Empty Phone Contact list on K800i

Anmeldedatum: 04.12.2006 Beiträge: 3 Wohnort: Farnham

Hi

I have just started using your software and it seems to be working well with one small exception - the phone contacts list appears to be empty. When I aks for a sync it appears to talk to the phone, which quickly shows a "Session completed" message. The correct number of contacts is shown in the Memory Status page.

I do get a list if I look at the contacts on the SIM card. I have reproduced this with 1.54 and 1.55.

Is there anything that I could be doing wrong?

Site Admin Anmeldedatum: 15.02.2006 Beiträge: 31492 Wohnort: Tirol

Logfile ?

Anmeldedatum: 04.12.2006 Beiträge: 3 Wohnort: Farnham

Sorry, wasn't sure if it was best to post that.

Code:

Logdatei MyPhoneExplorer
************************
Programmversion: 1.5.5
Datum: 04/12/2006

17:14:30.97 Setting Port: 6
17:14:31.00 Setting Baud: 921600
17:14:31.00 Avaiable Ports: COM1=\Device\Serial0; COM3=Winachsf0; COM6=\Device\BthModem1; COM15=\Device\BthModem2; COM16=\Device\BthModem3;
17:14:35.48 Hauptfenster wird geladen
17:14:36.22 Sidebar fertig geladen
17:14:36.26 Farbschema wurde gelesen
17:14:36.59 UC SMS wird geladen
17:14:36.78 UC Phonebook wird geladen
17:14:36.86 UC Phonebook fertig geladen
17:14:36.86 UC Calls wird geladen
17:14:37.22 UC Organizer wird geladen
17:14:37.48 DoItemUpdate
17:14:37.51 DoItemUpdate fertig
17:14:37.73 UC Notes wird geladen
17:14:37.75 UC Calls wird geladen
17:14:37.81 Setting Lastuser: Sony Ericsson K800 [353427018042976]
17:14:37.81 Lade Userdatenbank: Sony Ericsson K800 [353427018042976]
17:14:37.81 GMT Einstellungen geladen
17:14:37.81 InfoSMS geladen
17:14:37.81 Notizeintrag gesetzt
17:14:37.84 Kontakte geladen
17:14:37.86 DoItemUpdate
17:14:37.95 DoItemUpdate fertig
17:14:37.95 Organizer geladen
17:14:37.97 Notizen geladen
17:14:37.97 SMS - Datenbank wird geladen...
17:14:37.97 SMS Laden - Readfile: 0 Split: 0 Parse: 0 HandleMultiSMS: 0 Nachrichten: 2
17:14:37.97 SMS geladen
17:14:38.00 Anrufe geladen
17:14:38.19 Hauptfenster fertig geladen
17:14:38.56 Downloader: RC=6 Bytes=5 URL=http://www.fjsoft.at/myphoneexplorer/version.txt
17:14:42.73 Neue COM-Bibliothek wird verwendet
17:14:45.54 Settimeout: RT=2000 WT=200
17:14:46.04 Port 6 wurde geöffnet !
17:14:46.48 [TX]: AT+CGSN
17:14:46.59 [RX]: AT+CGSN

17:14:46.59 [RX]: 353427018042976
17:14:46.62 [RX]: OK
17:14:46.62 Settimeout: RT=10000 WT=1000
17:14:46.62 [TX]: AT+CGMI
17:14:46.75 [RX]: AT+CGMI

17:14:46.75 [RX]: Sony Ericsson
17:14:46.76 [RX]: OK
17:14:46.76 [TX]: ATI
17:14:46.90 [RX]: ATI

17:14:46.90 [RX]: Sony Ericsson K800
17:14:46.95 [RX]: OK
17:14:46.98 [TX]: AT+CSCS="UTF-8"
17:14:47.11 [RX]: AT+CSCS="UTF-8"

17:14:47.11 [RX]: OK
17:14:47.11 [TX]: AT+CNMI=2,1,0,1
17:14:49.39 [RX]: AT+CNMI=2,1,0,1

17:14:49.39 [RX]: OK
17:14:49.69 [TX]: AT*ECAM=1
17:14:49.79 [RX]: AT*ECAM=1

17:14:49.79 [RX]: OK
17:14:49.81 [TX]: AT*EVH=?
17:14:49.97 [RX]: AT*EVH=?

17:14:49.97 [RX]: ERROR
17:14:49.98 [TX]: AT+CBC
17:14:50.17 [RX]: AT+CBC

17:14:50.17 [RX]: +CBC: 0, 77
17:14:50.25 [RX]: OK
17:14:50.26 [TX]: AT+CSQ
17:14:50.40 [RX]: AT+CSQ

17:14:50.40 [RX]: +CSQ: 99,99
17:14:50.50 [RX]: OK
17:14:50.50 Alle Verbindungsaktionen beendet
17:14:50.51 Suche Memorystick: C:\ E:\ G:\ R:\ W:\
17:14:50.51 Suche abgeschlossen:
17:14:50.75 [TX]: AT*EOBEX
17:14:50.89 [RX]: AT*EOBEX

17:14:50.89 [RX]: ERROR
17:14:50.89 [TX]: AT+CPROT=0
17:14:51.00 [RX]: AT+CPROT=0

17:14:51.00 [RX]: CONNECT
17:14:51.00 OBEX Connect: 4096 Bytes Paketgröße, Target:
17:14:51.00 [TX]: 80 00 13 10 00 10 00 46 00 0C 49 52 4D 43 2D 53 59 4E 43
17:14:51.11 [RX]: A0 00 18 10 00 10 00 4A 00 0C 49 52 4D 43 2D 53 59 4E 43 CB 00 00 00 0F
17:14:51.11 Connection ID:15
17:14:51.11 Paketgröße: 4096, maximal möglich:4096
17:14:51.11 Ermittle und verarbeite info.log
17:14:51.11 OBEX Get: telecom/pb/info.log
17:14:51.11 [TX]: 83 00 2E 01 00 2B 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 69 00 6E 00 66 00 6F 00 2E 00 6C 00 6F 00 67 00 00
17:14:51.19 [RX]: A0 01 E3 49 01 E0 54 6F 74 61 6C 2D 52 65 63 6F 72 64 73 3A 37 34 0D 0A 4D 61 78 69 6D 75 6D 2D 52 65 63 6F 72 64 73 3A 31 30 30 30 0D 0A 46 72 65 65 2D 52 65 63 6F 72 64 73 3A 39 32 36 0D 0A 44 49 44 3A 34 34 46 36 32 37 30 38 0D 0A 49 45 4C 3A 30 78 30 38 0D 0A 48 44 3A 59 45 53 0D 0A 53 41 54 3A 43 43 0D 0A 4D 43 4C 3A 4E 4F 0D 0A 49 43 4C 3A 4E 4F 0D 0A 4F 43 4C 3A 4E 4F 0D 0A 58 2D 49 52 4D 43 2D 46 49 45 4C 44 53 3A 0D 0A 3C 42 65 67 69 6E 3E 0D 0A 56 45 52 53 49 4F 4E 3A 0D 0A 4E 3B 43 48 41 52 53 45 54 3D 49 53 4F 2D 38 38 35 39 2D 31 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 38 5B 31 3D 31 35 3B 32 3D 31 35 5D 3A 3D 33 30 0D 0A 45 4D 41 49 4C 3B 54 59 50 45 3D 49 4E 54 45 52 4E 45 54 3A 3D 35 30 0D 0A 54 49 54 4C 45 3B 43 48 41 52 53 45 54 3D 49 53 4F 2D 38 38 35 39 2D 31 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 38 3A 3D 31 35 0D 0A 4F 52 47 3B 43 48 41 52 53 45 54 3D 49 53 4F 2D 38 38 35 39 2D 31 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 38 3A 3D 31 35 0D 0A 58 2D 54 45 4C 2D 54 59 50 45 53 3A 36 0D 0A 54 45 4C 3B 54 59 50 45 3D 57 4F 52 4B 3A 3D 34 30 0D 0A 54 45 4C 3B 54 59 50 45 3D 48 4F 4D 45 3A 3D 34 30 0D 0A 54 45 4C 3B 54 59 50 45 3D 43 45 4C 4C 3A 3D 34 30 0D 0A 54 45 4C 3B 54 59 50 45 3D 46 41 58 3A 3D 34 30 0D 0A 54 45 4C 3B 54 59 50 45 3D 50 41 47 45 52 3A 3D 34 30 0D 0A 54 45 4C 3A 3D 34 30 0D 0A 55 52 4C 3A 3D 35 30 0D 0A 58 2D 49 52 4D 43 2D 4C 55 49 44 3A 3D 31 32 0D 0A 52 45 56 3A 0D 0A 3C 45 6E 64 3E 0D 0A
17:14:51.19 ObexGet Fertig, Returncode=A0
17:14:51.19 Info.log:
Total-Records:74
Maximum-Records:1000
Free-Records:926
DID:44F62708
IEL:0x08
HD:YES
SAT:CC
MCL:NO
ICL:NO
OCL:NO
X-IRMC-FIELDS:
<Begin>
VERSION:
N;CHARSET=ISO-8859-1;CHARSET=UTF-8[1=15;2=15]:=30
EMAIL;TYPE=INTERNET:=50
TITLE;CHARSET=ISO-8859-1;CHARSET=UTF-8:=15
ORG;CHARSET=ISO-8859-1;CHARSET=UTF-8:=15
X-TEL-TYPES:6
TEL;TYPE=WORK:=40
TEL;TYPE=HOME:=40
TEL;TYPE=CELL:=40
TEL;TYPE=FAX:=40
TEL;TYPE=PAGER:=40
TEL:=40
URL:=50
X-IRMC-LUID:=12
REV:
<End>

17:14:51.19 OBEX Get: telecom/pb/luid/cc.Log
17:14:51.19 [TX]: 83 00 34 01 00 31 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 6C 00 75 00 69 00 64 00 2F 00 63 00 63 00 2E 00 4C 00 6F 00 67 00 00
17:14:51.31 [RX]: A0 00 0B 49 00 08 32 34 34 0D 0A
17:14:51.31 ObexGet Fertig, Returncode=A0
17:14:51.33 OBEX Get: telecom/pb/luid/109.log
17:14:51.33 [TX]: 83 00 36 01 00 33 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 6C 00 75 00 69 00 64 00 2F 00 31 00 30 00 39 00 2E 00 6C 00 6F 00 67 00 00
17:14:51.70 [RX]: A0 00 52 49 00 4F 53 4E 3A 33 35 33 34 32 37 30 31 38 30 34 32 39 37 36 0D 0A 44 49 44 3A 34 34 46 36 32 37 30 38 0D 0A 54 6F 74 61 6C 2D 52 65 63 6F 72 64 73 3A 37 34 0D 0A 4D 61 78 69 6D 75 6D 2D 52 65 63 6F 72 64 73 3A 31 30 30 30 0D 0A 0D 0A
17:14:51.70 ObexGet Fertig, Returncode=A0
17:14:51.72 OBEX Disconnect
17:14:51.72 [TX]: 81 00 03
17:14:51.76 [RX]: A0 00 03
17:14:51.76 Disconnect hat funktioniert
17:14:51.76 Lese noch den OK-String
17:15:00.51 Settimeout: RT=1500 WT=800
17:15:00.51 [TX]: AT+CBC
17:15:00.59 [RX]: AT+CBC

17:15:00.59 [RX]: +CBC: 0, 77
17:15:00.61 [RX]: OK
17:15:00.62 [TX]: AT+CSQ
17:15:00.75 [RX]: AT+CSQ

17:15:00.75 [RX]: +CSQ: 99,99
17:15:00.75 [RX]: OK
17:15:00.79 Terminate Subclass
17:15:00.79 Unload Iconlib
17:15:00.79 Terminate Tray
17:15:00.83 Killing temporary Files
17:15:00.83 Terminate: Calls
17:15:00.84 Terminate: PB
17:15:00.86 Terminate: Notes
17:15:00.86 Terminate: Organizer
17:15:00.93 Terminate: SMS
17:15:00.93 SMS - Datenbank wird gespeichert...
17:15:00.95 ClosePort
17:15:00.95 Port 6 wird geschlossen
17:15:01.04 Form_QueryUnload -> Ende
17:15:01.04 Unload: frmSplash
17:15:01.04 Form_Unload -> Ende

[/code]

Anmeldedatum: 22.09.2006 Beiträge: 4

Perhaps the Column Headings are not ticked in the Contact View pane.

Access the context menu by right mouse xxx on the column heading area of the contact view pane(the bar just below the Toolbar buttons.)
Select the columns you want to display in the Contact View. e.g. Name, mobile number etc

I have this problem too, and MPE doesn't seem to remember its view settings, so I have to display the columns each time I restart MPE.

I've uninstalled and reinstalled, and also installed a more up to date version(1.5.4), but doesn't seem to fix the problem.

I don't think I saw this behaviour in an older version, and running regseeker may have cause it, but I can't be sure.

Anyone know a fix?

Site Admin Anmeldedatum: 15.02.2006 Beiträge: 31492 Wohnort: Tirol

@LPG:
Your problem has nothing to do with markans - the next time please make a new thread. To the problem (i tried it out and on my machine it works perfect): Ensure that you have write-access to the database-folder. Otherwise move it (look at settings/advandget 2)

@markan: Use the green arrowbutton to download a fresh copy of the contacts.

Anmeldedatum: 04.12.2006 Beiträge: 3 Wohnort: Farnham

Thanks FJ, I shall hang my head in shame Embarassed

Great software by the way!

Informationen zum Datenschutz auf dieser Website