FJ Software

We have a Samsung Galaxy Tab A
I'd like to sync to Outlook 2013. I know it can't do phone stuff (calls, SMS, etc) but I'd like to sync Contacts, Calendar, Tasks, Notes and Files).
I've tried to set it up but MPE says it can't find the Tab A. I've tried WiFi, Bluetooth and USB cord. I did set up USB debugging for the USB attempt.
Is this possible?

So is MPE installed on the tablet? Silly question I know ....
Can you see the tablet (wifi) from another device on the same network? That is, if you have a PC can you 'ping' the tablet from it? If not then maybe there is a firewall/router issue.

Yes, MPE is installed on the tablet AND I launched it on the tablet as opposed to letting the desktop app launch it.

The tablet and laptop are in the same room as the router less the 12 feet apart.

See below re the rest of the question...

Donnas-Tablet

IPv4 Address
10.0.0.252
IPv6 Address
2604b97f:5700:9c4a3ba5:9a9f
Local Link IPv6 Address
fe80:75ff:fe81:e80f
MAC Address
2E:0B:75:81:E8:0F
Comments
DHCP -59 dBm Wi-Fi 2.4G


C:\Windows\system32>ping 10.0.0.252

Pinging 10.0.0.252 with 32 bytes of data:
Reply from 10.0.0.252: bytes=32 time=457ms TTL=64
Reply from 10.0.0.252: bytes=32 time=242ms TTL=64
Reply from 10.0.0.252: bytes=32 time=148ms TTL=64
Reply from 10.0.0.252: bytes=32 time=484ms TTL=64

Ping statistics for 10.0.0.252:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 148ms, Maximum = 484ms, Average = 332ms

In case it matters, this laptop is already set up with MPE to sync to a Galaxy Note 4 phone and that works correctly. I'm trying to ADD the Tablet so we can sync with it as well.

Anyone have any further thoughts about this problem?

Just wondering if there's anything new with MPE that I haven't noticed.
Still hoping to sync a Samsung Galaxy TAB A (non-SIM version).
Thinking of files, photos, calendar, tasks, etc. I know messages wouldn't be included.

You have tried using the 'Add User' option ?

What error message are you seeing exactly ?
The following is displayed in the MPE client on the mobile phone:

I did nothing that I haven't tried before but it's now working.
Thanks for all your help.