MyPhoneExplorer 1.8.1 w/ Samsung Galaxy S II (GT-I9100)

Gast

Hi everyone,
I am wondering if my phone explorer will be supporting the new samsung galaxy s II (GT-I9100) via USB. I can get it to work through Wifi but cannot through USB.

Wifi

Zitat:

14:26:09.25 Everything is done
14:26:10.21 Try connecting to 10.1.45.187 (fixed IP)...
14:26:10.36 Connect to Android OK
14:26:10.36 Settimeout: RT=2000 WT=500
14:26:10.36 bOpened=True
14:26:10.37 [TX]: AT+CGSN
14:26:10.40 [RX]: AT+CGSN
14:26:10.40 [RX]: 355310044152068
14:26:10.40 [RX]: OK
14:26:10.40 Settimeout: RT=15000 WT=1000
14:26:10.40 [TX]: AT*PIN?
14:26:10.43 [RX]: AT*PIN?
14:26:10.43 [RX]: *PIN: ACCESS OK,10
14:26:10.43 [RX]: OK
14:26:10.43 [TX]: ATI
14:26:10.46 [RX]: ATI
14:26:10.46 [RX]: samsung GT-I9100
14:26:10.46 [RX]: OK
14:26:10.46 [TX]: AT*APPVERSION=1.8.1
14:26:10.49 [RX]: AT*APPVERSION=1.8.1
14:26:10.49 [RX]: 10,1.0.10
14:26:10.49 [RX]: OK
14:26:10.49 [TX]: AT+CSCS="UTF-8"
14:26:10.52 [RX]: AT+CSCS="UTF-8"
14:26:10.52 [RX]: OK
14:26:10.52 [TX]: AT+CNMI=2,1,0,1
14:26:10.55 [RX]: AT+CNMI=2,1,0,1
14:26:10.55 [RX]: ERROR
14:26:10.56 [TX]: AT*ECAM=1
14:26:10.59 [RX]: AT*ECAM=1
14:26:10.59 [RX]: OK
14:26:10.60 [TX]: AT+CIND=?
14:26:10.63 [RX]: AT+CIND=?
14:26:10.63 [RX]: ERROR
14:26:10.63 [TX]: AT+CBC
14:26:10.66 [RX]: AT+CBC
14:26:10.66 [RX]: +CBC: 1,85
14:26:10.66 [RX]: OK
14:26:10.66 [TX]: AT+CSQ
14:26:10.92 [RX]: AT+CSQ
14:26:10.92 [RX]: +CSQ: -1,99
14:26:10.93 [RX]: OK
14:26:10.93 Alle Verbindungsaktionen beendet
14:26:11.11 Form_Activate fSync Operation=8
14:26:11.11 SMS-Import prepared, TempStore: Inbox=11 Sent=11
14:26:11.11 Settimeout: RT=45000 WT=1000
14:26:11.11 [TX]: AT+CPMS="ME","SM"
14:26:11.21 [RX]: AT+CPMS="ME","SM"
14:26:11.21 [RX]: +CPMS: 22,20000,0,0
14:26:11.21 [RX]: OK
14:26:11.41 [TX]: AT+CMGL=4
14:26:11.50 [RX]: AT+CMGL=4

USB

Zitat:

Logdatei MyPhoneExplorer
************************
Programmversion: 1.8.1
Datum: 1/07/2011

14:16:56.34 Setting Port: 999
14:16:56.34 Setting Baud: 921600
14:16:56.34 Avaiable Ports: COM3=Winachsf0; COM25=\Device\Serial0;
14:16:56.34 Main Load frmSplash
14:16:56.35 Load frmSplash...
14:16:56.36 Show splash...
14:16:56.37 frmSplash geladen
14:16:57.33 Hauptfenster wird geladen
14:16:57.53 Sidebar fertig geladen
14:16:57.73 UC SMS wird geladen
14:16:57.80 UC Phonebook wird geladen
14:16:57.84 UC Phonebook fertig geladen
14:16:57.84 UC Calls wird geladen
14:16:57.90 UC Organizer wird geladen
14:16:57.99 Organizer initiated
14:16:58.04 Startpage=2
14:16:58.06 UC Filebrowser wird geladen
14:16:58.15 UC Filebrowser fertig geladen
14:16:58.15 UC AppBrowser wird geladen
14:16:58.16 UC Notes wird geladen
14:16:58.18 UC Calls wird geladen
14:16:58.21 Setting Lastuser: samsung GT-I9100 [355310044152068]
14:16:58.23 Lade Userdatenbank: samsung GT-I9100 [355310044152068]
14:16:58.34 LoadDatafile: Phonebook.dat(41569 Bytes)
14:16:58.51 Kontakte geladen
14:16:58.51 LoadDatafile: Calls.dat(175 Bytes)
14:16:58.53 Anrufe geladen
14:16:58.55 LoadDatafile: Organizer.dat(4257 Bytes)
14:16:58.57 DoItemUpdate
14:16:58.61 DoItemUpdate fertig
14:16:58.63 Organizer geladen
14:16:58.63 Notizen geladen
14:16:58.63 Load SMS Data...
14:16:58.64 LoadDatafile: SMS.dat(3538 Bytes)
14:16:58.64 SMS - Datenbank wird geladen...
14:16:58.64 SMS Laden - Readfile: 16 Split: 0 Parse: 0 HandleMultiSMS: 0 Nachrichten: 24
14:16:58.67 RefreshList (Archive): Addrows=0 Sort=0 MenuUpdate=0 Redraw=0
14:16:58.69 SMS Data Loaded...
14:16:58.72 SMS geladen
14:16:59.03 Hauptfenster fertig geladen
14:16:59.83 Downloader: RC=6 BytesMax=5 URL=http://www.fjsoft.at/myphoneexplorer/version.txt
14:17:00.90 RunADBCommand: start-server
14:17:04.95 ADB CommandResponse: * daemon not running. starting it now on port 5037 *
* daemon started successfully *
14:17:04.95 RunADBCommand: devices
14:17:04.98 ADB CommandResponse: List of devices attached
14:17:04.98 Run DeviceTracker
14:17:04.99 Init Tracker
14:17:04.99 Connect to Android failed!
14:17:04.99 bOpened=False
14:17:04.99 No device attached to USB
14:17:04.99 Refresh ComDescriptions...
14:17:05.00 PORT: COM25 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_3B67&SUBSYS_040A1028&REV_06\3&11583659&0&B3
14:17:05.00 MODEM: COM3 Enumerator=HDAUDIO Displayed=Conexant HDA D330 MDC V.92 Modem FriendlyName=Conexant HDA D330 MDC V.92 Modem InstanceID=HDAUDIO\FUNC_02&VEN_14F1&DEV_2C06&SUBSYS_14F1000F&REV_1000\4&143C5CA7&0&0102
14:17:05.01 ErrMsg: Connection to phone could not be established:
No device attached to USB
14:17:05.02 Device Tracker Message: OKAY0000
14:17:08.44 Refresh ComDescriptions...
14:17:08.44 PORT: COM25 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_3B67&SUBSYS_040A1028&REV_06\3&11583659&0&B3
14:17:08.44 MODEM: COM3 Enumerator=HDAUDIO Displayed=Conexant HDA D330 MDC V.92 Modem FriendlyName=Conexant HDA D330 MDC V.92 Modem InstanceID=HDAUDIO\FUNC_02&VEN_14F1&DEV_2C06&SUBSYS_14F1000F&REV_1000\4&143C5CA7&0&0102
14:17:09.22 StickyNotesPath=C:\Windows\Sysnative\StikyNot.exe FileExists=True
14:17:09.22 StickyNotesTitle=Sticky Notes

I have installed the ADB Driver - ver1.3.2410.0
And turned USB Debugging on

Any help would be appreciated.

Gast

not much more to add...

HELP !!!!!!!!!!!!!!!!!! Very Happy

Gast

I haven't found any problem with I9100 via USB.

Have you installed latest Kies from Samsung?

Gast

I have installed Kies- 2.0.1.11053_99_3 and Samsung USB driver 1.3.2410.0
USB Debug on.
MyPhoneExplorer with the I9100 via USB gives the error:

Zitat:

---------------------------
Error...
---------------------------
Connection to phone could not be established:

No device attached to USB
---------------------------
OK Help
---------------------------

Zitat:

08:59:42.83 ADB CommandResponse: * daemon not running. starting it now on port 5037 *
* daemon started successfully *
08:59:42.83 RunADBCommand: devices
08:59:42.86 ADB CommandResponse: List of devices attached
08:59:42.86 Run DeviceTracker
08:59:42.87 Init Tracker
08:59:42.87 Connect to Android failed!
08:59:42.87 bOpened=False
08:59:42.87 No device attached to USB
08:59:42.87 Refresh ComDescriptions...
08:59:42.87 PORT: COM25 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_3B67&SUBSYS_040A1028&REV_06\3&11583659&0&B3
08:59:42.88 MODEM: COM3 Enumerator=HDAUDIO Displayed=Conexant HDA D330 MDC V.92 Modem FriendlyName=Conexant HDA D330 MDC V.92 Modem InstanceID=HDAUDIO\FUNC_02&VEN_14F1&DEV_2C06&SUBSYS_14F1000F&REV_1000\4&143C5CA7&0&0102
08:59:42.88 ErrMsg: Connection to phone could not be established:
No device attached to USB
08:59:42.89 Device Tracker Message: OKAY0000
08:59:47.52 Refresh ComDescriptions...
08:59:47.52 PORT: COM25 Enumerator=PCI Displayed=Intel(R) Active Management Technology - SOL InstanceID=PCI\VEN_8086&DEV_3B67&SUBSYS_040A1028&REV_06\3&11583659&0&B3
08:59:47.52 MODEM: COM3 Enumerator=HDAUDIO Displayed=Conexant HDA D330 MDC V.92 Modem FriendlyName=Conexant HDA D330 MDC V.92 Modem InstanceID=HDAUDIO\FUNC_02&VEN_14F1&DEV_2C06&SUBSYS_14F1000F&REV_1000\4&143C5CA7&0&0102
08:59:48.08 StickyNotesPath=C:\Windows\Sysnative\StikyNot.exe FileExists=True
08:59:48.08 StickyNotesTitle=Sticky Notes

I have been able to successfully connect via Wifi-Direct IP.

Gast

Problem now resolved. It was a driver issue. Thanks all.

Verfasst am: Mi Jul 06, 2011 11:42

goldmark hat Folgendes geschrieben:

Problem now resolved. It was a driver issue.

Hi - how did you solve it exactly?

Anmeldedatum: 15.12.2010 Beiträge: 2 Wohnort: Singapore

Whew..... MPE works on my SGSII. Smile

Informationen zum Datenschutz auf dieser Website