MPE and Windows Vista

Gast

Short question: I just want to find out if MPE will work on Windows Vista?

Site Admin Anmeldedatum: 15.02.2006 Beiträge: 31492 Wohnort: Tirol

Yes - basicly it works, if you have problems just ask

Anmeldedatum: 31.12.2006 Beiträge: 2

Ok, i have Vista Ultimate (Build 6000) wich means final version and the MPE "works"

What not works is the port detection.. i see on my devices and have :

OBEX Interface on COM4
Device Management on COM7

I must write COM7 directly on Port configuration of MPE to make it work.. the COMBO appears blank. Ok, it works now..

The only thing that not works is when i try to send files from Pc to Phone, it just shows an error

Error sending: whatever.mp3
OBEX Errorcode: 00- Phone didn`t answer.

If i change the port to COM4 then it just not connect

I have a Z520a

BTW, i download the drivers from here :

http://www.sonyericsson.com/spg.jsp?cc=gb&lc=en&ver=4000&template=ps1_1_3_1_1&zone=ps&lm=ps1_1&pid=10298&fid=17813&esi=true

Direct link : http://www.sonyericsson.com/downloads/Z520_Signed_USB_drivers.zip

Site Admin Anmeldedatum: 15.02.2006 Beiträge: 31492 Wohnort: Tirol

I know about the issue that the ports arent listed. I will check it if i have Vista on my machine.

To your problem - you have set the wrong Port. Look in the windows devicemanager under "Modems" there you'll find the right one.

Anmeldedatum: 31.12.2006 Beiträge: 2

Yes, i ws wrong.. i see before under Ports (COM and LPT) instead Modems. I write COM5 and works fine now

Thanks Very Happy

Informationen zum Datenschutz auf dieser Website