been abe to run the software I am out of town using the hotels wi-fi and i have not been able to sync. I have used my cable and tried wi-fi. I keep getting this same error.

Site Admin Anmeldedatum: 15.02.2006 Beiträge: 32025 Wohnort: Tirol

If you are connected to a Hotspot then i'm sure the Hotspot is configured to hide local connected devices. In the next version of MyPhoneExplorer you'll be able to enter the IP of the phone manually and so the problem should get fixed

Anmeldedatum: 02.02.2011 Beiträge: 29

Hello,

I am back home and again neither the usb nor the wifi connections work.

Site Admin Anmeldedatum: 15.02.2006 Beiträge: 32025 Wohnort: Tirol

OK, please read the FAQ and if you have still no success then post the logfile after you tried to connect

Anmeldedatum: 02.02.2011 Beiträge: 29

I guess the adb portion of the install is new. i have a nexus one. I found this info to install rather than using the adb info you provided for samsung.

Here is the link http://forum.xda-developers.com/showthread.php?t=613217

I am not sure how to install once i open the menu "key +r" i am not sure what this means. I typed devmgmt.msc and I found myyself lost.

Site Admin Anmeldedatum: 15.02.2006 Beiträge: 32025 Wohnort: Tirol

"Winbdows key + r" means the same as Start-Run

Just activate USB-Debugging in phone, plug in the phone and tell windows the path of the needed drivers (the package you downloaded for your Nexus)

Anmeldedatum: 02.02.2011 Beiträge: 29

I believe I am having problems updating the nexus s driver sdk file. I downloaded it and extracted it. Then I go into the device manager right click to update nexus s and route it to the file I get a message saying unable to update driver.

Anmeldedatum: 02.02.2011 Beiträge: 29

One more question, is this file needed to resolve the sync with usb rather than the WIFI? Because USB connection is failing once the WIFI stopped working.

Anmeldedatum: 02.02.2011 Beiträge: 29

Here is the log file

Logdatei MyPhoneExplorer
************************
Programmversion: 1.8.0
Datum: 3/9/2011

17:15:51.78 Setting Port: 999
17:15:51.78 Setting Baud: 115200
17:15:51.78 Avaiable Ports: COM0=;
17:15:52.11 Main Load frmSplash
17:15:52.50 Load frmSplash...
17:15:55.73 Hauptfenster wird geladen
17:15:56.90 Sidebar fertig geladen
17:15:57.98 UC SMS wird geladen
17:15:58.15 UC Phonebook wird geladen
17:15:58.27 UC Phonebook fertig geladen
17:15:58.27 UC Calls wird geladen
17:15:58.40 UC Organizer wird geladen
17:15:58.83 Organizer initiated
17:15:58.86 Startpage=2
17:15:58.88 UC Filebrowser wird geladen
17:15:59.15 UC Filebrowser fertig geladen
17:15:59.15 UC AppBrowser wird geladen
17:15:59.18 UC Notes wird geladen
17:15:59.22 UC Calls wird geladen
17:15:59.36 Setting Lastuser: samsung Nexus S [355031040547735]
17:16:05.70 Lade Userdatenbank: samsung Nexus S [355031040547735]
17:16:06.18 LoadDatafile: Phonebook.dat(126567 Bytes)
17:16:07.29 Kontakte geladen
17:16:07.32 LoadDatafile: Calls.dat(14612 Bytes)
17:16:08.01 Anrufe geladen
17:16:08.07 LoadDatafile: Organizer.dat(28298 Bytes)
17:16:08.26 DoItemUpdate
17:16:14.92 DoItemUpdate fertig
17:16:15.10 Organizer geladen
17:16:15.12 Notizen geladen
17:16:15.12 Load SMS Data...
17:16:15.17 LoadDatafile: SMS.dat(270475 Bytes)
17:16:15.17 SMS - Datenbank wird geladen...
17:16:16.57 SMS Laden - Readfile: 47 Split: 16 Parse: 1388 HandleMultiSMS: 0 Nachrichten: 2030
17:16:16.62 LoadDatafile: SMSArchive.dat(14825 Bytes)
17:16:16.62 SMS Archiv laden - Parse: 47
17:16:17.82 RefreshList (Archive): Addrows=32 Sort=15 MenuUpdate=0 Redraw=0
17:16:19.16 SMS Data Loaded...
17:16:19.16 SMS geladen
17:16:23.11 Hauptfenster fertig geladen
17:16:23.12 GotAppCommand: Sync;FromJumplist
multisync

17:16:23.75 RunADBCommand: start-server
17:16:24.65 Downloader: RC=6 BytesMax=5 URL=http://www.fjsoft.at/myphoneexplorer/version.txt
17:16:29.08 ADB CommandResponse: * daemon not running. starting it now on port 5037 *
* daemon started successfully *
17:16:29.08 RunADBCommand: devices
17:16:29.28 ADB CommandResponse: List of devices attached
17:16:29.28 Run DeviceTracker
17:16:29.30 Init Tracker
17:16:29.30 Connect to Android failed!
17:16:29.30 bOpened=False
17:16:29.30 No device attached to USB
17:16:29.30 Refresh ComDescriptions...
17:16:29.31 ErrMsg: Connection to phone could not be established:
No device attached to USB
17:16:29.41 Device Tracker Message: OKAY0000
17:25:41.29 Refresh ComDescriptions...
17:25:44.19 StickyNotesPath=C:\Windows\Sysnative\StikyNot.exe FileExists=False

Moderator Anmeldedatum: 14.10.2010 Beiträge: 209 Wohnort: München

it seems like MPE doesnt "see" your device".

Did you enable "USB Debugging"?

Anmeldedatum: 02.02.2011 Beiträge: 29

I just spoke to samsung. The Nexus S and Nexus one do not have drivers and therefore USB-Debugging must be deactived.

Everything works fine.

Moderator Anmeldedatum: 14.10.2010 Beiträge: 209 Wohnort: München

ok, so you do access your phone over wifi (thus there is no usb debugging needed), or did it work over usb (without usb debugging ... which would be a first Wink

).

Anmeldedatum: 02.02.2011 Beiträge: 29

I am having the same failure issue with whether usb-debugging is on or off. Nothing has changed on my end.

Logdatei MyPhoneExplorer
************************
Programmversion: 1.8.0
Datum: 3/14/2011

00:01:36.14 Setting Port: 999
00:01:36.14 Setting Baud: 115200
00:01:36.14 Avaiable Ports: COM0=;
00:01:36.14 Main Load frmSplash
00:01:36.18 Load frmSplash...
00:01:36.18 Show splash...
00:01:36.23 frmSplash geladen
00:01:38.87 Hauptfenster wird geladen
00:01:39.93 Sidebar fertig geladen
00:01:40.40 UC SMS wird geladen
00:01:40.59 UC Phonebook wird geladen
00:01:40.71 UC Phonebook fertig geladen
00:01:40.71 UC Calls wird geladen
00:01:40.82 UC Organizer wird geladen
00:01:41.14 Organizer initiated
00:01:41.23 Startpage=2
00:01:41.26 DoItemUpdate
00:01:41.37 DoItemUpdate fertig
00:01:41.39 UC Filebrowser wird geladen
00:01:41.65 UC Filebrowser fertig geladen
00:01:41.65 UC AppBrowser wird geladen
00:01:41.68 UC Notes wird geladen
00:01:41.73 UC Calls wird geladen
00:01:41.87 Setting Lastuser: samsung Nexus S [355031040547735]
00:01:45.99 Lade Userdatenbank: samsung Nexus S [355031040547735]
00:01:46.52 LoadDatafile: Phonebook.dat(131158 Bytes)
00:01:47.72 Kontakte geladen
00:01:47.74 LoadDatafile: Calls.dat(15610 Bytes)
00:01:48.47 Anrufe geladen
00:01:48.55 LoadDatafile: Organizer.dat(24498 Bytes)
00:01:48.69 DoItemUpdate
00:01:52.17 DoItemUpdate fertig
00:01:52.70 DoItemUpdate
00:01:56.51 DoItemUpdate fertig
00:01:56.77 Organizer geladen
00:01:56.79 Notizen geladen
00:01:56.80 Load SMS Data...
00:01:56.83 LoadDatafile: SMS.dat(341178 Bytes)
00:01:56.84 SMS - Datenbank wird geladen...
00:01:59.33 SMS Laden - Readfile: 47 Split: 0 Parse: 2464 HandleMultiSMS: 16 Nachrichten: 2534
00:01:59.33 LoadDatafile: SMSArchive.dat(29487 Bytes)
00:01:59.34 SMS Archiv laden - Parse: 16
00:02:01.17 RefreshList (Archive): Addrows=78 Sort=31 MenuUpdate=0 Redraw=0
00:02:03.36 SMS Data Loaded...
00:02:03.36 SMS geladen
00:02:04.56 Hauptfenster fertig geladen
00:02:05.05 Downloader: RC=6 BytesMax=5 URL=http://www.fjsoft.at/myphoneexplorer/version.txt
00:02:14.02 RunADBCommand: start-server
00:02:14.28 ADB CommandResponse:
00:02:14.28 RunADBCommand: devices
00:02:14.48 ADB CommandResponse: List of devices attached
00:02:14.48 Run DeviceTracker
00:02:14.49 Init Tracker
00:02:14.49 Connect to Android failed!
00:02:14.49 bOpened=False
00:02:14.50 No device attached to USB
00:02:14.50 Refresh ComDescriptions...
00:02:14.50 ErrMsg: Connection to phone could not be established:
No device attached to USB
00:02:14.59 Device Tracker Message: OKAY0000
00:04:58.86 Refresh ComDescriptions...
00:05:02.60 StickyNotesPath=C:\Windows\Sysnative\StikyNot.exe FileExists=False

Moderator Anmeldedatum: 14.10.2010 Beiträge: 209 Wohnort: München

"No device attached to USB "

MPE doesnt recognize your Phone. To be honest, I'm not sure if there are ADB Drivers for the Nexus S available yet.

For a workaround, try using WIFI instead of usb for the moment or install the correct ADB Drivers AND enable USB Debugging!

Anmeldedatum: 02.02.2011 Beiträge: 29

Samsung says there are no drivers required for the phone it works sometimnes. As far as the Wifi and USB are concerned either they both work or neither work. I also get a new message when before the failure message comes up, it "address in use"

Informationen zum Datenschutz auf dieser Website