Can´t sync address fields

Gast

I can´t get the address fields to sync. Not between phone(T630) and mpc nore mpc and Outlook 2003.
When I sync between phone and mpc(after input in mpc) the fields goes blanc. Same problem in both 1.4.5 and 1.5.7.

And when I try to sync Outlook to MPC the addresses doesn´t get transfered.

Running XP Pro SP2

/Mattias

Site Admin Anmeldedatum: 15.02.2006 Beiträge: 31492 Wohnort: Tirol

I need a littlebit more infos.
- Does it happen with all contacts
- you get no address or you don't get the whole contact ?
- Have you selected the Address in Outlook as "Postaddress" ?
- Are there any special chars in the address ?

Thank´s for your quick reply!

-yes
-just the address
-yes
-i´ve tried both, addresses with special chars or just a number for test

It´s seems like my phone can´t store postal addresses but that shouldn´t stop mpe to sync addresses fields with outlook, right?

Site Admin Anmeldedatum: 15.02.2006 Beiträge: 31492 Wohnort: Tirol

That would be possible. But MyPhoneExplorer always gets a fresh copy from the phone after the sync to ensure that both entrys are equal. The older phones had a little bug in the contact-management if you are using not full compatible addresses.

- deactivate the sync with outlook
- edit a contact in myphoneExplorer
- sync and look what happens

Gast

This is what the logg lokes like after I´ve updated the address of an existing contact in mpe and then sync with the phone.

After sync, the address fields are empty again.

Logdatei MyPhoneExplorer
************************
Programmversion: 1.5.7
Datum: 2006-12-30

13:46:50.29 Setting Port: 3
13:46:50.29 Setting Baud: 115200
13:46:50.29 Avaiable Ports: COM1=\Device\Serial0; COM3=\Device\VCP0;
13:46:52.09 Hauptfenster wird geladen
13:46:52.20 Sidebar fertig geladen
13:46:52.21 Farbschema wurde gelesen
13:46:52.28 UC SMS wird geladen
13:46:52.31 UC Phonebook wird geladen
13:46:52.34 UC Phonebook fertig geladen
13:46:52.34 UC Calls wird geladen
13:46:52.38 UC Organizer wird geladen
13:46:52.46 DoItemUpdate
13:46:52.48 DoItemUpdate fertig
13:46:52.70 UC Notes wird geladen
13:46:52.71 UC Calls wird geladen
13:46:52.73 Setting Lastuser: T630-T628 [354290009578856]
13:46:52.73 Lade Userdatenbank: T630-T628 [354290009578856]
13:46:52.73 GMT Einstellungen geladen
13:46:52.73 InfoSMS geladen
13:46:52.73 Notizeintrag gesetzt
13:46:52.93 Kontakte geladen
13:46:52.98 DoItemUpdate
13:46:53.00 DoItemUpdate fertig
13:46:53.03 Organizer geladen
13:46:53.03 Notizen geladen
13:46:53.03 SMS - Datenbank wird geladen...
13:46:53.04 SMS Laden - Readfile: 0 Split: 0 Parse: 15 HandleMultiSMS: 0 Nachrichten: 10
13:46:53.04 SMS geladen
13:46:53.07 Anrufe geladen
13:46:53.10 Hauptfenster fertig geladen
13:56:25.51 Downloader: RC=6 BytesMax=237 BytesTMP=237 URL=zensiert
13:56:57.43 DoItemUpdate
13:56:57.45 DoItemUpdate fertig
13:57:01.88 Neue COM-Bibliothek wird verwendet
13:57:01.95 Settimeout: RT=2000 WT=200
13:57:02.45 Port 3 wurde geöffnet !
13:57:02.45 [TX]: AT+CGSN
13:57:02.50 [RX]: •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••AT+CGSN

13:57:02.50 [RX]: 354290009578856
13:57:02.51 [RX]: OK
13:57:02.51 Settimeout: RT=10000 WT=1000
13:57:02.51 [TX]: AT+CGMI
13:57:02.56 [RX]: AT+CGMI

13:57:02.56 [RX]: SONY ERICSSON
13:57:02.57 [RX]: OK
13:57:02.57 [TX]: ATI
13:57:02.60 [RX]: ATI

13:57:02.60 [RX]: T630-T628
13:57:02.60 [RX]: OK
13:57:02.60 [TX]: AT+CSCS="UTF-8"
13:57:02.65 [RX]: AT+CSCS="UTF-8"

13:57:02.65 [RX]: OK
13:57:02.65 [TX]: AT+CNMI=2,1,0,1
13:57:02.70 [RX]: AT+CNMI=2,1,0,1

13:57:02.70 [RX]: +CMS ERROR: 303
13:57:02.70 [TX]: AT+CNMI=2,1
13:57:02.75 [RX]: AT+CNMI=2,1

13:57:02.75 [RX]: OK
13:57:02.75 [TX]: AT*ECAM=1
13:57:02.81 [RX]: AT*ECAM=1

13:57:02.81 [RX]: OK
13:57:02.81 [TX]: AT*EVH=?
13:57:02.87 [RX]: AT*EVH=?

13:57:02.87 [RX]: OK
13:57:02.88 [TX]: AT+CBC
13:57:02.92 [RX]: AT+CBC

13:57:02.92 [RX]: +CBC: 1,91
13:57:02.93 [RX]: OK
13:57:02.93 [TX]: AT+CSQ
13:57:02.98 [RX]: AT+CSQ

13:57:02.98 [RX]: +CSQ: 31,99
13:57:03.00 [RX]: OK
13:57:03.01 Alle Verbindungsaktionen beendet
13:57:03.01 Suche Memorystick: C:\ D:\ E:\ F:\ G:\
13:57:03.01 Suche abgeschlossen:
13:57:03.06 [TX]: AT*EOBEX
13:57:03.09 [RX]: AT*EOBEX

13:57:03.09 [RX]: CONNECT
13:57:03.09 OBEX Connect: 512 Bytes Paketgröße, Target:
13:57:03.09 [TX]: 80 00 13 10 00 02 00 46 00 0C 49 52 4D 43 2D 53 59 4E 43
13:57:03.10 [RX]: A0 00 18 10 00 02 00 CB 00 00 00 01 4A 00 0C 49 52 4D 43 2D 53 59 4E 43
13:57:03.10 Connection ID:1
13:57:03.10 Paketgröße: 512, maximal möglich:512
13:57:03.10 Ermittle und verarbeite info.log
13:57:03.10 OBEX Get: telecom/pb/info.log
13:57:03.10 [TX]: 83 00 2E 01 00 2B 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 69 00 6E 00 66 00 6F 00 2E 00 6C 00 6F 00 67 00 00
13:57:03.20 [RX]: A0 01 C2 01 00 03 49 01 BC 54 6F 74 61 6C 2D 52 65 63 6F 72 64 73 3A 39 38 0D 0A 4D 61 78 69 6D 75 6D 2D 52 65 63 6F 72 64 73 3A 2A 0D 0A 46 72 65 65 2D 52 65 63 6F 72 64 73 3A 33 37 39 0D 0A 44 49 44 3A 43 42 39 42 0D 0A 49 45 4C 3A 30 78 30 38 0D 0A 48 44 3A 59 45 53 0D 0A 53 41 54 3A 43 43 0D 0A 4D 43 4C 3A 4E 4F 0D 0A 49 43 4C 3A 4E 4F 0D 0A 4F 43 4C 3A 4E 4F 0D 0A 58 2D 49 52 4D 43 2D 46 49 45 4C 44 53 3A 0D 0A 3C 42 65 67 69 6E 3E 0D 0A 56 45 52 53 49 4F 4E 3A 0D 0A 4E 3B 43 48 41 52 53 45 54 3D 49 53 4F 2D 38 38 35 39 2D 31 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 37 5B 31 3D 31 35 3B 32 3D 31 35 5D 3A 3D 33 30 0D 0A 45 4D 41 49 4C 3B 54 59 50 45 3D 49 4E 54 45 52 4E 45 54 3A 3D 35 30 0D 0A 54 49 54 4C 45 3B 43 48 41 52 53 45 54 3D 49 53 4F 2D 38 38 35 39 2D 31 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 37 3A 3D 31 35 0D 0A 4F 52 47 3B 43 48 41 52 53 45 54 3D 49 53 4F 2D 38 38 35 39 2D 31 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 37 3A 3D 31 35 0D 0A 58 2D 54 45 4C 2D 54 59 50 45 53 3A 36 0D 0A 54 45 4C 3B 54 59 50 45 3D 57 4F 52 4B 3A 3D 34 30 0D 0A 54 45 4C 3B 54 59 50 45 3D 48 4F 4D 45 3A 3D 34 30 0D 0A 54 45 4C 3B 54 59 50 45 3D 43 45 4C 4C 3A 3D 34 30 0D 0A 54 45 4C 3B 54 59 50 45 3D 46 41 58 3A 3D 34 30 0D 0A 54 45 4C 3A 3D 34 30 0D 0A 58 2D 49 52 4D 43 2D 4C 55 49 44 3A 3D 31 32 0D 0A 52 45 56 3A 0D 0A 3C 45 6E 64 3E 0D 0A
13:57:03.20 ObexGet Fertig, Returncode=A0
13:57:03.20 Info.log:
Total-Records:98
Maximum-Records:*
Free-Records:379
DID:CB9B
IEL:0x08
HD:YES
SAT:CC
MCL:NO
ICL:NO
OCL:NO
X-IRMC-FIELDS:
<Begin>
VERSION:
N;CHARSET=ISO-8859-1;CHARSET=UTF-7[1=15;2=15]:=30
EMAIL;TYPE=INTERNET:=50
TITLE;CHARSET=ISO-8859-1;CHARSET=UTF-7:=15
ORG;CHARSET=ISO-8859-1;CHARSET=UTF-7:=15
X-TEL-TYPES:6
TEL;TYPE=WORK:=40
TEL;TYPE=HOME:=40
TEL;TYPE=CELL:=40
TEL;TYPE=FAX:=40
TEL:=40
X-IRMC-LUID:=12
REV:
<End>

13:57:03.20 OBEX Get: telecom/pb/luid/cc.Log
13:57:03.20 [TX]: 83 00 34 01 00 31 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 6C 00 75 00 69 00 64 00 2F 00 63 00 63 00 2E 00 4C 00 6F 00 67 00 00
13:57:03.23 [RX]: A0 00 0B 49 00 08 35 35 33 0D 0A
13:57:03.23 ObexGet Fertig, Returncode=A0
13:57:03.23 OBEX Get: telecom/pb/luid/553.log
13:57:03.23 [TX]: 83 00 36 01 00 33 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 6C 00 75 00 69 00 64 00 2F 00 35 00 35 00 33 00 2E 00 6C 00 6F 00 67 00 00
13:57:03.31 [RX]: A0 00 4D 49 00 4A 53 4E 3A 33 35 34 32 39 30 30 30 39 35 37 38 38 35 36 0D 0A 44 49 44 3A 43 42 39 42 0D 0A 54 6F 74 61 6C 2D 52 65 63 6F 72 64 73 3A 39 38 0D 0A 4D 61 78 69 6D 75 6D 2D 52 65 63 6F 72 64 73 3A 35 31 30 0D 0A 0D 0A
13:57:03.31 ObexGet Fertig, Returncode=A0
13:57:03.31 OBEX Put: telecom/pb/luid/000022010000.vcf
13:57:03.32 [TX]: 82 01 00 01 00 45 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 6C 00 75 00 69 00 64 00 2F 00 30 00 30 00 30 00 30 00 32 00 32 00 30 00 31 00 30 00 30 00 30 00 30 00 2E 00 76 00 63 00 66 00 00 C3 00 00 00 B0 49 00 B3 42 45 47 49 4E 3A 56 43 41 52 44 0D 0A 56 45 52 53 49 4F 4E 3A 32 2E 31 0D 0A 4E 3A 41 6E 64 65 72 73 73 6F 6E 3B 43 61 72 6C 0D 0A 54 45 4C 3B 48 4F 4D 45 3A 30 34 38 30 32 31 34 33 37 0D 0A 54 45 4C 3B 43 45 4C 4C 3A 30 37 30 39 34 34 34 35 30 33 0D 0A 41 44 52 3B 48 4F 4D 45 3B 43 48 41 52 53 45 54 3D 55 54 46 2D 38 3A 3B 3B 4E 2E 20 4C C3 A5 6E 67 67 2E 20 36 35 3B 4B 41 4C 4D 41 52 3B 3B 33 39 32 20 33 31 3B 0D 0A 58 2D 49 52 4D 43 2D 4C 55 49 44 3A 30 30 30 30 32 32 30 31 30 30 30 30 0D 0A 45 4E 44 3A 56 43 41 52 44
13:57:04.43 [RX]: A0 00 19 4C 00 16 01 0C 30 30 30 30 32 32 30 31 30 30 30 30 02 03 35 35 34
13:57:04.45 OBEX Get: telecom/pb/luid/000022010000.vcf
13:57:04.45 [TX]: 83 00 48 01 00 45 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 6C 00 75 00 69 00 64 00 2F 00 30 00 30 00 30 00 30 00 32 00 32 00 30 00 31 00 30 00 30 00 30 00 30 00 2E 00 76 00 63 00 66 00 00
13:57:04.73 [RX]: A0 00 80 49 00 7D 42 45 47 49 4E 3A 56 43 41 52 44 0D 0A 56 45 52 53 49 4F 4E 3A 32 2E 31 0D 0A 4E 3A 41 6E 64 65 72 73 73 6F 6E 3B 43 61 72 6C 0D 0A 54 45 4C 3B 48 4F 4D 45 3A 30 34 38 30 32 31 34 33 37 0D 0A 54 45 4C 3B 43 45 4C 4C 3A 30 37 30 39 34 34 34 35 30 33 0D 0A 58 2D 49 52 4D 43 2D 4C 55 49 44 3A 30 30 30 30 32 32 30 31 30 30 30 30 0D 0A 45 4E 44 3A 56 43 41 52 44 0D 0A
13:57:04.73 ObexGet Fertig, Returncode=A0
13:57:04.73 OBEX Get: telecom/pb/luid/cc.Log
13:57:04.75 [TX]: 83 00 34 01 00 31 00 74 00 65 00 6C 00 65 00 63 00 6F 00 6D 00 2F 00 70 00 62 00 2F 00 6C 00 75 00 69 00 64 00 2F 00 63 00 63 00 2E 00 4C 00 6F 00 67 00 00
13:57:04.76 [RX]: A0 00 0B 49 00 08 35 35 34 0D 0A
13:57:04.76 ObexGet Fertig, Returncode=A0
13:57:04.88 OBEX Disconnect
13:57:04.88 [TX]: 81 00 03
13:57:04.90 [RX]: A0 00 03
13:57:04.90 Disconnect hat funktioniert
13:57:04.90 Lese noch den OK-String
13:57:13.01 Settimeout: RT=1500 WT=800
13:57:13.01 [TX]: AT+CBC
13:57:13.06 [RX]: AT+CBC

13:57:13.06 [RX]: +CBC: 1,91
13:57:13.06 [RX]: OK
13:57:13.06 [TX]: AT+CSQ
13:57:13.10 [RX]: AT+CSQ

13:57:13.10 [RX]: +CSQ: 29,99
13:57:13.12 [RX]: OK

Site Admin Anmeldedatum: 15.02.2006 Beiträge: 31492 Wohnort: Tirol

Can you add an address manually by typing on your mobile ?

Gast

No I can´t.
Seems like the phone is limiting the program?

Time to get a new phone perhaps... Smile

Gast

Hello!

I have similar problem. When i am trying to sync my phone data i receive error like this:

"It is not possible to initiate OBEX protocol!
OBEX Error: NO CARRIER
Maybe this problem will be solved if you will restart your phone"

(sorry, that's my translate from polish)

Of course, restarting didn't help. Also reinstall Windows. It doesn't matter if i connect with phone by bluetooth or usb cable...

What is this OBEX protocol, and how i can solve my problem?

What is strange... on my laptop there is no problems, just on computer in my office...

Please, help!

Verfasst am: Mi Jan 03, 2007 16:09

Your problem is NOT similar to the problem above.
- restart the phone (take out the battery)
- retsart your PC
- try to sync
- post the logfile

Informationen zum Datenschutz auf dieser Website